Re: 2.6.13-rc5 - ACPI regression

[Lukas Hejtmanek <xhejtman@mail.muni.cz>]

On Tue, Aug 02, 2005 at 08:59:08PM +0200, Alessandro Suardi wrote:
> On 8/2/05, Lukas Hejtmanek <xhejtman@mail.muni.cz> wrote:
> > Hello,
> > 
> > newly with 2.6.13-rc5 (previous -rc1 was quite ok)
> > 
> > $ time cat /proc/acpi/battery/BAT0/info
> > present:                 yes
> > design capacity:         6000 mAh
> > last full capacity:      6000 mAh
> > battery technology:      rechargeable
> > design voltage:          14800 mV
> > design capacity warning: 600 mAh
> > design capacity low:     300 mAh
> > capacity granularity 1:  60 mAh
> > capacity granularity 2:  60 mAh
> > model number:            M6A
> > serial number:
> > battery type:            LIon
> > OEM info:                ASUSTEK
> > 
> > real    0m32.521s
> > user    0m0.001s
> > sys     0m0.015s
> 
> Different data point, in case this might be useful... 
> 
> Dell Latitude C640, uptodate FC4, kernel built with stock GCC 4.0.1:
> 
> time cat /proc/acpi/battery/BAT0/info
> present:                 yes
> design capacity:         65120 mWh
> last full capacity:      45300 mWh
> battery technology:      rechargeable
> design voltage:          14800 mV
> design capacity warning: 3000 mWh
> design capacity low:     1000 mWh
> capacity granularity 1:  200 mWh
> capacity granularity 2:  200 mWh
> model number:            LIP8120DLP
> serial number:           363
> battery type:            LION
> OEM info:                Sony Corp.

I did not notice before, but my values (capacity and so on) are completely
wrong. It should contain values in mWh instead of mAh.

-- 
Lukáš Hejtmánek