From: akpm@osdl.org
To: torvalds@osdl.org
Cc: linux-kernel@vger.kernel.org, akpm@osdl.org, pavel@ucw.cz
Subject: [patch 118/198] fix u32 vs. pm_message_t in drivers/
Date: Tue, 12 Apr 2005 03:32:23 -0700 [thread overview]
Message-ID: <200504121032.j3CAWT1W005609@shell0.pdx.osdl.net> (raw)
From: Pavel Machek <pavel@ucw.cz>
-rc2-mm1 still contains few places where u32 and pm_message_t. This fixes
drivers/serial [should change no code].
Signed-off-by: Andrew Morton <akpm@osdl.org>
---
25-akpm/drivers/serial/amba-pl010.c | 2 +-
25-akpm/drivers/serial/imx.c | 2 +-
25-akpm/drivers/serial/pmac_zilog.c | 2 +-
25-akpm/drivers/serial/pxa.c | 2 +-
25-akpm/drivers/serial/s3c2410.c | 2 +-
25-akpm/drivers/serial/sa1100.c | 2 +-
25-akpm/drivers/serial/serial_txx9.c | 2 +-
25-akpm/drivers/serial/vr41xx_siu.c | 2 +-
8 files changed, 8 insertions(+), 8 deletions(-)
diff -puN drivers/serial/amba-pl010.c~fix-u32-vs-pm_message_t-in-drivers drivers/serial/amba-pl010.c
--- 25/drivers/serial/amba-pl010.c~fix-u32-vs-pm_message_t-in-drivers 2005-04-12 03:21:31.930282760 -0700
+++ 25-akpm/drivers/serial/amba-pl010.c 2005-04-12 03:21:31.943280784 -0700
@@ -772,7 +772,7 @@ static int pl010_remove(struct amba_devi
return 0;
}
-static int pl010_suspend(struct amba_device *dev, u32 state)
+static int pl010_suspend(struct amba_device *dev, pm_message_t state)
{
struct uart_amba_port *uap = amba_get_drvdata(dev);
diff -puN drivers/serial/imx.c~fix-u32-vs-pm_message_t-in-drivers drivers/serial/imx.c
--- 25/drivers/serial/imx.c~fix-u32-vs-pm_message_t-in-drivers 2005-04-12 03:21:31.931282608 -0700
+++ 25-akpm/drivers/serial/imx.c 2005-04-12 03:21:31.944280632 -0700
@@ -825,7 +825,7 @@ static struct uart_driver imx_reg = {
.cons = IMX_CONSOLE,
};
-static int serial_imx_suspend(struct device *_dev, u32 state, u32 level)
+static int serial_imx_suspend(struct device *_dev, pm_message_t state, u32 level)
{
struct imx_port *sport = dev_get_drvdata(_dev);
diff -puN drivers/serial/pmac_zilog.c~fix-u32-vs-pm_message_t-in-drivers drivers/serial/pmac_zilog.c
--- 25/drivers/serial/pmac_zilog.c~fix-u32-vs-pm_message_t-in-drivers 2005-04-12 03:21:31.933282304 -0700
+++ 25-akpm/drivers/serial/pmac_zilog.c 2005-04-12 03:21:31.946280328 -0700
@@ -1590,7 +1590,7 @@ static int pmz_detach(struct macio_dev *
}
-static int pmz_suspend(struct macio_dev *mdev, u32 pm_state)
+static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
{
struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev);
struct uart_state *state;
diff -puN drivers/serial/pxa.c~fix-u32-vs-pm_message_t-in-drivers drivers/serial/pxa.c
--- 25/drivers/serial/pxa.c~fix-u32-vs-pm_message_t-in-drivers 2005-04-12 03:21:31.934282152 -0700
+++ 25-akpm/drivers/serial/pxa.c 2005-04-12 03:21:31.946280328 -0700
@@ -797,7 +797,7 @@ static struct uart_driver serial_pxa_reg
.cons = PXA_CONSOLE,
};
-static int serial_pxa_suspend(struct device *_dev, u32 state, u32 level)
+static int serial_pxa_suspend(struct device *_dev, pm_message_t state, u32 level)
{
struct uart_pxa_port *sport = dev_get_drvdata(_dev);
diff -puN drivers/serial/s3c2410.c~fix-u32-vs-pm_message_t-in-drivers drivers/serial/s3c2410.c
--- 25/drivers/serial/s3c2410.c~fix-u32-vs-pm_message_t-in-drivers 2005-04-12 03:21:31.936281848 -0700
+++ 25-akpm/drivers/serial/s3c2410.c 2005-04-12 03:21:31.948280024 -0700
@@ -1156,7 +1156,7 @@ int s3c24xx_serial_remove(struct device
#ifdef CONFIG_PM
-int s3c24xx_serial_suspend(struct device *dev, u32 state, u32 level)
+int s3c24xx_serial_suspend(struct device *dev, pm_message_t state, u32 level)
{
struct uart_port *port = s3c24xx_dev_to_port(dev);
diff -puN drivers/serial/sa1100.c~fix-u32-vs-pm_message_t-in-drivers drivers/serial/sa1100.c
--- 25/drivers/serial/sa1100.c~fix-u32-vs-pm_message_t-in-drivers 2005-04-12 03:21:31.937281696 -0700
+++ 25-akpm/drivers/serial/sa1100.c 2005-04-12 03:21:31.949279872 -0700
@@ -854,7 +854,7 @@ static struct uart_driver sa1100_reg = {
.cons = SA1100_CONSOLE,
};
-static int sa1100_serial_suspend(struct device *_dev, u32 state, u32 level)
+static int sa1100_serial_suspend(struct device *_dev, pm_message_t state, u32 level)
{
struct sa1100_port *sport = dev_get_drvdata(_dev);
diff -puN drivers/serial/serial_txx9.c~fix-u32-vs-pm_message_t-in-drivers drivers/serial/serial_txx9.c
--- 25/drivers/serial/serial_txx9.c~fix-u32-vs-pm_message_t-in-drivers 2005-04-12 03:21:31.939281392 -0700
+++ 25-akpm/drivers/serial/serial_txx9.c 2005-04-12 03:21:31.949279872 -0700
@@ -1095,7 +1095,7 @@ static void __devexit pciserial_txx9_rem
}
}
-static int pciserial_txx9_suspend_one(struct pci_dev *dev, u32 state)
+static int pciserial_txx9_suspend_one(struct pci_dev *dev, pm_message_t state)
{
int line = (int)(long)pci_get_drvdata(dev);
diff -puN drivers/serial/vr41xx_siu.c~fix-u32-vs-pm_message_t-in-drivers drivers/serial/vr41xx_siu.c
--- 25/drivers/serial/vr41xx_siu.c~fix-u32-vs-pm_message_t-in-drivers 2005-04-12 03:21:31.940281240 -0700
+++ 25-akpm/drivers/serial/vr41xx_siu.c 2005-04-12 03:21:31.950279720 -0700
@@ -1026,7 +1026,7 @@ static int siu_remove(struct device *dev
return 0;
}
-static int siu_suspend(struct device *dev, u32 state, u32 level)
+static int siu_suspend(struct device *dev, pm_message_t state, u32 level)
{
struct uart_port *port;
int i;
_
reply other threads:[~2005-04-12 19:11 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200504121032.j3CAWT1W005609@shell0.pdx.osdl.net \
--to=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®