Re: SMP+irq handling broken in current git?

[Bjorn Helgaas <bjorn.helgaas@hp.com>]

[-- Attachment #1: Type: text/plain, Size: 620 bytes --]

On Thursday 23 June 2005 12:42 pm, Jens Axboe wrote:
> On Thu, Jun 23 2005, Jeff Garzik wrote:
> > Jens Axboe wrote:
> > >Hi,
> > >
> > >Something strange is going on with current git as of this morning (head
> > >ee98689be1b054897ff17655008c3048fe88be94). On an old test box (dual p3
> > >800MHz), using the same old config I always do on this box has very
> > >broken interrupt handling:
> > 
> > Does 2.6.12 work for you?
> > 2.6.11?
> 
> 2.6.11 works, 2.6.12 does not.

Do you have any VIA devices?  If so, you might try the attached.
(Just for debugging; if the patch helps, I have no idea how to
do it correctly.)

[-- Attachment #2: via-irq --]
[-- Type: text/x-diff, Size: 528 bytes --]

Index: work/drivers/pci/quirks.c
===================================================================
--- work.orig/drivers/pci/quirks.c	2005-06-21 13:43:29.000000000 -0600
+++ work/drivers/pci/quirks.c	2005-06-23 10:40:55.000000000 -0600
@@ -510,7 +510,7 @@
 		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
 	}
 }
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
+DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, quirk_via_irq);
 
 /*
  * PIIX3 USB: We have to disable USB interrupts that are