From: domen@coderock.org
To: emoenke@gwdg.de
Cc: linux-kernel@vger.kernel.org,
Nishanth Aravamudan <nacc@us.ibm.com>,
domen@coderock.org
Subject: [patch 4/4] cdrom/mcdx: remove interruptible_sleep_on_timeout() usage
Date: Mon, 20 Jun 2005 23:51:50 +0200 [thread overview]
Message-ID: <20050620215150.417217000@nd47.coderock.org> (raw)
[-- Attachment #1: int_sleep_on-drivers_cdrom_mcdx.patch --]
[-- Type: text/plain, Size: 3740 bytes --]
From: Nishanth Aravamudan <nacc@us.ibm.com>
Remove deprecated interruptible_sleep_on_timeout() function calls
and replace with direct wait-queue usage or wait_event() as appropriate. The
former replacements result in the same code. The latter change the tasks from
interruptible to uninterruptible, as signals were not being checked in the
current code. The corresponding wake_up() calls were fixed as well. This patch
will result in some slightly different debug output (for instance, one output
instead of one per iteration). Patch is compile-tested.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
---
mcdx.c | 33 +++++++++++++++++----------------
1 files changed, 17 insertions(+), 16 deletions(-)
Index: quilt/drivers/cdrom/mcdx.c
===================================================================
--- quilt.orig/drivers/cdrom/mcdx.c
+++ quilt/drivers/cdrom/mcdx.c
@@ -67,6 +67,7 @@ static const char *mcdx_c_version
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/init.h>
+#include <linux/wait.h>
#include <asm/io.h>
#include <asm/current.h>
#include <asm/uaccess.h>
@@ -835,11 +836,14 @@ static void mcdx_delay(struct s_drive_st
* May be we could use a simple count loop w/ jumps to itself, but
* I wanna make this independent of cpu speed. [1 jiffy is 1/HZ] sec */
{
+ DEFINE_WAIT(wait);
if (jifs < 0)
return;
xtrace(SLEEP, "*** delay: sleepq\n");
- interruptible_sleep_on_timeout(&stuff->sleepq, jifs);
+ prepare_to_wait(&stuff->sleepq, &wait, TASK_INTERRUPTIBLE);
+ schedule_timeout(jifs);
+ finish_wait(&stuff->sleepq, &wait);
xtrace(SLEEP, "delay awoken\n");
if (signal_pending(current)) {
xtrace(SLEEP, "got signal\n");
@@ -907,11 +911,9 @@ static int mcdx_talk(struct s_drive_stuf
if ((discard = (buffer == NULL)))
buffer = &c;
- while (stuffp->lock) {
- xtrace(SLEEP, "*** talk: lockq\n");
- interruptible_sleep_on(&stuffp->lockq);
- xtrace(SLEEP, "talk: awoken\n");
- }
+ xtrace(SLEEP, "*** talk: lockq\n");
+ wait_event(stuffp->lockq, !stuffp->lock);
+ xtrace(SLEEP, "talk: awoken\n");
stuffp->lock = 1;
@@ -998,7 +1000,7 @@ static int mcdx_talk(struct s_drive_stuf
#endif
stuffp->lock = 0;
- wake_up_interruptible(&stuffp->lockq);
+ wake_up(&stuffp->lockq);
xtrace(TALK, "talk() done with 0x%02x\n", st);
return st;
@@ -1320,6 +1322,7 @@ static int mcdx_xfer(struct s_drive_stuf
Return: -1 on timeout or other error
else status byte (as in stuff->st) */
{
+ DEFINE_WAIT(wait);
int border;
int done = 0;
long timeout;
@@ -1334,9 +1337,7 @@ static int mcdx_xfer(struct s_drive_stuf
return -1;
}
- while (stuffp->lock) {
- interruptible_sleep_on(&stuffp->lockq);
- }
+ wait_event(stuffp->lockq, !stuffp->lock);
if (stuffp->valid && (sector >= stuffp->pending)
&& (sector < stuffp->low_border)) {
@@ -1358,10 +1359,10 @@ static int mcdx_xfer(struct s_drive_stuf
do {
while (stuffp->busy) {
-
- timeout =
- interruptible_sleep_on_timeout
- (&stuffp->busyq, 5 * HZ);
+ prepare_to_wait(&stuffp->busyq, &wait,
+ TASK_INTERRUPTIBLE);
+ timeout = schedule_timeout(5*HZ);
+ finish_wait(&stuffp->busyq, &wait);
if (!stuffp->introk) {
xtrace(XFER,
@@ -1377,7 +1378,7 @@ static int mcdx_xfer(struct s_drive_stuf
stuffp->busy = 0;
stuffp->valid = 0;
- wake_up_interruptible(&stuffp->lockq);
+ wake_up(&stuffp->lockq);
xtrace(XFER, "transfer() done (-1)\n");
return -1;
}
@@ -1413,7 +1414,7 @@ static int mcdx_xfer(struct s_drive_stuf
} while (++(stuffp->pending) < border);
stuffp->lock = 0;
- wake_up_interruptible(&stuffp->lockq);
+ wake_up(&stuffp->lockq);
} else {
--
reply other threads:[~2005-06-20 23:57 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050620215150.417217000@nd47.coderock.org \
--to=domen@coderock.org \
--cc=emoenke@gwdg.de \
--cc=linux-kernel@vger.kernel.org \
--cc=nacc@us.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®