From: Grant Grundler <grundler@parisc-linux.org>
To: Adrian Bunk <bunk@stusta.de>
Cc: gregkh@suse.de, linux-kernel@vger.kernel.org,
linux-pci@atrey.karlin.mff.cuni.cz
Subject: Re: [RFC: 2.6 patch] drivers/pci/pci.c: remove pci_dac_set_dma_mask
Date: Sun, 1 May 2005 09:37:09 -0600 [thread overview]
Message-ID: <20050501153709.GB17998@colo.lackof.org> (raw)
In-Reply-To: <20050501135308.GC3592@stusta.de>
On Sun, May 01, 2005 at 03:53:08PM +0200, Adrian Bunk wrote:
> pci_dac_set_dma_mask is currently completely unused.
>
> Is any usage planned in the forseeable future or is this patch to remove
> it OK?
I think so. Drivers call pci_set_dma_mask() and check the return code.
Documentation/DMA-mapping.txt needs to be updated too:
| The first thing your driver needs to do is query the PCI platform
| layer with your devices DAC addressing capabilities:
|
| int pci_dac_set_dma_mask(struct pci_dev *pdev, u64 mask);
|
| This routine behaves identically to pci_set_dma_mask. You may not
| use the following interfaces if this routine fails.
thanks,
grant
>
> Signed-off-by: Adrian Bunk <bunk@stusta.de>
>
> ---
>
> arch/arm/mach-ixp4xx/common-pci.c | 10 ----------
> drivers/pci/pci.c | 12 ------------
> include/linux/pci.h | 2 --
> 3 files changed, 24 deletions(-)
>
> --- linux-2.6.12-rc3-mm1-full/include/linux/pci.h.old 2005-04-30 22:56:24.000000000 +0200
> +++ linux-2.6.12-rc3-mm1-full/include/linux/pci.h 2005-04-30 22:56:31.000000000 +0200
> @@ -815,7 +815,6 @@
> int pci_set_mwi(struct pci_dev *dev);
> void pci_clear_mwi(struct pci_dev *dev);
> int pci_set_dma_mask(struct pci_dev *dev, u64 mask);
> -int pci_dac_set_dma_mask(struct pci_dev *dev, u64 mask);
> int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask);
> int pci_assign_resource(struct pci_dev *dev, int i);
>
> @@ -946,7 +945,6 @@
> static inline int pci_enable_device(struct pci_dev *dev) { return -EIO; }
> static inline void pci_disable_device(struct pci_dev *dev) { }
> static inline int pci_set_dma_mask(struct pci_dev *dev, u64 mask) { return -EIO; }
> -static inline int pci_dac_set_dma_mask(struct pci_dev *dev, u64 mask) { return -EIO; }
> static inline int pci_assign_resource(struct pci_dev *dev, int i) { return -EBUSY;}
> static inline int pci_register_driver(struct pci_driver *drv) { return 0;}
> static inline void pci_unregister_driver(struct pci_driver *drv) { }
> --- linux-2.6.12-rc3-mm1-full/drivers/pci/pci.c.old 2005-04-30 22:56:39.000000000 +0200
> +++ linux-2.6.12-rc3-mm1-full/drivers/pci/pci.c 2005-04-30 22:57:07.000000000 +0200
> @@ -806,17 +806,6 @@
> }
>
> int
> -pci_dac_set_dma_mask(struct pci_dev *dev, u64 mask)
> -{
> - if (!pci_dac_dma_supported(dev, mask))
> - return -EIO;
> -
> - dev->dma_mask = mask;
> -
> - return 0;
> -}
> -
> -int
> pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
> {
> if (!pci_dma_supported(dev, mask))
> @@ -878,7 +867,6 @@
> EXPORT_SYMBOL(pci_set_mwi);
> EXPORT_SYMBOL(pci_clear_mwi);
> EXPORT_SYMBOL(pci_set_dma_mask);
> -EXPORT_SYMBOL(pci_dac_set_dma_mask);
> EXPORT_SYMBOL(pci_set_consistent_dma_mask);
> EXPORT_SYMBOL(pci_assign_resource);
> EXPORT_SYMBOL(pci_find_parent_resource);
> --- linux-2.6.12-rc3-mm1-full/arch/arm/mach-ixp4xx/common-pci.c.old 2005-04-30 22:57:22.000000000 +0200
> +++ linux-2.6.12-rc3-mm1-full/arch/arm/mach-ixp4xx/common-pci.c 2005-04-30 22:57:29.000000000 +0200
> @@ -502,15 +502,6 @@
> }
>
> int
> -pci_dac_set_dma_mask(struct pci_dev *dev, u64 mask)
> -{
> - if (mask >= SZ_64M - 1 )
> - return 0;
> -
> - return -EIO;
> -}
> -
> -int
> pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
> {
> if (mask >= SZ_64M - 1 )
> @@ -520,7 +511,6 @@
> }
>
> EXPORT_SYMBOL(pci_set_dma_mask);
> -EXPORT_SYMBOL(pci_dac_set_dma_mask);
> EXPORT_SYMBOL(pci_set_consistent_dma_mask);
> EXPORT_SYMBOL(ixp4xx_pci_read);
> EXPORT_SYMBOL(ixp4xx_pci_write);
prev parent reply other threads:[~2005-05-01 15:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-01 13:53 Adrian Bunk
2005-05-01 15:37 ` Grant Grundler [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050501153709.GB17998@colo.lackof.org \
--to=grundler@parisc-linux.org \
--cc=bunk@stusta.de \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@atrey.karlin.mff.cuni.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®