From: Chris Wright <chrisw@osdl.org>
To: linux-kernel@vger.kernel.org, stable@kernel.org
Cc: Justin Forbes <jmforbes@linuxtx.org>,
Zwane Mwaikambo <zwane@arm.linux.org.uk>,
"Theodore Ts'o" <tytso@mit.edu>,
Randy Dunlap <rdunlap@xenotime.net>,
Chuck Wolber <chuckw@quantumlinux.com>,
torvalds@osdl.org, akpm@osdl.org, alan@lxorguk.ukuu.org.uk
Subject: [patch 11/16] USB: fix bug in visor driver with throttle/unthrottle causing oopses.
Date: Mon, 23 May 2005 16:28:03 -0700 [thread overview]
Message-ID: <20050523232803.GW27549@shell0.pdx.osdl.net> (raw)
In-Reply-To: <20050523231529.GL27549@shell0.pdx.osdl.net>
Thanks to Mark Lord <mlord@pobox.com> for reporting this and helping with testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/visor.c | 38 +++++++++++++++++++++++++++-----------
1 files changed, 27 insertions(+), 11 deletions(-)
--- linux-2.6.11.10.orig/drivers/usb/serial/visor.c 2005-05-16 10:50:37.000000000 -0700
+++ linux-2.6.11.10/drivers/usb/serial/visor.c 2005-05-20 09:36:44.139463608 -0700
@@ -386,6 +386,7 @@
int bytes_in;
int bytes_out;
int outstanding_urbs;
+ int throttled;
};
/* number of outstanding urbs to prevent userspace DoS from happening */
@@ -415,6 +416,7 @@
priv->bytes_in = 0;
priv->bytes_out = 0;
priv->outstanding_urbs = 0;
+ priv->throttled = 0;
spin_unlock_irqrestore(&priv->lock, flags);
/*
@@ -602,6 +604,7 @@
struct tty_struct *tty;
unsigned long flags;
int i;
+ int throttled;
int result;
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -627,18 +630,21 @@
}
spin_lock_irqsave(&priv->lock, flags);
priv->bytes_in += urb->actual_length;
+ throttled = priv->throttled;
spin_unlock_irqrestore(&priv->lock, flags);
- /* Continue trying to always read */
- usb_fill_bulk_urb (port->read_urb, port->serial->dev,
- usb_rcvbulkpipe(port->serial->dev,
- port->bulk_in_endpointAddress),
- port->read_urb->transfer_buffer,
- port->read_urb->transfer_buffer_length,
- visor_read_bulk_callback, port);
- result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
- if (result)
- dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+ /* Continue trying to always read if we should */
+ if (!throttled) {
+ usb_fill_bulk_urb (port->read_urb, port->serial->dev,
+ usb_rcvbulkpipe(port->serial->dev,
+ port->bulk_in_endpointAddress),
+ port->read_urb->transfer_buffer,
+ port->read_urb->transfer_buffer_length,
+ visor_read_bulk_callback, port);
+ result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+ if (result)
+ dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+ }
return;
}
@@ -683,16 +689,26 @@
static void visor_throttle (struct usb_serial_port *port)
{
+ struct visor_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+
dbg("%s - port %d", __FUNCTION__, port->number);
- usb_kill_urb(port->read_urb);
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->throttled = 1;
+ spin_unlock_irqrestore(&priv->lock, flags);
}
static void visor_unthrottle (struct usb_serial_port *port)
{
+ struct visor_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
int result;
dbg("%s - port %d", __FUNCTION__, port->number);
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->throttled = 0;
+ spin_unlock_irqrestore(&priv->lock, flags);
port->read_urb->dev = port->serial->dev;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
next prev parent reply other threads:[~2005-05-23 23:40 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-05-23 23:15 [00/16] -stable review Chris Wright
2005-05-23 23:17 ` [patch 01/16] Fix get_unmapped_area sanity tests Chris Wright
2005-05-23 23:18 ` [patch 02/16] 3c59x: only put the device into D3 when we're actually using WOL Chris Wright
2005-05-25 17:30 ` Daniel Ritz
2005-05-23 23:19 ` [patch 03/16] [EBTABLES]: Fix smp race Chris Wright
2005-05-23 23:20 ` [patch 04/16] ext3: fix race between ext3 make block reservation and reservation window discard Chris Wright
2005-05-30 13:28 ` Rodrigo Steinmüller Wanderley
2005-05-31 6:23 ` Mingming Cao
2005-05-23 23:21 ` [patch 05/16] PPC64: Fix LPAR IOMMU setup code for p630 Chris Wright
2005-05-23 23:22 ` [patch 06/16] Fix matroxfb on big-endian hardware Chris Wright
2005-05-23 23:50 ` Al Viro
2005-05-24 1:17 ` Chris Wright
2005-05-24 10:15 ` Petr Vandrovec
2005-05-23 23:24 ` [patch 07/16] ide-disk: Fix LBA8 DMA Chris Wright
2005-05-23 23:25 ` [patch 08/16] [ROSE]: Fix minor security hole Chris Wright
2005-05-23 23:26 ` [patch 09/16] usbaudio: prevent oops & dead keyboard on usb unplugging Chris Wright
2005-05-23 23:27 ` [patch 10/16] usbusx2y: " Chris Wright
2005-05-23 23:28 ` Chris Wright [this message]
2005-05-23 23:29 ` [patch 12/16] x86_64: check if ptrace RIP is canonical Chris Wright
2005-05-23 23:30 ` [patch 13/16] x86_64: Fix canonical checking for segment registers in ptrace Chris Wright
2005-05-23 23:30 ` [patch 14/16] x86_64: Add a guard page at the end of the 47bit address space Chris Wright
2005-05-23 23:31 ` [patch 15/16] x86_64: When checking vmalloc mappings don't use pte_page Chris Wright
2005-05-23 23:32 ` [patch 16/16] x86_64: Don't look up struct page pointer of physical address in iounmap Chris Wright
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050523232803.GW27549@shell0.pdx.osdl.net \
--to=chrisw@osdl.org \
--cc=akpm@osdl.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=chuckw@quantumlinux.com \
--cc=jmforbes@linuxtx.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rdunlap@xenotime.net \
--cc=stable@kernel.org \
--cc=torvalds@osdl.org \
--cc=tytso@mit.edu \
--cc=zwane@arm.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®