From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263203AbVFYBJ2 (ORCPT ); Fri, 24 Jun 2005 21:09:28 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263232AbVFYBJ1 (ORCPT ); Fri, 24 Jun 2005 21:09:27 -0400 Received: from smtp.osdl.org ([65.172.181.4]:43406 "EHLO smtp.osdl.org") by vger.kernel.org with ESMTP id S263203AbVFYBJW (ORCPT ); Fri, 24 Jun 2005 21:09:22 -0400 Date: Fri, 24 Jun 2005 18:08:54 -0700 From: Andrew Morton To: sboyce@blueyonder.co.uk Cc: linux-kernel@vger.kernel.org, linux-usb-devel@lists.sourceforge.net Subject: Re: 2.6.12 USB Keypad still not working Message-Id: <20050624180854.542bb10c.akpm@osdl.org> In-Reply-To: <42BC7215.3050507@blueyonder.co.uk> References: <42BC7215.3050507@blueyonder.co.uk> X-Mailer: Sylpheed version 1.0.4 (GTK+ 1.2.10; i386-redhat-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Sid Boyce wrote: > > PhoneSkype USB Phone SK-04. > It gets detected, is registered in /sys/bus/usb as a Keypad. Everything > else USB works including the phone handset. Nothing is detected by > showkey when keys are pressed. > # less /sys/bus/usb/devices/usb3/3-2/3-2:1.3/interface > Keypad > > /dev/usb/hiddev? and /dev/input/keyboard say they are not valid devices > and they are the ones created by the SuSE 9.3 install, not by udev. > > From dmesg > ---------- > usbcore: registered new driver hiddev > drivers/usb/input/hid-core.c: timeout initializing reports > ============================= > input: USB HID v1.10 Keyboard [BeyondTel USB Phone] on usb-0000:00:02.1-2 > usbcore: registered new driver usbhid > drivers/usb/input/hid-core.c: v2.01:USB HID core driver > input: USB HID v1.00 Joystick [CH PRODUCTS CH FLIGHT SIM YOKE USB ] on > usb-0000:00:02.1-1.1 > input: USB HID v1.00 Joystick [CH PRODUCTS CH PRO PEDALS USB ] on > usb-0000:00:02.1-1.4 > I am puzzled by the fact that the keypad is recognised, but I cannot do > anything with it. > > # lsusb > Bus 003 Device 009: ID 04b8:0103 Seiko Epson Corp. Perfection 610 > Bus 003 Device 008: ID 067b:3507 Prolific Technology, Inc. > Bus 003 Device 007: ID 068e:00f2 CH Products, Inc. Flight Sim Pedals > Bus 003 Device 006: ID 05e3:0760 Genesys Logic, Inc. Card Reader > Bus 003 Device 005: ID 03f0:0604 Hewlett-Packard DeskJet 840c > Bus 003 Device 004: ID 068e:00ff CH Products, Inc. Flight Sim Yoke > Bus 003 Device 003: ID 04b4:0303 Cypress Semiconductor Corp. <==== > Bus 003 Device 002: ID 0451:2077 Texas Instruments, Inc. TUSB2077 Hub > Bus 003 Device 001: ID 0000:0000 > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 001: ID 0000:0000 > Was this hardware known to work on ealier kernels? If so, which?