Re: CDR read problems with 2.6.11?

[Bradley Reed <bradreed1@gmail.com>]

On Thu, 14 Apr 2005 02:03:07 +0200
"Bernd Schubert" <Bernd.Schubert@tc.pci.uni-heidelberg.de> wrote:

> I have seen exactly the same on my fathers computer and could solve this
> by not starting the udftools. Didn't have the time to digg further into
> this... 
> Can you confirm thats really a udf problem? Just run
> "/etc/init.d/udftools stop" or the similar for your distribution and try
> mounting again.
> 

I am not running udftools. In fact it isn't even installed (not part of
Slackware 10.1).  I'm trying to burn an iso9660 on a CDR using cdrecord.

There seems to be issues with CD burning under 2.6.11. I make an iso, and I
burn it to CDR with 2.6.11 and again with 2.4.28 on the same laptop/same DVD
+RW drive. The disk burnt under 2.4 is fine, md5sums all ok, can be read
under both kernels. The disk burnt under 2.6.11 burns without error from
cdrecord/k3b/etc, but afterwards is not readable under 2.6.11. It is readable
under 2.4.28, but the md5sums are not 100% correct, basically making 2.6.11
useless for making backups to CDR.

Brad