From: Andrew Morton <akpm@osdl.org>
To: dedekind@infradead.org
Cc: linux-kernel@vger.kernel.org, jgarzik@pobox.com,
linux-scsi@vger.kernel.org
Subject: Re: [OOPS] 2.6.12-rc4 oops
Date: Tue, 17 May 2005 18:08:47 -0700 [thread overview]
Message-ID: <20050517180847.6fb0e204.akpm@osdl.org> (raw)
In-Reply-To: <1116345116.8079.12.camel@sauron.oktetlabs.ru>
"Artem B. Bityuckiy" <dedekind@infradead.org> wrote:
>
> When I copied a lot of data (>10GB) from ext3 partition to reiserfs
> partition and compiled linux on the ext3 partition at the same time i
> got the following oops:
>
> ata1: command 0x25 timeout, stat 0xd0 host_stat 0x21
> ata1: status=0xd0 { Busy }
> end_request: I/O error, dev sda, sector 49947775
> ATA: abnormal status 0xD0 on port 0xEFE7
> ATA: abnormal status 0xD0 on port 0xEFE7
> ATA: abnormal status 0xD0 on port 0xEFE7
> ...
> ata1: command 0x25 timeout, stat 0xd0 host_stat 0x21
> ata1: status=0xd0 { Busy }
> end_request: I/O error, dev sda, sector 53178303
> ATA: abnormal status 0xD0 on port 0xEFE7
> ATA: abnormal status 0xD0 on port 0xEFE7
> ATA: abnormal status 0xD0 on port 0xEFE7
> ata1: command 0x25 timeout, stat 0xd0 host_stat 0x21
> ata1: status=0xd0 { Busy }
> end_request: I/O error, dev sda, sector 2621519
> EXT3-fs error (device sda1): ext3_get_inode_loc: unable to read inode
> block - inode=161624, block=327682
> Aborting journal on device sda1.
> ATA: abnormal status 0xD0 on port 0xEFE7
> ATA: abnormal status 0xD0 on port 0xEFE7
> ATA: abnormal status 0xD0 on port 0xEFE7
> ata1: command 0x25 timeout, stat 0xd0 host_stat 0x21
> ata1: status=0xd0 { Busy }
> end_request: I/O error, dev sda, sector 2621535
> ATA: abnormal status 0xD0 on port 0xEFE7
> ATA: abnormal status 0xD0 on port 0xEFE7
> ATA: abnormal status 0xD0 on port 0xEFE7
> EXT3-fs error (device sda1): ext3_get_inode_loc: unable to read inode
> block - inode=161685, block=327684
> ata1: command 0x25 timeout, stat 0xd0 host_stat 0x21
> ata1: status=0xd0 { Busy }
> end_request: I/O error, dev sda, sector 2967775
> EXT3-fs error (device sda1): ext3_find_entry: reading directory #181451
> offset 0
> ATA: abnormal status 0xD0 on port 0xEFE7
> ATA: abnormal status 0xD0 on port 0xEFE7
> ATA: abnormal status 0xD0 on port 0xEFE7
> Unable to handle kernel paging request at virtual address d3562eac
> printing eip:
> e0853769
> *pde = 00000000
> Oops: 0002 [#1]
> PREEMPT SMP DEBUG_PAGEALLOC
> Modules linked in: reiserfs nfsd exportfs md5 ipv6 autofs4 nfs lockd
> sunrpc sk98lin microcode uhci_hcd ehci_hcd video button battery ac sd
> _mod sr_mod ext3 jbd dm_mod ata_piix libata scsi_mod
> CPU: 0
> EIP: 0060:[<e0853769>] Not tainted VLI
> EFLAGS: 00010002 (2.6.12-rc4-smp-preempt)
> EIP is at scsi_eh_scmd_add+0x59/0x90 [scsi_mod]
> eax: dfc1205c ebx: 00000001 ecx: d3562eac edx: d3e61eac
> esi: d3e61e94 edi: dfc12000 ebp: c03d1efc esp: c03d1eec
> ds: 007b es: 007b ss: 0068
> Process swapper (pid: 0, threadinfo=c03d0000 task=c036cc40)
> Stack: 00000286 d3e61e94 00000101 c1405ee0 c03d1f1c e08538ec c1405e80
> c03d1f18
> c03d1f1c 00000286 c03d1f1c d3e61e94 c03d1f58 c012add6 c03d1f2c
> c031d0a2
> c03d1f38 c036cc40 c03d1f40 c03d0000 e08538a0 c03d1f40 c03d1f40
> 000f4354
> Call Trace:
> [<c010412a>] show_stack+0x7a/0x90
> [<c01042b6>] show_registers+0x156/0x1c0
> [<c01044d0>] die+0x100/0x180
> [<c0119026>] do_page_fault+0x356/0x6dd
> [<c0103d7b>] error_code+0x4f/0x54
> [<e08538ec>] scsi_times_out+0x4c/0xc0 [scsi_mod]
> [<c012add6>] run_timer_softirq+0xe6/0x1b0
> [<c0126c3b>] __do_softirq+0xdb/0x100
> [<c0126cad>] do_softirq+0x4d/0x50
> [<c0126dae>] irq_exit+0x4e/0x50
> [<c0103cd4>] apic_timer_interrupt+0x1c/0x24
> [<c0101121>] cpu_idle+0x71/0x90
> [<c03d29bc>] start_kernel+0x18c/0x1d0
> [<c010020e>] 0xc010020e
> Code: 89 f6 8b 47 3c e8 78 95 ac df 09 5e 24 8d 56 18 89 45 f0 8d 47 5c
> 66 c7 46 0a 03 01 66 c7 46 08 02 10 8b 48 04 89 46 18 89 50 04 <89
> > 11 89 4a 04 f0 0f ba af 0c 01 00 00 03 ff 87 98 00 00 00 89
> <0>Kernel panic - not syncing: Fatal exception in interrupt
Please describe the I/O setup. Serial ATA? Which driver, what type of
hardware?
next prev parent reply other threads:[~2005-05-18 1:11 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-17 15:51 Artem B. Bityuckiy
2005-05-18 1:08 ` Andrew Morton [this message]
2005-05-18 7:18 ` Artem B. Bityuckiy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050517180847.6fb0e204.akpm@osdl.org \
--to=akpm@osdl.org \
--cc=dedekind@infradead.org \
--cc=jgarzik@pobox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®