From: Mikael Pettersson <mikpe@csd.uu.se>
To: gregkh@suse.de, ink@jurassic.park.msu.ru, teanropo@cc.jyu.fi
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.13-rc2 hangs at boot
Date: Thu, 7 Jul 2005 15:11:29 +0200 (MEST) [thread overview]
Message-ID: <200507071311.j67DBT71014045@harpo.it.uu.se> (raw)
On Wed, 6 Jul 2005 16:47:28 +0300 (EEST), Tero Roponen wrote:
>my computer (a ThinkPad 380XD laptop) hangs at boot in 2.6.13-rc2.
>When I revert the patch below everything seems to be fine.
Same here: my Targa Visionary 811 Athlon64 laptop
hangs during boot with 2.6.13-rc2, unless I revert
the patch below. -rc1 worked OK.
/Mikael
>thanks,
>Tero Roponen
>
>
>Patch to revert:
>
>Author: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
>Date: Wed, 15 Jun 2005 14:59:27 +0000 (+0400)
>Source: http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=299de0343c7d18448a69c635378342e9214b14af
>
> [PATCH] PCI: pci_assign_unassigned_resources() on x86
>
> - Add sanity check for io[port,mem]_resource in setup-bus.c. These
> resources look like "free" as they have no parents, but obviously
> we must not touch them.
> - In i386.c:pci_allocate_bus_resources(), if a bridge resource cannot be
> allocated for some reason, then clear its flags. This prevents any child
> allocations in this range, so the setup-bus code will work with a clean
> resource sub-tree.
> - i386.c:pcibios_enable_resources() doesn't enable bridges, as it checks
> only resources 0-5, which looks like a clear bug to me. I suspect it
> might break hotplug as well in some cases.
>
> From: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
>
>--- a/arch/i386/pci/common.c
>+++ b/arch/i386/pci/common.c
>@@ -165,6 +165,7 @@ static int __init pcibios_init(void)
> if ((pci_probe & PCI_BIOS_SORT) && !(pci_probe & PCI_NO_SORT))
> pcibios_sort();
> #endif
>+ pci_assign_unassigned_resources();
> return 0;
> }
>
>--- a/arch/i386/pci/i386.c
>+++ b/arch/i386/pci/i386.c
>@@ -106,11 +106,16 @@ static void __init pcibios_allocate_bus_
> if ((dev = bus->self)) {
> for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) {
> r = &dev->resource[idx];
>- if (!r->start)
>+ if (!r->flags)
> continue;
> pr = pci_find_parent_resource(dev, r);
>- if (!pr || request_resource(pr, r) < 0)
>+ if (!r->start || !pr || request_resource(pr, r) < 0) {
> printk(KERN_ERR "PCI: Cannot allocate resource region %d of bridge %s\n", idx, pci_name(dev));
>+ /* Something is wrong with the region.
>+ Invalidate the resource to prevent child
>+ resource allocations in this range. */
>+ r->flags = 0;
>+ }
> }
> }
> pcibios_allocate_bus_resources(&bus->children);
>@@ -227,7 +232,7 @@ int pcibios_enable_resources(struct pci_
>
> pci_read_config_word(dev, PCI_COMMAND, &cmd);
> old_cmd = cmd;
>- for(idx=0; idx<6; idx++) {
>+ for(idx = 0; idx < PCI_NUM_RESOURCES; idx++) {
> /* Only set up the requested stuff */
> if (!(mask & (1<<idx)))
> continue;
>--- a/drivers/pci/setup-bus.c
>+++ b/drivers/pci/setup-bus.c
>@@ -273,6 +273,8 @@ find_free_bus_resource(struct pci_bus *b
>
> for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
> r = bus->resource[i];
>+ if (r == &ioport_resource || r == &iomem_resource)
>+ continue;
> if (r && (r->flags & type_mask) == type && !r->parent)
> return r;
> }
>-
>To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>Please read the FAQ at http://www.tux.org/lkml/
>
next reply other threads:[~2005-07-07 13:12 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-07-07 13:11 Mikael Pettersson [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-07-06 13:47 Tero Roponen
2005-07-07 1:27 ` Jon Smirl
2005-07-07 9:59 ` Ivan Kokshaysky
2005-07-07 10:33 ` Tero Roponen
2005-07-07 12:31 ` Ivan Kokshaysky
2005-07-07 12:47 ` Tero Roponen
2005-07-07 13:41 ` Ivan Kokshaysky
2005-07-07 13:53 ` Tero Roponen
2005-07-07 14:13 ` Tero Roponen
2005-07-08 6:28 ` Ivan Kokshaysky
2005-07-07 13:59 ` Jon Smirl
2005-08-04 20:49 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200507071311.j67DBT71014045@harpo.it.uu.se \
--to=mikpe@csd.uu.se \
--cc=gregkh@suse.de \
--cc=ink@jurassic.park.msu.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=teanropo@cc.jyu.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®