mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ashok Raj <ashok.raj@intel.com>
To: Andi Kleen <ak@muc.de>, Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org, discuss@x86-64.org,
	Rusty Russell <rusty@rustycorp.com.au>,
	Srivattsa Vaddagiri <vatsa@in.ibm.com>,
	Zwane Mwaikambo <zwane@arm.linux.org.uk>,
	Ashok Raj <ashok.raj@intel.com>
Subject: [patch 3/5] x86_64: CPU hotplug sibling map cleanup
Date: Thu, 02 Jun 2005 05:57:58 -0700	[thread overview]
Message-ID: <20050602130111.931715000@araj-em64t> (raw)
In-Reply-To: <20050602125754.993470000@araj-em64t>

[-- Attachment #1: x86_64-sibling-map-fixup.patch --]
[-- Type: text/plain, Size: 3258 bytes --]

This patch is a minor cleanup to the cpu sibling/core map.
It is required that this setup happens on a per-cpu bringup
time.

Signed-off-by: Ashok Raj <ashok.raj@intel.com>
------------------------------
 arch/x86_64/kernel/smpboot.c |   82 ++++++++++++++++++-------------------------
 1 files changed, 36 insertions(+), 46 deletions(-)

Index: linux-2.6.12-rc5-mm2/arch/x86_64/kernel/smpboot.c
===================================================================
--- linux-2.6.12-rc5-mm2.orig/arch/x86_64/kernel/smpboot.c
+++ linux-2.6.12-rc5-mm2/arch/x86_64/kernel/smpboot.c
@@ -445,6 +445,34 @@ void __cpuinit smp_callin(void)
 	cpu_set(cpuid, cpu_callin_map);
 }
 
+static inline void
+set_cpu_sibling_map(int cpu)
+{
+	int i;
+
+	if (smp_num_siblings > 1) {
+		for_each_cpu(i) {
+			if (cpu_core_id[cpu] == cpu_core_id[i]) {
+				cpu_set(i, cpu_sibling_map[cpu]);
+				cpu_set(cpu, cpu_sibling_map[i]);
+			}
+		}
+	} else {
+		cpu_set(cpu, cpu_sibling_map[cpu]);
+	}
+
+	if (current_cpu_data.x86_num_cores > 1) {
+		for_each_cpu(i) {
+			if (phys_proc_id[cpu] == phys_proc_id[i]) {
+				cpu_set(i, cpu_core_map[cpu]);
+				cpu_set(cpu, cpu_core_map[i]);
+			}
+		}
+	} else {
+		cpu_core_map[cpu] = cpu_sibling_map[cpu];
+	}
+}
+
 /*
  * Setup code on secondary processor (after comming out of the trampoline)
  */
@@ -475,6 +503,12 @@ void __cpuinit start_secondary(void)
 	enable_APIC_timer();
 
 	/*
+	 * The sibling maps must be set before turing the online map on for
+	 * this cpu
+	 */
+	set_cpu_sibling_map(smp_processor_id());
+
+	/*
 	 * Allow the master to continue.
 	 */
 	lock_ipi_call_lock();
@@ -809,51 +843,6 @@ cycles_t cacheflush_time;
 unsigned long cache_decay_ticks;
 
 /*
- * Construct cpu_sibling_map[], so that we can tell the sibling CPU
- * on SMT systems efficiently.
- */
-static __cpuinit void detect_siblings(void)
-{
-	int cpu;
-
-	for (cpu = 0; cpu < NR_CPUS; cpu++) {
-		cpus_clear(cpu_sibling_map[cpu]);
-		cpus_clear(cpu_core_map[cpu]);
-	}
-
-	for_each_online_cpu (cpu) {
-		struct cpuinfo_x86 *c = cpu_data + cpu;
-		int siblings = 0;
-		int i;
-		if (smp_num_siblings > 1) {
-			for_each_online_cpu (i) {
-				if (cpu_core_id[cpu] == cpu_core_id[i]) {
-					siblings++;
-					cpu_set(i, cpu_sibling_map[cpu]);
-				}
-			}
-		} else {
-			siblings++;
-			cpu_set(cpu, cpu_sibling_map[cpu]);
-		}
-
-		if (siblings != smp_num_siblings) {
-			printk(KERN_WARNING
-	       "WARNING: %d siblings found for CPU%d, should be %d\n",
-			       siblings, cpu, smp_num_siblings);
-			smp_num_siblings = siblings;
-		}
-		if (c->x86_num_cores > 1) {
-			for_each_online_cpu(i) {
-				if (phys_proc_id[cpu] == phys_proc_id[i])
-					cpu_set(i, cpu_core_map[cpu]);
-			}
-		} else
-			cpu_core_map[cpu] = cpu_sibling_map[cpu];
-	}
-}
-
-/*
  * Cleanup possible dangling ends...
  */
 static __cpuinit void smp_cleanup_boot(void)
@@ -1040,6 +1029,8 @@ void __init smp_prepare_boot_cpu(void)
 	int me = smp_processor_id();
 	cpu_set(me, cpu_online_map);
 	cpu_set(me, cpu_callout_map);
+	cpu_set(0, cpu_sibling_map[0]);
+	cpu_set(0, cpu_core_map[0]);
 }
 
 /*
@@ -1099,7 +1090,6 @@ void __init smp_cpus_done(unsigned int m
 	setup_ioapic_dest();
 #endif
 
-	detect_siblings();
 	time_init_gtod();
 
 	check_nmi_watchdog();

--


  parent reply	other threads:[~2005-06-02 13:01 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-06-02 12:57 [patch 0/5] x86_64 CPU hotplug patch series Ashok Raj
2005-06-02 12:57 ` [patch 1/5] x86_64: Change init sections for CPU hotplug support Ashok Raj
2005-06-02 20:14   ` Zwane Mwaikambo
2005-06-02 23:19     ` Ashok Raj
2005-06-02 12:57 ` [patch 2/5] x86_64: " Ashok Raj
2005-06-02 20:19   ` Zwane Mwaikambo
2005-06-02 23:33     ` Ashok Raj
2005-06-02 23:45       ` Zwane Mwaikambo
2005-06-03  0:08         ` Ashok Raj
2005-06-03  2:01       ` Shaohua Li
2005-06-03 14:25         ` Ashok Raj
2005-06-02 12:57 ` Ashok Raj [this message]
2005-06-02 12:57 ` [patch 4/5] x86_64: Dont use broadcast shortcut to make it cpu hotplug safe Ashok Raj
2005-06-02 12:58 ` [patch 5/5] x86_64: Provide ability to choose using shortcuts for IPI in flat mode Ashok Raj
2005-06-02 20:10   ` Zwane Mwaikambo
2005-06-02 23:15     ` Ashok Raj
2005-06-02 20:25 ` [patch 0/5] x86_64 CPU hotplug patch series Zwane Mwaikambo
2005-06-03 16:35   ` Andi Kleen
2005-06-03 17:15     ` Ashok Raj

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20050602130111.931715000@araj-em64t \
    --to=ashok.raj@intel.com \
    --cc=ak@muc.de \
    --cc=akpm@osdl.org \
    --cc=discuss@x86-64.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rusty@rustycorp.com.au \
    --cc=vatsa@in.ibm.com \
    --cc=zwane@arm.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®