From: Andrew Morton <akpm@osdl.org>
To: Reuben Farrelly <reuben-lkml@reub.net>
Cc: linux-kernel@vger.kernel.org, David Woodhouse <dwmw2@infradead.org>
Subject: Re: 2.6.13-rc6-mm1
Date: Fri, 19 Aug 2005 18:36:00 -0700 [thread overview]
Message-ID: <20050819183600.49f620b0.akpm@osdl.org> (raw)
In-Reply-To: <430686EA.3000901@reub.net>
Reuben Farrelly <reuben-lkml@reub.net> wrote:
>
> ...
> >> 4. PAM is complaining about "PAM audit_open() failed: Protocol not suppor
> >> ted" and I can't log in as any user including root. I would have picked this
> >> was a userspace problem, but it doesn't break with -rc5-mm1, yet reproduceably
> >> breaks with -rc6-mm1. Weird.
> >
> > hm. How come you're able to use the machine then?
>
> Machine was booting up ok, and things were being written to syslog. Rebooted
> into -rc5-mm1 to investigate, and of course could boot into rc6-mm1 in single
> user mode, test and bring services up one by one from there. Having two boxes
> helped too.
>
> > Is it possible to get an strace of this failure somehow?
>
> Not sure if this is needed anymore, as I found that the problem goes away when
> I compile in kernel auditing. This not required for -rc5-mm1. Is that change
> intended?
>
Sounds wrong to me, especially if 2.6.13-rc6 doesn't do that.
David?
next prev parent reply other threads:[~2005-08-20 1:40 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-19 11:33 2.6.13-rc6-mm1 Andrew Morton
2005-08-19 13:12 ` 2.6.13-rc6-mm1 Brice Goglin
2005-08-19 13:18 ` 2.6.13-rc6-mm1 Brice Goglin
2005-08-19 13:22 ` 2.6.13-rc6-mm1 Brice Goglin
2005-08-19 13:21 ` 2.6.13-rc6-mm1 Reuben Farrelly
2005-08-19 17:34 ` 2.6.13-rc6-mm1 Andrew Morton
2005-08-20 1:27 ` 2.6.13-rc6-mm1 Reuben Farrelly
2005-08-20 1:34 ` 2.6.13-rc6-mm1 Andrew Morton
2005-08-20 1:36 ` Andrew Morton [this message]
2005-08-20 13:40 ` 2.6.13-rc6-mm1 David Woodhouse
2005-08-21 6:25 ` 2.6.13-rc6-mm1 Reuben Farrelly
2005-08-19 13:25 ` 2.6.13-rc6-mm1 Brice Goglin
2005-08-19 13:27 ` 2.6.13-rc6-mm1 Russell King
2005-08-19 13:41 ` 2.6.13-rc6-mm1 Brice Goglin
2005-08-19 13:45 ` 2.6.13-rc6-mm1 Russell King
2005-08-19 14:05 ` 2.6.13-rc6-mm1 Brice Goglin
2005-08-19 15:02 ` 2.6.13-rc6-mm1: drivers/net/s2io.c: compile error with gcc 4.0 Adrian Bunk
2005-08-19 15:20 ` [PATCH] mips: add pcibios_select_root Yoichi Yuasa
2005-08-19 15:45 ` 2.6.13-rc6-mm1 Ed Tomlinson
2005-08-19 16:04 ` 2.6.13-rc6-mm1 Benoit Boissinot
2005-08-19 21:01 ` 2.6.13-rc6-mm1 Ed Tomlinson
2005-08-19 21:24 ` 2.6.13-rc6-mm1 Benoit Boissinot
2005-08-19 16:11 ` 2.6.13-rc6-mm1 Dave Kleikamp
2005-08-19 19:21 ` 2.6.13-rc6-mm1 Andrew Morton
2005-08-19 21:27 ` [RFC] f_maxcount seems to be deprecated ? Eric Dumazet
2005-08-19 21:33 ` Andrew Morton
2005-08-19 22:01 ` [PATCH] Suppress deprecated f_maxcount in 'struct file' Eric Dumazet
2005-08-22 13:08 ` Peter Staubach
2005-08-22 21:57 ` Jesper Juhl
2005-08-19 16:40 ` 2.6.13-rc6-mm1: drivers/scsi/aic7xxx/ compile error Adrian Bunk
2005-08-19 16:42 ` Christoph Hellwig
2005-08-19 16:42 ` 2.6.13-rc6-mm1 Avuton Olrich
2005-08-19 21:10 ` 2.6.13-rc6-mm1 Greg KH
2005-08-19 21:21 ` 2.6.13-rc6-mm1 Avuton Olrich
2005-08-19 17:28 ` 2.6.13-rc6-mm1: too many 'ipv4_table' variables Adrian Bunk
2005-08-19 18:03 ` 2.6.13-rc6-mm1 Jesper Juhl
2005-08-20 1:00 ` [PATCH] fix warning of TANBAC_TB0219 in drivers/char/Kconfig Yoichi Yuasa
2005-08-19 19:22 ` 2.6.13-rc6-mm1 hallyn
2005-08-19 19:51 ` 2.6.13-rc6-mm1 - OOPS in drivers/net/phy Marc Ballarin
2005-08-19 20:34 ` 2.6.13-rc6-mm1: remove-asm-hdregh.patch problems Adrian Bunk
2005-08-19 20:37 ` Andrew Morton
2005-08-19 22:49 ` 2.6.13-rc6-mm1 broke parallel port printer Adrian Bunk
2005-08-19 23:36 ` [-mm patch] drivers/cdrom/sbpcd.c: fix the compilation Adrian Bunk
2005-08-19 23:45 ` Nish Aravamudan
2005-08-20 0:20 ` 2.6.13-rc6-mm1: why is PHYLIB a user-visible option? Adrian Bunk
2005-08-20 0:29 ` Jeff Garzik
2005-08-20 14:49 ` 2.6.13-rc6-mm1 Martin J. Bligh
2005-08-20 15:43 ` 2.6.13-rc6-mm1 [i6300escb.c 2 bugs, little cleanup] Jiri Slaby
2005-08-20 17:36 ` 2.6.13-rc6-mm1: git-ocfs2.patch breaks jffs Adrian Bunk
2005-08-20 19:03 ` [-mm patch] net/core/sysctl_net_core.c: fix PROC_FS=n compile Adrian Bunk
2005-08-21 0:14 ` David S. Miller
2005-08-21 15:08 ` 2.6.13-rc6-mm1 Martin J. Bligh
2005-08-21 16:30 ` 2.6.13-rc6-mm1 Benoit Boissinot
2005-08-21 17:40 ` 2.6.13-rc6-mm1 Jon Smirl
2005-08-21 21:44 ` 2.6.13-rc6-mm1 Benoit Boissinot
2005-08-21 22:11 ` 2.6.13-rc6-mm1 Jon Smirl
2005-08-22 1:36 ` 2.6.13-rc6-mm1 Rogério Brito
[not found] ` <20050822011528.GA12602@ime.usp.br>
2005-08-22 3:48 ` 2.6.13-rc6-mm1 Andrew Morton
2005-08-22 13:30 ` 2.6.13-rc6-mm1 Rogério Brito
[not found] <fa.h617rae.h64dpq@ifi.uio.no>
2005-08-21 6:40 ` 2.6.13-rc6-mm1 Reuben Farrelly
2005-08-21 6:52 ` 2.6.13-rc6-mm1 Andrew Morton
2005-08-22 15:12 ` 2.6.13-rc6-mm1 John McCutchan
2005-08-21 22:22 2.6.13-rc6-mm1 Benoit Boissinot
2005-08-21 22:34 ` 2.6.13-rc6-mm1 Jon Smirl
2005-08-22 14:37 ` 2.6.13-rc6-mm1 Benoit Boissinot
2005-08-22 16:44 ` 2.6.13-rc6-mm1 Jon Smirl
2005-08-22 18:13 ` 2.6.13-rc6-mm1 Benoit Boissinot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050819183600.49f620b0.akpm@osdl.org \
--to=akpm@osdl.org \
--cc=dwmw2@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=reuben-lkml@reub.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®