Re: [Linux-usb-users] 2.6 PCMCIA/USB question

[Joerg Pommnitz <pommnitz@yahoo.com>]

I had hoped that one can figure things out from /proc and /sys. SHould'n
there be a way to do this? And no, trial and error is not really an
option. The devices in question are WCDMA/UMTS mobile data cards. They
will differ only by the SIM card inserted by the user. The ICCID of the
SIM is unknown during development and I would like to avoid to many
configuration files.

Regards
  Joerg

--- Alan Stern <stern@rowland.harvard.edu> wrote:
> On Fri, 15 Apr 2005, Joerg Pommnitz wrote:
> 
> > Hello all,
> > I have a question that I could not figure out from other sources. I
> have
> > the following hardware: an integrated CardBus USB host adapter with a
> > connected USB serial device with three interfaces (normally
> > ttyUSB0...ttyUSB2). Now I want to use 3 of these devices (remember:
> they
> > are integrated, so I can't just plug the USB device onto the same host
> > adapter). I know device A is in CardBus slot 1, device B is in CardBus
> > slot 2 and so on. 
> > 
> > Now the question: How do I figure out which ttyUSBx belongs to which
> > device?
> 
> You can look in the system log.  If you want, you can actually control 
> which goes where by creating a udev configuration file.
> 
> Alan Stern
> 
> 


	
		
___________________________________________________________ 
Gesendet von Yahoo! Mail - Jetzt mit 250MB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de