From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S964847AbVHIQON (ORCPT ); Tue, 9 Aug 2005 12:14:13 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S964856AbVHIQON (ORCPT ); Tue, 9 Aug 2005 12:14:13 -0400 Received: from nijmegen.renzel.net ([195.243.213.130]:38064 "EHLO mx1.renzel.net") by vger.kernel.org with ESMTP id S964847AbVHIQOL (ORCPT ); Tue, 9 Aug 2005 12:14:11 -0400 From: Mws To: linux-kernel@vger.kernel.org Subject: linux 2.6.13-rc6 Marvell/Yukon networking problems Date: Tue, 9 Aug 2005 18:14:20 +0200 User-Agent: KMail/1.8.2 MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart1294785.ThaWMUlV6L"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <200508091814.29876.mws@twisted-brains.org> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org --nextPart1294785.ThaWMUlV6L Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline hi there, due to non supporting Marvell Network drivers for the=20 i have to use the syskonnect sk98lin driver from their homepage. even if th= ese drivers are open-source they=20 were rejected by kernel net maintainers until now. there is a skge driver t= hat is integrated into mainline kernel,=20 but that is not able to support this driver. 2.6.13 - rc 1 is fine and working properly. since -rc2 i got problems with having a rejected irq 153.=20 problem still exists with latest rc6 kernel. complete vanilla except for th= e sysconnect drivers. anyone i can provide with infos of the adapters? even testing shouldn't be = a problem at all. regards marcel lspci output=20 0000:02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 Gig= abit Ethernet Controller (rev 15) Subsystem: ASUSTeK Computer Inc. Marvell 88E8053 Gigabit Ethernet C= ontroller (Asus) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-= Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- SERR+ TAbort- SERR+ APIC IRQ transform: 0000:00:1b.0[A] -> IRQ 137 PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 193 PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 161 PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 153 PCI->APIC IRQ transform: 0000:00:1d.3[D] -> IRQ 137 PCI->APIC IRQ transform: 0000:00:1d.7[A] -> IRQ 193 PCI->APIC IRQ transform: 0000:00:1f.1[A] -> IRQ 153 PCI->APIC IRQ transform: 0000:00:1f.2[B] -> IRQ 161 PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 161 PCI->APIC IRQ transform: 0000:05:00.0[A] -> IRQ 137 PCI->APIC IRQ transform: 0000:03:00.0[A] -> IRQ 137 PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 137 PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 169 PCI->APIC IRQ transform: 0000:01:03.0[A] -> IRQ 177 PCI->APIC IRQ transform: 0000:01:04.0[A] -> IRQ 193 PCI->APIC IRQ transform: 0000:01:05.0[A] -> IRQ 185 PCI->APIC IRQ transform: 0000:01:0a.0[A] -> IRQ 177 PCI: Bridge: 0000:00:01.0 IO window: e000-efff MEM window: d7f00000-d7ffffff PREFETCH window: d8000000-dfffffff PCI: Bridge: 0000:00:1c.0 IO window: d000-dfff MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: c000-cfff MEM window: d7e00000-d7efffff PREFETCH window: c0000000-c00fffff PCI: Bridge: 0000:00:1c.2 IO window: b000-bfff MEM window: d7d00000-d7dfffff PREFETCH window: c0100000-c01fffff PCI: Bridge: 0000:00:1e.0 IO window: 9000-afff MEM window: d7c00000-d7cfffff PREFETCH window: c0200000-c02fffff PCI: No IRQ known for interrupt pin A of device 0000:00:01.0. Probably bugg= y MP table. PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: No IRQ known for interrupt pin A of device 0000:00:1c.0. Probably bugg= y MP table. PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: No IRQ known for interrupt pin B of device 0000:00:1c.1. Probably bugg= y MP table. PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: No IRQ known for interrupt pin C of device 0000:00:1c.2. Probably bugg= y MP table. PCI: Setting latency timer of device 0000:00:1c.2 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.14 highmem bounce pool size: 64 pages SGI XFS with large block numbers, no debug enabled Initializing Cryptographic API PCI: No IRQ known for interrupt pin A of device 0000:00:01.0. Probably bugg= y MP table. PCI: Setting latency timer of device 0000:00:01.0 to 64 pcie_portdrv_probe->Dev[2585:8086] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] PCI: No IRQ known for interrupt pin A of device 0000:00:1c.0. Probably bugg= y MP table. PCI: Setting latency timer of device 0000:00:1c.0 to 64 pcie_portdrv_probe->Dev[2660:8086] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] PCI: No IRQ known for interrupt pin B of device 0000:00:1c.1. Probably bugg= y MP table. PCI: Setting latency timer of device 0000:00:1c.1 to 64 pcie_portdrv_probe->Dev[2662:8086] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] PCI: No IRQ known for interrupt pin C of device 0000:00:1c.2. Probably bugg= y MP table. PCI: Setting latency timer of device 0000:00:1c.2 to 64 pcie_portdrv_probe->Dev[2664:8086] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] lp: driver loaded but no devices found Real Time Clock Driver v1.12 hw_random: RNG not detected Linux agpgart interface v0.101 (c) Dave Jones [drm] Initialized drm 1.0.0 20040925 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A parport0: PC-style at 0x378 (0x778) [PCSPP(,...)] parport0: irq 7 detected lp0: using parport0 (polling). io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered =46loppy drive(s): fd0 is 1.44M =46DC 0 is a post-1991 82077 loop: loaded (max 8 devices) pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com sk98lin: Network Device Driver v8.23.1.3 (C)Copyright 1999-2005 Marvell(R). PCI: Setting latency timer of device 0000:03:00.0 to 64 eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter PrefPort:A RlmtMode:Check Link State PCI: Setting latency timer of device 0000:02:00.0 to 64 eth1: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter PrefPort:A RlmtMode:Check Link State Linux video capture interface: v1.00 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx ICH6: IDE controller at PCI slot 0000:00:1f.1 ICH6: chipset revision 3 ICH6: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA Probing IDE interface ide0... hda: ST3160023A, ATA DISK drive hdb: HL-DT-ST DVDRAM GSA-4160B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 IT8212: IDE controller at PCI slot 0000:01:04.0 IT8212: chipset revision 19 it821x: controller in pass through mode. IT8212: 100% native mode on irq 193 ide1: BM-DMA at 0x9800-0x9807, BIOS settings: hdc:pio, hdd:pio ide2: BM-DMA at 0x9808-0x980f, BIOS settings: hde:pio, hdf:pio Probing IDE interface ide1... Probing IDE interface ide2... hde: ST380011A, ATA DISK drive ide2 at 0x9c00-0x9c07,0x9882 on irq 193 Probing IDE interface ide1... hda: max request size: 1024KiB hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=3D19457/255/63, UDM= A(100) hda: cache flushes supported hda: hda1 hda2 hda3 hde: max request size: 1024KiB hde: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=3D16383/255/63, UDMA= (100) hde: cache flushes supported hde: hde1 hde2 hde3 hdb: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 libata version 1.11 loaded. ahci version 1.01 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci(0000:00:1f.2) AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl SATA m= ode ahci(0000:00:1f.2) flags: 64bit ncq pm led slum part ata1: SATA max UDMA/133 cmd 0xF880ED00 ctl 0x0 bmdma 0x0 irq 161 ata2: SATA max UDMA/133 cmd 0xF880ED80 ctl 0x0 bmdma 0x0 irq 161 ata3: SATA max UDMA/133 cmd 0xF880EE00 ctl 0x0 bmdma 0x0 irq 161 ata4: SATA max UDMA/133 cmd 0xF880EE80 ctl 0x0 bmdma 0x0 irq 161 ata1: dev 0 cfg 49:2f00 82:346b 83:7f61 84:4003 85:3469 86:3c41 87:4003 88:= 007f ata1: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi0 : ahci ata2: dev 0 cfg 49:2f00 82:346b 83:7f61 84:4003 85:3469 86:3c41 87:4003 88:= 007f ata2: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48 ata2: dev 0 configured for UDMA/133 scsi1 : ahci ata3: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:= 007f ata3: dev 0 ATA, max UDMA/133, 234441648 sectors: lba48 ata3: dev 0 configured for UDMA/133 scsi2 : ahci ata4: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:= 007f ata4: dev 0 ATA, max UDMA/133, 234441648 sectors: lba48 ata4: dev 0 configured for UDMA/133 scsi3 : ahci Vendor: ATA Model: WDC WD1600JD-98H Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD1600JD-00H Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: ST3120026AS Rev: 3.05 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: ST3120026AS Rev: 3.05 Type: Direct-Access ANSI SCSI revision: 05 sata_sil version 0.9 ata5: SATA max UDMA/100 cmd 0xF8816880 ctl 0xF881688A bmdma 0xF8816800 irq = 185 ata6: SATA max UDMA/100 cmd 0xF88168C0 ctl 0xF88168CA bmdma 0xF8816808 irq = 185 ata7: SATA max UDMA/100 cmd 0xF8816A80 ctl 0xF8816A8A bmdma 0xF8816A00 irq = 185 ata8: SATA max UDMA/100 cmd 0xF8816AC0 ctl 0xF8816ACA bmdma 0xF8816A08 irq = 185 ata5: no device found (phy stat 00000000) scsi4 : sata_sil ata6: no device found (phy stat 00000000) scsi5 : sata_sil ata7: no device found (phy stat 00000000) scsi6 : sata_sil ata8: no device found (phy stat 00000000) scsi7 : sata_sil SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sda: drive cache: write back SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sda: drive cache: write back sda: sda1 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sdb: drive cache: write back sdb: sdb1 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 SCSI device sdc: 234441648 512-byte hdwr sectors (120034 MB) SCSI device sdc: drive cache: write back SCSI device sdc: 234441648 512-byte hdwr sectors (120034 MB) SCSI device sdc: drive cache: write back sdc: sdc1 Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0 SCSI device sdd: 234441648 512-byte hdwr sectors (120034 MB) SCSI device sdd: drive cache: write back SCSI device sdd: 234441648 512-byte hdwr sectors (120034 MB) SCSI device sdd: drive cache: write back sdd: sdd1 sdd2 sdd3 Attached scsi disk sdd at scsi3, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0 Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 0, type 0 Attached scsi generic sg3 at scsi3, channel 0, id 0, lun 0, type 0 ohci1394: $Rev: 1299 $ Ben Collins ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=3D[177] MMIO=3D[d7cff000-d7cf= f7ff] Max Packet=3D[4096] usbmon: debugs is not available PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family= ) USB2 EHCI Controller ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 193, io mem 0xd7bff800 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v2.3 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family= ) USB UHCI #1 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 193, io base 0x00007880 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family= ) USB UHCI #2 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 161, io base 0x00007c00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family= ) USB UHCI #3 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 153, io base 0x00008000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family= ) USB UHCI #4 uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 137, io base 0x00008080 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usb 2-2: new full speed USB device using uhci_hcd and address 2 hub 2-2:1.0: USB hub found hub 2-2:1.0: 4 ports detected usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice input: PC Speaker I2O subsystem v1.288 i2o: max drivers =3D 8 I2O Configuration OSM v1.248 I2O Block Device OSM v1.287 I2O SCSI Peripheral OSM v1.282 I2O ProcFS OSM v1.145 i2c /dev entries driver i2c-sis96x version 1.0.0 input: AT Translated Set 2 keyboard on isa0060/serio0 usb 2-2.1: new full speed USB device using uhci_hcd and address 3 usb 2-2.1: not running at top speed; connect to a high speed hub scsi8 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180000aa3eef] input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 i2c_adapter i2c-0: detect fail: unknown manuf, 0xff pc87360: PC8736x not detected, module not inserted. device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com Advanced Linux Sound Architecture Driver Version 1.0.9b (Thu Jul 28 12:20:1= 3 2005 UTC). PCI: Setting latency timer of device 0000:00:1b.0 to 64 ALSA device list: #0: HDA Intel at 0xd7bf4000 irq 137 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 7, 524288 bytes) TCP established hash table entries: 524288 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost . http://snowman.net/= projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 4 Using IPI Shortcut mode kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. =46reeing unused kernel memory: 216k freed cdrom: open failed. Vendor: Generic Model: STORAGE DEVICE Rev: 0119 Type: Direct-Access ANSI SCSI revision: 00 Attached scsi removable disk sde at scsi8, channel 0, id 0, lun 0 Attached scsi generic sg4 at scsi8, channel 0, id 0, lun 0, type 0 usb-storage: device scan complete Adding 1004052k swap on /dev/hda2. Priority:-1 extents:1 EXT3 FS on hda3, internal journal ReiserFS: hde3: found reiserfs format "3.6" with standard journal ReiserFS: hde3: using ordered data mode ReiserFS: hde3: journal params: device hde3, size 8192, journal first block= 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hde3: checking transaction log (hde3) ReiserFS: hde3: Using r5 hash to sort names XFS mounting filesystem sda1 Ending clean XFS mount for filesystem: sda1 XFS mounting filesystem sdb1 Ending clean XFS mount for filesystem: sdb1 ReiserFS: sdd1: found reiserfs format "3.6" with standard journal ReiserFS: sdd1: using ordered data mode ReiserFS: sdd1: journal params: device sdd1, size 8192, journal first block= 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sdd1: checking transaction log (sdd1) ReiserFS: sdd1: Using r5 hash to sort names XFS mounting filesystem sdd2 Ending clean XFS mount for filesystem: sdd2 XFS mounting filesystem sdd3 Ending clean XFS mount for filesystem: sdd3 irq 153: nobody cared (try booting with the "irqpoll" option) [] __report_bad_irq+0x2a/0x8d [] handle_IRQ_event+0x39/0x6d [] note_interrupt+0x9e/0xf8 [] __do_IRQ+0x13c/0x148 [] do_IRQ+0x19/0x24 [] common_interrupt+0x1a/0x20 [] mwait_idle+0x25/0x4a [] cpu_idle+0x5d/0x6b [] start_kernel+0x157/0x170 [] unknown_bootoption+0x0/0x1e0 handlers: [] (usb_hcd_irq+0x0/0x7a) Disabling IRQ #153 --nextPart1294785.ThaWMUlV6L Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) iD8DBQBC+NZlPpA+SyJsko8RAlK+AKDyMhNrpHXNUlmlQUMXEHisNblrtQCdEfgc nhPwvQQa/ihyqXykeE/n588= =BN0O -----END PGP SIGNATURE----- --nextPart1294785.ThaWMUlV6L--