Re: Kernel 2.6.12-rc6-mm1 & Chelsio driver

[Lukas Hejtmanek <xhejtman@mail.muni.cz>]

On Wed, Jun 08, 2005 at 01:05:28PM -0700, Scott Bardone wrote:
> There is one thing you could do though. If want, you could hack the TOE 
> driver to work with the latest kernel in NIC mode. You would need to 
> disable all the offload functions. Copy the source into the kernel tree, 
> then when you build it you will see the unresolved symbols. Disable those 
> sections of code, then you should end up with a NIC driver which will run 
> on the latest kernel.

I have ported your driver for kernel 2.6.6 to kernel 2.6.8 and 2.6.11.12, it
seems that it works (including TOE).

test3:~ # cat /proc/net/toe/devices 
Device           Offload Module       Interfaces
toe0             Chelsio T1           eth0
test3:~ # uname -a
Linux test3 2.6.11.12 #3 SMP Fri Jun 17 01:15:03 CEST 2005 x86_64 x86_64 x86_64
GNU/Linux
test3:~ # 

I can provide patch to mailing list if it is allowed.

-- 
Lukáš Hejtmánek