--- linux-2.6.12-git10/drivers/scsi/sym53c8xx_2/sym_glue.c.linas-orig	2005-06-22 15:26:17.000000000 -0500
+++ linux-2.6.12-git10/drivers/scsi/sym53c8xx_2/sym_glue.c	2005-06-22 17:17:00.000000000 -0500
@@ -685,6 +685,10 @@ static irqreturn_t sym53c8xx_intr(int ir
 	struct sym_hcb *np = (struct sym_hcb *)dev_id;
 
 	if (DEBUG_FLAGS & DEBUG_TINY) printf_debug ("[");
+#ifdef CONFIG_SCSI_SYM53C8XX_EEH_RECOVERY
+	if (np->s.io_state != pci_channel_io_normal)
+		return IRQ_HANDLED;
+#endif /* CONFIG_SCSI_SYM53C8XX_EEH_RECOVERY */
 
 	spin_lock_irqsave(np->s.host->host_lock, flags);
 	sym_interrupt(np);
@@ -759,6 +763,27 @@ static void sym_eh_done(struct scsi_cmnd
  */
 static void sym_eh_timeout(u_long p) { __sym_eh_done((struct scsi_cmnd *)p, 1); }
 
+#ifdef CONFIG_SCSI_SYM53C8XX_EEH_RECOVERY
+static void sym_eeh_timeout(u_long p)
+{
+	struct sym_eh_wait *ep = (struct sym_eh_wait *) p;
+	if (!ep)
+		return;
+	complete(&ep->done);
+}
+
+static void sym_eeh_done(struct sym_eh_wait *ep)
+{
+	if (!ep)
+		return;
+	ep->timed_out = 0;
+	if (!del_timer(&ep->timer))
+		return;
+
+	complete(&ep->done);
+}
+#endif /* CONFIG_SCSI_SYM53C8XX_EEH_RECOVERY */
+
 /*
  *  Generic method for our eh processing.
  *  The 'op' argument tells what we have to do.
@@ -799,6 +824,37 @@ prepare:
 
 	/* Try to proceed the operation we have been asked for */
 	sts = -1;
+#ifdef CONFIG_SCSI_SYM53C8XX_EEH_RECOVERY
+
+	/* We may be in an error condition because the PCI bus
+	 * went down. In this case, we need to wait until the
+	 * PCI bus is reset, the card is reset, and only then
+	 * proceed with the scsi error recovery.  We'll wait
+	 * for 15 seconds for this to happen.
+	 */
+#define WAIT_FOR_PCI_RECOVERY	15
+	if (np->s.io_state != pci_channel_io_normal) {
+		struct sym_eh_wait eeh, *eep = &eeh;
+		np->s.io_reset_wait = eep;
+		init_completion(&eep->done);
+		init_timer(&eep->timer);
+		eep->to_do = SYM_EH_DO_WAIT;
+		eep->timer.expires = jiffies + (WAIT_FOR_PCI_RECOVERY*HZ);
+		eep->timer.function = sym_eeh_timeout;
+		eep->timer.data = (u_long)eep;
+		eep->timed_out = 1;	/* Be pessimistic for once :) */
+		add_timer(&eep->timer);
+		spin_unlock_irq(np->s.host->host_lock);
+		wait_for_completion(&eep->done);
+		spin_lock_irq(np->s.host->host_lock);
+		if (eep->timed_out) {
+			printk (KERN_ERR "%s: Timed out waiting for PCI reset\n",
+			       sym_name(np));
+		}
+		np->s.io_reset_wait = NULL;
+	}
+#endif /* CONFIG_SCSI_SYM53C8XX_EEH_RECOVERY */
+
 	switch(op) {
 	case SYM_EH_ABORT:
 		sts = sym_abort_scsiio(np, cmd, 1);
@@ -1584,6 +1640,10 @@ static struct Scsi_Host * __devinit sym_
 	np->maxoffs	= dev->chip.offset_max;
 	np->maxburst	= dev->chip.burst_max;
 	np->myaddr	= dev->host_id;
+#ifdef CONFIG_SCSI_SYM53C8XX_EEH_RECOVERY
+	np->s.io_state = pci_channel_io_normal;
+	np->s.io_reset_wait = NULL;
+#endif /* CONFIG_SCSI_SYM53C8XX_EEH_RECOVERY */
 
 	/*
 	 *  Edit its name.
@@ -1916,6 +1976,59 @@ static int sym_detach(struct sym_hcb *np
 	return 1;
 }
 
+#ifdef CONFIG_SCSI_SYM53C8XX_EEH_RECOVERY
+/** sym2_io_error_detected() is called when PCI error is detected */
+static int sym2_io_error_detected (struct pci_dev *pdev, enum pci_channel_state state)
+{
+	struct sym_hcb *np = pci_get_drvdata(pdev);
+
+	np->s.io_state = state;
+	// XXX If slot is permanently frozen, then what? 
+	// Should we scsi_remove_host() maybe ??
+
+	/* Request a slot slot reset. */
+	return PCIERR_RESULT_NEED_RESET;
+}
+
+/** sym2_io_slot_reset is called when the pci bus has been reset.
+ *  Restart the card from scratch. */
+static int sym2_io_slot_reset (struct pci_dev *pdev)
+{
+	struct sym_hcb *np = pci_get_drvdata(pdev);
+
+	printk (KERN_INFO "%s: recovering from a PCI slot reset\n",
+	    sym_name(np));
+
+	if (pci_enable_device(pdev))
+		printk (KERN_ERR "%s: device setup failed most egregiously\n",
+			    sym_name(np));
+
+	pci_set_master(pdev);
+	enable_irq (pdev->irq);
+
+	/* Perform host reset only on one instance of the card */
+	if (0 == PCI_FUNC (pdev->devfn))
+		sym_reset_scsi_bus(np, 0);
+
+	return PCIERR_RESULT_RECOVERED;
+}
+
+/** sym2_io_resume is called when the error recovery driver
+ *  tells us that its OK to resume normal operation.
+ */
+static void sym2_io_resume (struct pci_dev *pdev)
+{
+	struct sym_hcb *np = pci_get_drvdata(pdev);
+
+	/* Perform device startup only once for this card. */
+	if (0 == PCI_FUNC (pdev->devfn))
+		sym_start_up (np, 1);
+
+	np->s.io_state = pci_channel_io_normal;
+	sym_eeh_done (np->s.io_reset_wait);
+}
+#endif /* CONFIG_SCSI_SYM53C8XX_EEH_RECOVERY */
+
 /*
  * Driver host template.
  */
@@ -2174,6 +2287,13 @@ static struct pci_driver sym2_driver = {
 	.id_table	= sym2_id_table,
 	.probe		= sym2_probe,
 	.remove		= __devexit_p(sym2_remove),
+#ifdef CONFIG_SCSI_SYM53C8XX_EEH_RECOVERY
+	.err_handler = {
+		.error_detected = sym2_io_error_detected,
+		.slot_reset = sym2_io_slot_reset,
+		.resume = sym2_io_resume,
+	},
+#endif /* CONFIG_SCSI_SYM53C8XX_EEH_RECOVERY */
 };
 
 static int __init sym2_init(void)
--- linux-2.6.12-git10/drivers/scsi/sym53c8xx_2/sym_glue.h.linas-orig	2005-06-22 15:26:17.000000000 -0500
+++ linux-2.6.12-git10/drivers/scsi/sym53c8xx_2/sym_glue.h	2005-06-22 15:28:29.000000000 -0500
@@ -181,6 +181,10 @@ struct sym_shcb {
 	char		chip_name[8];
 	struct pci_dev	*device;
 
+	/* pci bus i/o state; waiter for clearing of i/o state */
+	enum pci_channel_state io_state;
+	struct sym_eh_wait *io_reset_wait;
+
 	struct Scsi_Host *host;
 
 	void __iomem *	ioaddr;		/* MMIO kernel io address	*/
--- linux-2.6.12-git10/drivers/scsi/sym53c8xx_2/sym_hipd.c.linas-orig	2005-06-22 15:26:17.000000000 -0500
+++ linux-2.6.12-git10/drivers/scsi/sym53c8xx_2/sym_hipd.c	2005-06-22 15:28:29.000000000 -0500
@@ -2806,6 +2806,7 @@ void sym_interrupt (struct sym_hcb *np)
 	u_char	istat, istatc;
 	u_char	dstat;
 	u_short	sist;
+	u_int    icnt;
 
 	/*
 	 *  interrupt on the fly ?
@@ -2847,6 +2848,7 @@ void sym_interrupt (struct sym_hcb *np)
 	sist	= 0;
 	dstat	= 0;
 	istatc	= istat;
+	icnt = 0;
 	do {
 		if (istatc & SIP)
 			sist  |= INW(np, nc_sist);
@@ -2854,6 +2856,14 @@ void sym_interrupt (struct sym_hcb *np)
 			dstat |= INB(np, nc_dstat);
 		istatc = INB(np, nc_istat);
 		istat |= istatc;
+#ifdef CONFIG_SCSI_SYM53C8XX_EEH_RECOVERY
+		/* Prevent deadlock waiting on a condition that may never clear. */
+		icnt ++;
+		if (100 < icnt) {
+			if (np->s.device->driver->err_handler.error_state != pci_channel_io_normal)
+				return;
+		}
+#endif /* CONFIG_SCSI_SYM53C8XX_EEH_RECOVERY */
 	} while (istatc & (SIP|DIP));
 
 	if (DEBUG_FLAGS & DEBUG_TINY)
--- linux-2.6.12-git10/drivers/scsi/Kconfig.linas-orig	2005-06-22 15:26:14.000000000 -0500
+++ linux-2.6.12-git10/drivers/scsi/Kconfig	2005-06-22 15:28:29.000000000 -0500
@@ -1040,6 +1040,14 @@ config SCSI_SYM53C8XX_IOMAPPED
 	  the card.  This is significantly slower then using memory
 	  mapped IO.  Most people should answer N.
 
+config SCSI_SYM53C8XX_EEH_RECOVERY
+	bool "Enable PCI bus error recovery"
+	depends on SCSI_SYM53C8XX_2 && PPC_PSERIES
+	help
+		If you say Y here, the driver will be able to recover from
+		PCI bus errors on many PowerPC platforms. IBM pSeries users
+		should answer Y.
+
 config SCSI_IPR
 	tristate "IBM Power Linux RAID adapter support"
 	depends on PCI && SCSI
--- linux-2.6.12-git10/arch/ppc64/configs/pSeries_defconfig.linas-orig	2005-06-17 14:48:29.000000000 -0500
+++ linux-2.6.12-git10/arch/ppc64/configs/pSeries_defconfig	2005-06-22 15:30:33.000000000 -0500
@@ -311,6 +311,7 @@ CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MOD
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+CONFIG_SCSI_SYM53C8XX_EEH_RECOVERY=y
 CONFIG_SCSI_IPR=y
 CONFIG_SCSI_IPR_TRACE=y
 CONFIG_SCSI_IPR_DUMP=y