From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751013AbVHaTom (ORCPT ); Wed, 31 Aug 2005 15:44:42 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751014AbVHaTol (ORCPT ); Wed, 31 Aug 2005 15:44:41 -0400 Received: from smarthost01.eng.net ([213.130.146.173]:60090 "EHLO smarthost01.eng.net") by vger.kernel.org with ESMTP id S1751012AbVHaTok (ORCPT ); Wed, 31 Aug 2005 15:44:40 -0400 From: Chris Clayton To: linux-usb-users@lists.sourceforge.net, linux-kernel@vger.kernel.org Subject: 2.6.13 - strange usb keyboard behaviour Date: Wed, 31 Aug 2005 20:47:56 +0000 User-Agent: KMail/1.8.2 MIME-Version: 1.0 Content-Type: Multipart/Mixed; boundary="Boundary-00=_8dhFD8S3G2SUjrI" Message-Id: <200508312047.56656.chris_clayton@f1internet.com> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org --Boundary-00=_8dhFD8S3G2SUjrI Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Hi, I've built and installed 2.6.13 from unpatched kernel.org sources and my USB keyboard has started to behave very strangely when I boot my system. When I get to the login prompt, I only get to type a few key presses before the characters stop appearing on the screen. If I unplug the keyboard and plug it in again, the keyboard springs back into life and works perfectly until I reboot, when the problem always occurs again. This same keyboard worked fine with 2.6.12.5 and still does. One perhaps important fact is that the keyboard also contains two USB ports. It is labelled Gateway and has a model ID of SK-9926. There are no devices plugged into the ports. I don't have another USB keyboard, so I can't check whether the presence of these ports is material. I've rebuilt both kernels with USB debugging turned on and attach dmesg dumps taken immediately after login. I also attach the output from lsusb -v from each kernel. The dump from 2.6.12.5 ends immediately after a message about my ieee1394 card, but the one from 2.6.13 continues with a USB error message (line 276 of the dump). As far as I can see, this message is coming from hub_irq() of drivers/usb/core/hub.c (line 314), but I have no idea why. I'm more than happy to provide additional diagnostics and try any patches, but please cc me as I'm not subscribed to either list. Thanks Chris --Boundary-00=_8dhFD8S3G2SUjrI Content-Type: text/plain; charset="us-ascii"; name="dmesg-2.6.12.5.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg-2.6.12.5.txt" hardware (bus 00) Boot video device is 0000:01:00.0 PCI: Using IRQ router default [1106/3099] at 0000:00:00.0 apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) Initializing Cryptographic API lp: driver loaded but no devices found Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA KT266/KY266x/KT333 chipset agpgart: AGP aperture is 64M @ 0xe8000000 [drm] Initialized drm 1.0.0 20040925 [drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport0: PC-style at 0x378 [PCSPP,TRISTATE] lp0: using parport0 (polling). io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize 8139too Fast Ethernet driver 0.9.27 eth0: RealTek RTL8139 at 0xe0816000, 00:10:a7:16:aa:36, IRQ 11 eth0: Identified 8139 chip type 'RTL-8100B/8139D' Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 0 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: ExcelStor Technology J360, ATA DISK drive hdb: ExcelStor Technology J360, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: HL-DT-ST RW/DVD GCC-4521B, ATAPI CD/DVD-ROM drive hdd: AOPEN DUW1608/ARR, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 1024KiB hda: 120103200 sectors (61492 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > hdb: max request size: 1024KiB hdb: 120103200 sectors (61492 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100) hdb: cache flushes supported hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 > hdc: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96 ehci_hcd 0000:00:09.2: NEC Corporation USB 2.0 ehci_hcd 0000:00:09.2: reset hcs_params 0x2395 dbg=0 cc=2 pcc=3 ports=5 ehci_hcd 0000:00:09.2: reset portroute 1 0 1 0 0 ehci_hcd 0000:00:09.2: reset hcc_params 0002 thresh 0 uframes 256/512/1024 ehci_hcd 0000:00:09.2: ...powerdown ports... ehci_hcd 0000:00:09.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:09.2: irq 10, io mem 0xee002000 ehci_hcd 0000:00:09.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:09.2: init command 010009 (park)=0 ithresh=1 period=256 RUN ehci_hcd 0000:00:09.2: USB 2.0 initialized, EHCI 0.95, driver 10 Dec 2004 ehci_hcd 0000:00:09.2: supports USB remote wakeup usb usb1: default language 0x0409 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: NEC Corporation USB 2.0 usb usb1: Manufacturer: Linux 2.6.12.5 ehci_hcd usb usb1: SerialNumber: 0000:00:09.2 usb usb1: hotplug usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: hotplug hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: individual port power switching hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: Single TT hub 1-0:1.0: TT requires at most 8 FS bit times hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: enabling power on all ports ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 hub 1-0:1.0: state 5 ports 5 chg 0000 evt 0000 ohci_hcd 0000:00:09.0: NEC Corporation USB ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:09.0: irq 11, io mem 0xee000000 ohci_hcd 0000:00:09.0: resetting from state 'reset', control = 0x0 ohci_hcd 0000:00:09.0: OHCI controller state ohci_hcd 0000:00:09.0: OHCI 1.0, NO legacy support registers ohci_hcd 0000:00:09.0: control 0x083 HCFS=operational CBSR=3 ohci_hcd 0000:00:09.0: cmdstatus 0x00000 SOC=0 ohci_hcd 0000:00:09.0: intrstatus 0x00000004 SF ohci_hcd 0000:00:09.0: intrenable 0x8000001a MIE UE RD WDH ohci_hcd 0000:00:09.0: fminterval a7782edf ohci_hcd 0000:00:09.0: hcca frame #01f7 ohci_hcd 0000:00:09.0: roothub.a ff000203 POTPGT=255 NPS NDP=3 ohci_hcd 0000:00:09.0: roothub.b 00000000 PPCM=0000 DR=0000 ohci_hcd 0000:00:09.0: roothub.status 00008000 DRWE ohci_hcd 0000:00:09.0: roothub.portstatus [0] 0x00000100 PPS ohci_hcd 0000:00:09.0: roothub.portstatus [1] 0x00000100 PPS ohci_hcd 0000:00:09.0: roothub.portstatus [2] 0x00000100 PPS usb usb2: default language 0x0409 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: NEC Corporation USB usb usb2: Manufacturer: Linux 2.6.12.5 ohci_hcd usb usb2: SerialNumber: 0000:00:09.0 usb usb2: hotplug usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: hotplug hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: global over-current protection hub 2-0:1.0: power on to power good time: 510ms hub 2-0:1.0: local power source is good hub 2-0:1.0: no over-current condition exists ohci_hcd 0000:00:09.0: created debug files ohci_hcd 0000:00:09.1: NEC Corporation USB (#2) ohci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:09.1: irq 5, io mem 0xee001000 ohci_hcd 0000:00:09.1: resetting from state 'reset', control = 0x0 hub 2-0:1.0: state 5 ports 3 chg 0000 evt 0000 ohci_hcd 0000:00:09.1: OHCI controller state ohci_hcd 0000:00:09.1: OHCI 1.0, NO legacy support registers ohci_hcd 0000:00:09.1: control 0x083 HCFS=operational CBSR=3 ohci_hcd 0000:00:09.1: cmdstatus 0x00000 SOC=0 ohci_hcd 0000:00:09.1: intrstatus 0x00000004 SF ohci_hcd 0000:00:09.1: intrenable 0x8000001a MIE UE RD WDH ohci_hcd 0000:00:09.1: fminterval a7782edf ohci_hcd 0000:00:09.1: hcca frame #01f8 ohci_hcd 0000:00:09.1: roothub.a ff000202 POTPGT=255 NPS NDP=2 ohci_hcd 0000:00:09.1: roothub.b 00000000 PPCM=0000 DR=0000 ohci_hcd 0000:00:09.1: roothub.status 00008000 DRWE ohci_hcd 0000:00:09.1: roothub.portstatus [0] 0x00000100 PPS ohci_hcd 0000:00:09.1: roothub.portstatus [1] 0x00000100 PPS usb usb3: default language 0x0409 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: NEC Corporation USB (#2) usb usb3: Manufacturer: Linux 2.6.12.5 ohci_hcd usb usb3: SerialNumber: 0000:00:09.1 usb usb3: hotplug usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: hotplug hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: global over-current protection hub 3-0:1.0: power on to power good time: 510ms hub 3-0:1.0: local power source is good hub 3-0:1.0: no over-current condition exists ohci_hcd 0000:00:09.1: created debug files USB Universal Host Controller Interface driver v2.2 uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller hub 3-0:1.0: state 5 ports 2 chg 0000 evt 0000 uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:11.2: irq 10, io base 0x0000dc00 uhci_hcd 0000:00:11.2: detected 2 ports usb usb4: default language 0x0409 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller usb usb4: Manufacturer: Linux 2.6.12.5 uhci_hcd usb usb4: SerialNumber: 0000:00:11.2 usb usb4: hotplug usb usb4: adding 4-0:1.0 (config #1, interface 0) usb 4-0:1.0: hotplug hub 4-0:1.0: usb_probe_interface hub 4-0:1.0: usb_probe_interface - got id hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hub 4-0:1.0: standalone hub hub 4-0:1.0: no power switching (usb 1.0) hub 4-0:1.0: individual port over-current protection hub 4-0:1.0: power on to power good time: 2ms hub 4-0:1.0: local power source is good uhci_hcd 0000:00:11.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) hub 4-0:1.0: state 5 ports 2 chg 0000 evt 0000 uhci_hcd 0000:00:11.2: port 1 portsc 009b,00 hub 4-0:1.0: port 1, status 0101, change 0003, 12 Mb/s uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:11.3: irq 10, io base 0x0000e000 uhci_hcd 0000:00:11.3: detected 2 ports usb usb5: default language 0x0409 usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) usb usb5: Manufacturer: Linux 2.6.12.5 uhci_hcd usb usb5: SerialNumber: 0000:00:11.3 usb usb5: hotplug usb usb5: adding 5-0:1.0 (config #1, interface 0) usb 5-0:1.0: hotplug hub 5-0:1.0: usb_probe_interface hub 5-0:1.0: usb_probe_interface - got id hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected hub 5-0:1.0: standalone hub hub 5-0:1.0: no power switching (usb 1.0) hub 5-0:1.0: individual port over-current protection hub 5-0:1.0: power on to power good time: 2ms hub 5-0:1.0: local power source is good mice: PS/2 mouse device common for all mice Advanced Linux Sound Architecture Driver Version 1.0.9 (Sun May 29 07:31:02 2005 UTC). PCI: Setting latency timer of device 0000:00:11.5 to 64 hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 usb 4-1: new full speed USB device using uhci_hcd and address 2 usb 4-1: ep0 maxpacket = 8 usb 4-1: default language 0x0409 usb 4-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-1: Product: SNAPSCAN usb 4-1: Manufacturer: AGFA usb 4-1: hotplug usb 4-1: adding 4-1:1.0 (config #1, interface 0) usb 4-1:1.0: hotplug uhci_hcd 0000:00:11.2: port 2 portsc 008a,00 hub 4-0:1.0: port 2, status 0100, change 0003, 12 Mb/s input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 hub 5-0:1.0: state 5 ports 2 chg 0000 evt 0006 uhci_hcd 0000:00:11.3: port 1 portsc 009b,00 hub 5-0:1.0: port 1, status 0101, change 0003, 12 Mb/s hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 usb 5-1: new full speed USB device using uhci_hcd and address 2 ALSA device list: #0: VIA 8233A with CMI9738 at 0xe400, irq 5 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 5, 131072 bytes) TCP: Hash tables configured (established 32768 bind 32768) NET: Registered protocol family 1 NET: Registered protocol family 15 usb 5-1: ep0 maxpacket = 8 usb 5-1: default language 0x0409 EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 172k freed kjournald starting. Commit interval 5 seconds usb 5-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1: Product: Gateway Generic USB Hub usb 5-1: Manufacturer: Silitek usb 5-1: hotplug usb 5-1: adding 5-1:1.0 (config #1, interface 0) usb 5-1:1.0: hotplug hub 5-1:1.0: usb_probe_interface hub 5-1:1.0: usb_probe_interface - got id hub 5-1:1.0: USB hub found hub 5-1:1.0: 3 ports detected hub 5-1:1.0: compound device; port removable status: FRR hub 5-1:1.0: individual port power switching hub 5-1:1.0: individual port over-current protection hub 5-1:1.0: power on to power good time: 100ms hub 5-1:1.0: hub controller current requirement: 90mA hub 5-1:1.0: 410mA bus power budget for children hub 5-1:1.0: enabling power on all ports uhci_hcd 0000:00:11.3: port 2 portsc 008a,00 hub 5-0:1.0: port 2, status 0100, change 0003, 12 Mb/s hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 hub 4-0:1.0: state 5 ports 2 chg 0000 evt 0000 hub 5-0:1.0: state 5 ports 2 chg 0000 evt 0000 hub 5-1:1.0: state 5 ports 3 chg 0000 evt 0002 hub 5-1:1.0: port 1, status 0101, change 0001, 12 Mb/s hub 5-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 usb 5-1.1: new full speed USB device using uhci_hcd and address 3 usb 5-1.1: ep0 maxpacket = 8 usb 5-1.1: skipped 1 descriptor after interface usb 5-1.1: default language 0x0409 usb 5-1.1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1.1: Product: Gateway Generic USB Hub usb 5-1.1: Manufacturer: Silitek usb 5-1.1: hotplug usb 5-1.1: adding 5-1.1:1.0 (config #1, interface 0) usb 5-1.1:1.0: hotplug hub 5-1:1.0: 410mA power budget left EXT3 FS on hda6, internal journal EXT3-fs warning: maximal mount count reached, running e2fsck is recommended kjournald starting. Commit interval 5 seconds EXT3 FS on hdb6, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1052248k swap on /dev/hdb3. Priority:-1 extents:1 usbhid 5-1.1:1.0: usb_probe_interface usbhid 5-1.1:1.0: usb_probe_interface - got id input: USB HID v1.10 Keyboard [Silitek Gateway Generic USB Hub] on usb-0000:00:11.3-1.1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver ip_tables: (C) 2000-2002 Netfilter core team eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 ip_conntrack version 2.1 (4095 buckets, 32760 max) - 212 bytes per conntrack ohci1394: $Rev: 1250 $ Ben Collins ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[ee003000-ee0037ff] Max Packet=[2048] Linux video capture interface: v1.00 bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 0000:00:0b.0, irq: 10, latency: 32, mmio: 0xee004000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00fffbdf [init] bttv0: i2c: checking for MSP34xx @ 0x80... found bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes bttv0: using tuner=33 bttv0: i2c: checking for MSP34xx @ 0x80... found msp34xx: init: chip=MSP3410G-B11 +nicam +simple +simpler +radio mode=simpler msp34xxg: daemon started bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tda9885/6/7: chip found @ 0x86 tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw]) tuner 0-0060: microtune: companycode=4d54 part=04 rev=04 tuner 0-0060: microtune MT2032 found, OK bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 .. ok ieee1394: Host added: ID:BUS[0-00:1023] GUID[00110666000013cc] --Boundary-00=_8dhFD8S3G2SUjrI Content-Type: text/plain; charset="us-ascii"; name="dmesg-2.6.13.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg-2.6.13.txt" 00:00:09.2: ...powerdown ports... ehci_hcd 0000:00:09.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:09.2: irq 10, io mem 0xee002000 ehci_hcd 0000:00:09.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:09.2: init command 010009 (park)=0 ithresh=1 period=256 RUN ehci_hcd 0000:00:09.2: USB 2.0 initialized, EHCI 0.95, driver 10 Dec 2004 ehci_hcd 0000:00:09.2: supports USB remote wakeup usb usb1: default language 0x0409 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: NEC Corporation USB 2.0 usb usb1: Manufacturer: Linux 2.6.13 ehci_hcd usb usb1: SerialNumber: 0000:00:09.2 usb usb1: hotplug usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: hotplug hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: individual port power switching hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: Single TT hub 1-0:1.0: TT requires at most 8 FS bit times hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: enabling power on all ports hub 1-0:1.0: state 5 ports 5 chg 0000 evt 0000 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 ohci_hcd 0000:00:09.0: NEC Corporation USB ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:09.0: irq 11, io mem 0xee000000 ohci_hcd 0000:00:09.0: resetting from state 'reset', control = 0x0 ohci_hcd 0000:00:09.0: OHCI controller state ohci_hcd 0000:00:09.0: OHCI 1.0, NO legacy support registers ohci_hcd 0000:00:09.0: control 0x083 HCFS=operational CBSR=3 ohci_hcd 0000:00:09.0: cmdstatus 0x00000 SOC=0 ohci_hcd 0000:00:09.0: intrstatus 0x00000004 SF ohci_hcd 0000:00:09.0: intrenable 0x8000001a MIE UE RD WDH ohci_hcd 0000:00:09.0: fminterval a7782edf ohci_hcd 0000:00:09.0: hcca frame #01ff ohci_hcd 0000:00:09.0: roothub.a ff000203 POTPGT=255 NPS NDP=3 ohci_hcd 0000:00:09.0: roothub.b 00000000 PPCM=0000 DR=0000 ohci_hcd 0000:00:09.0: roothub.status 00008000 DRWE ohci_hcd 0000:00:09.0: roothub.portstatus [0] 0x00000100 PPS ohci_hcd 0000:00:09.0: roothub.portstatus [1] 0x00000100 PPS ohci_hcd 0000:00:09.0: roothub.portstatus [2] 0x00000100 PPS ohci_hcd 0000:00:09.0: created debug files usb usb2: default language 0x0409 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: NEC Corporation USB usb usb2: Manufacturer: Linux 2.6.13 ohci_hcd usb usb2: SerialNumber: 0000:00:09.0 usb usb2: hotplug usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: hotplug hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: global over-current protection hub 2-0:1.0: power on to power good time: 510ms hub 2-0:1.0: local power source is good hub 2-0:1.0: no over-current condition exists hub 2-0:1.0: state 5 ports 3 chg 0000 evt 0000 ohci_hcd 0000:00:09.1: NEC Corporation USB (#2) ohci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:09.1: irq 5, io mem 0xee001000 ohci_hcd 0000:00:09.1: resetting from state 'reset', control = 0x0 ohci_hcd 0000:00:09.1: OHCI controller state ohci_hcd 0000:00:09.1: OHCI 1.0, NO legacy support registers ohci_hcd 0000:00:09.1: control 0x083 HCFS=operational CBSR=3 ohci_hcd 0000:00:09.1: cmdstatus 0x00000 SOC=0 ohci_hcd 0000:00:09.1: intrstatus 0x00000004 SF ohci_hcd 0000:00:09.1: intrenable 0x8000001a MIE UE RD WDH ohci_hcd 0000:00:09.1: fminterval a7782edf ohci_hcd 0000:00:09.1: hcca frame #01ff ohci_hcd 0000:00:09.1: roothub.a ff000202 POTPGT=255 NPS NDP=2 ohci_hcd 0000:00:09.1: roothub.b 00000000 PPCM=0000 DR=0000 ohci_hcd 0000:00:09.1: roothub.status 00008000 DRWE ohci_hcd 0000:00:09.1: roothub.portstatus [0] 0x00000100 PPS ohci_hcd 0000:00:09.1: roothub.portstatus [1] 0x00000100 PPS ohci_hcd 0000:00:09.1: created debug files usb usb3: default language 0x0409 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: NEC Corporation USB (#2) usb usb3: Manufacturer: Linux 2.6.13 ohci_hcd usb usb3: SerialNumber: 0000:00:09.1 usb usb3: hotplug usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: hotplug hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: global over-current protection hub 3-0:1.0: power on to power good time: 510ms hub 3-0:1.0: local power source is good hub 3-0:1.0: no over-current condition exists hub 3-0:1.0: state 5 ports 2 chg 0000 evt 0000 USB Universal Host Controller Interface driver v2.3 uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:00:11.2: detected 2 ports uhci_hcd 0000:00:11.2: check_and_reset_hc: legsup = 0x0010 uhci_hcd 0000:00:11.2: Performing full reset uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:11.2: irq 10, io base 0x0000dc00 uhci_hcd 0000:00:11.2: supports USB remote wakeup usb usb4: default language 0x0409 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller usb usb4: Manufacturer: Linux 2.6.13 uhci_hcd usb usb4: SerialNumber: 0000:00:11.2 usb usb4: hotplug usb usb4: adding 4-0:1.0 (config #1, interface 0) usb 4-0:1.0: hotplug hub 4-0:1.0: usb_probe_interface hub 4-0:1.0: usb_probe_interface - got id hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hub 4-0:1.0: standalone hub hub 4-0:1.0: no power switching (usb 1.0) hub 4-0:1.0: individual port over-current protection hub 4-0:1.0: power on to power good time: 2ms hub 4-0:1.0: local power source is good hub 4-0:1.0: state 5 ports 2 chg 0000 evt 0000 uhci_hcd 0000:00:11.2: port 1 portsc 009b,00 hub 4-0:1.0: port 1, status 0101, change 0003, 12 Mb/s uhci_hcd 0000:00:11.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) uhci_hcd 0000:00:11.3: detected 2 ports uhci_hcd 0000:00:11.3: check_and_reset_hc: legsup = 0x0010 uhci_hcd 0000:00:11.3: Performing full reset uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:11.3: irq 10, io base 0x0000e000 uhci_hcd 0000:00:11.3: supports USB remote wakeup usb usb5: default language 0x0409 usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) usb usb5: Manufacturer: Linux 2.6.13 uhci_hcd usb usb5: SerialNumber: 0000:00:11.3 usb usb5: hotplug usb usb5: adding 5-0:1.0 (config #1, interface 0) usb 5-0:1.0: hotplug hub 5-0:1.0: usb_probe_interface hub 5-0:1.0: usb_probe_interface - got id hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected hub 5-0:1.0: standalone hub hub 5-0:1.0: no power switching (usb 1.0) hub 5-0:1.0: individual port over-current protection hub 5-0:1.0: power on to power good time: 2ms hub 5-0:1.0: local power source is good mice: PS/2 mouse device common for all mice Advanced Linux Sound Architecture Driver Version 1.0.9b (Thu Jul 28 12:20:13 2005 UTC). PCI: Setting latency timer of device 0000:00:11.5 to 64 hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 usb 4-1: new full speed USB device using uhci_hcd and address 2 input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 usb 4-1: ep0 maxpacket = 8 usb 4-1: default language 0x0409 usb 4-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-1: Product: SNAPSCAN usb 4-1: Manufacturer: AGFA usb 4-1: hotplug usb 4-1: adding 4-1:1.0 (config #1, interface 0) usb 4-1:1.0: hotplug uhci_hcd 0000:00:11.2: port 2 portsc 008a,00 hub 4-0:1.0: port 2, status 0100, change 0003, 12 Mb/s hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 hub 4-0:1.0: state 5 ports 2 chg 0000 evt 0000 hub 5-0:1.0: state 5 ports 2 chg 0000 evt 0006 uhci_hcd 0000:00:11.3: port 1 portsc 009b,00 hub 5-0:1.0: port 1, status 0101, change 0003, 12 Mb/s hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 ALSA device list: #0: VIA 8233A with CMI9738 at 0xe400, irq 5 NET: Registered protocol family 2 usb 5-1: new full speed USB device using uhci_hcd and address 2 IP route cache hash table entries: 8192 (order: 3, 32768 bytes) TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 5, 131072 bytes) TCP: Hash tables configured (established 32768 bind 32768) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 15 Using IPI Shortcut mode EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 164k freed kjournald starting. Commit interval 5 seconds usb 5-1: ep0 maxpacket = 8 usb 5-1: default language 0x0409 usb 5-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1: Product: Gateway Generic USB Hub usb 5-1: Manufacturer: Silitek usb 5-1: hotplug usb 5-1: adding 5-1:1.0 (config #1, interface 0) usb 5-1:1.0: hotplug hub 5-1:1.0: usb_probe_interface hub 5-1:1.0: usb_probe_interface - got id hub 5-1:1.0: USB hub found hub 5-1:1.0: 3 ports detected hub 5-1:1.0: compound device; port removable status: FRR hub 5-1:1.0: individual port power switching hub 5-1:1.0: individual port over-current protection hub 5-1:1.0: power on to power good time: 100ms hub 5-1:1.0: hub controller current requirement: 90mA hub 5-1:1.0: 410mA bus power budget for children hub 5-1:1.0: enabling power on all ports uhci_hcd 0000:00:11.3: port 2 portsc 008a,00 hub 5-0:1.0: port 2, status 0100, change 0003, 12 Mb/s hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 hub 5-0:1.0: state 5 ports 2 chg 0000 evt 0000 hub 5-1:1.0: state 5 ports 3 chg 0000 evt 0002 hub 5-1:1.0: port 1, status 0101, change 0001, 12 Mb/s hub 5-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 usb 5-1.1: new full speed USB device using uhci_hcd and address 3 usb 5-1.1: ep0 maxpacket = 8 usb 5-1.1: skipped 1 descriptor after interface usb 5-1.1: default language 0x0409 usb 5-1.1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1.1: Product: Gateway Generic USB Hub usb 5-1.1: Manufacturer: Silitek usb 5-1.1: hotplug usb 5-1.1: adding 5-1.1:1.0 (config #1, interface 0) usb 5-1.1:1.0: hotplug hub 5-1:1.0: 410mA power budget left EXT3 FS on hda6, internal journal EXT3-fs warning: maximal mount count reached, running e2fsck is recommended kjournald starting. Commit interval 5 seconds EXT3 FS on hdb6, internal journal EXT3-fs: mounted filesystem with ordered data mode. usbhid 5-1.1:1.0: usb_probe_interface usbhid 5-1.1:1.0: usb_probe_interface - got id input: USB HID v1.10 Keyboard [Silitek Gateway Generic USB Hub] on usb-0000:00:11.3-1.1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver Adding 1052248k swap on /dev/hdb3. Priority:-1 extents:1 ip_tables: (C) 2000-2002 Netfilter core team eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 ip_conntrack version 2.1 (4095 buckets, 32760 max) - 212 bytes per conntrack ohci1394: $Rev: 1299 $ Ben Collins ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5] MMIO=[ee003000-ee0037ff] Max Packet=[2048] Linux video capture interface: v1.00 bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 0000:00:0b.0, irq: 10, latency: 32, mmio: 0xee004000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00fffbdf [init] bttv0: i2c: checking for MSP34xx @ 0x80... found bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes bttv0: using tuner=33 bttv0: i2c: checking for MSP34xx @ 0x80... found msp34xx: init: chip=MSP3410G-B11 +nicam +simple +simpler +radio mode=simpler msp34xxg: daemon started bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tda9885/6/7: chip found @ 0x86 : chip found @ 0xc0 (bt878 #0 [sw]) : Returned more than 5 bytes. It is not a TEA5767 tuner 0-0060: microtune: companycode=4d54 part=04 rev=04 tuner 0-0060: microtune MT2032 found, OK bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 .. ok ieee1394: Host added: ID:BUS[0-00:1023] GUID[00110666000013cc] hub 5-1:1.0: transfer --> -75 hub 5-0:1.0: state 5 ports 2 chg 0000 evt 0002 uhci_hcd 0000:00:11.3: port 1 portsc 008a,00 hub 5-0:1.0: port 1, status 0100, change 0003, 12 Mb/s usb 5-1: USB disconnect, address 2 usb 5-1.1: USB disconnect, address 3 usb 5-1.1: usb_disable_device nuking all URBs usb 5-1.1: unregistering interface 5-1.1:1.0 usb 5-1.1:1.0: hotplug usb 5-1.1: unregistering device usb 5-1.1: hotplug usb 5-1: usb_disable_device nuking all URBs uhci_hcd 0000:00:11.3: shutdown urb dfc2a560 pipe 40408280 ep1in-intr usb 5-1: unregistering interface 5-1:1.0 usb 5-1:1.0: hotplug usb 5-1: unregistering device usb 5-1: hotplug hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 uhci_hcd 0000:00:11.3: suspend_rh (auto-stop) uhci_hcd 0000:00:11.3: wakeup_rh (auto-start) hub 5-0:1.0: state 5 ports 2 chg 0000 evt 0002 uhci_hcd 0000:00:11.3: port 1 portsc 0093,00 hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 usb 5-1: new full speed USB device using uhci_hcd and address 4 usb 5-1: ep0 maxpacket = 8 usb 5-1: default language 0x0409 usb 5-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1: Product: Gateway Generic USB Hub usb 5-1: Manufacturer: Silitek usb 5-1: hotplug usb 5-1: adding 5-1:1.0 (config #1, interface 0) usb 5-1:1.0: hotplug hub 5-1:1.0: usb_probe_interface hub 5-1:1.0: usb_probe_interface - got id hub 5-1:1.0: USB hub found hub 5-1:1.0: 3 ports detected hub 5-1:1.0: compound device; port removable status: FRR hub 5-1:1.0: individual port power switching hub 5-1:1.0: individual port over-current protection hub 5-1:1.0: power on to power good time: 100ms hub 5-1:1.0: hub controller current requirement: 90mA hub 5-1:1.0: 410mA bus power budget for children hub 5-1:1.0: enabling power on all ports hub 5-1:1.0: state 5 ports 3 chg 0000 evt 0000 hub 5-1:1.0: port 1, status 0101, change 0001, 12 Mb/s hub 5-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 usb 5-1.1: new full speed USB device using uhci_hcd and address 5 usb 5-1.1: ep0 maxpacket = 8 usb 5-1.1: skipped 1 descriptor after interface usb 5-1.1: default language 0x0409 usb 5-1.1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1.1: Product: Gateway Generic USB Hub usb 5-1.1: Manufacturer: Silitek usb 5-1.1: hotplug usb 5-1.1: adding 5-1.1:1.0 (config #1, interface 0) usb 5-1.1:1.0: hotplug usbhid 5-1.1:1.0: usb_probe_interface usbhid 5-1.1:1.0: usb_probe_interface - got id input: USB HID v1.10 Keyboard [Silitek Gateway Generic USB Hub] on usb-0000:00:11.3-1.1 hub 5-1:1.0: 410mA power budget left --Boundary-00=_8dhFD8S3G2SUjrI Content-Type: text/plain; charset="us-ascii"; name="lsusb-v-2.6.12.5.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="lsusb-v-2.6.12.5.txt" Bus 005 Device 003: ID 0443:001c Gateway, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0443 Gateway, Inc. idProduct 0x001c bcdDevice 1.00 iManufacturer 1 Silitek iProduct 2 Gateway Generic USB Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 2 Gateway Generic USB Hub bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Devices bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 2 Gateway Generic USB Hub HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 65 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 24 Bus 005 Device 002: ID 0443:001d Gateway, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0443 Gateway, Inc. idProduct 0x001d bcdDevice 1.00 iManufacturer 1 Silitek iProduct 2 Gateway Generic USB Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 2 Gateway Generic USB Hub bmAttributes 0xa0 Remote Wakeup MaxPower 90mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 2 Gateway Generic USB Hub Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 3 wHubCharacteristic 0x000d Per-port power switching Compound device Per-port overcurrent protection bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 90 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0x00 Hub Port Status: Port 1: 0000.0103 power enable connect Port 2: 0000.0100 power Port 3: 0000.0100 power Bus 005 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.12.5 uhci_hcd iProduct 2 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) iSerial 1 0000:00:11.3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0x00 Hub Port Status: Port 1: 0000.0103 power enable connect Port 2: 0000.0100 power Bus 004 Device 002: ID 06bd:2061 AGFA-Gevaert NV SnapScan 1212U (?) Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 8 idVendor 0x06bd AGFA-Gevaert NV idProduct 0x2061 SnapScan 1212U (?) bcdDevice 1.00 iManufacturer 1 AGFA iProduct 2 SNAPSCAN iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x40 Self Powered MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 16 Bus 004 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.12.5 uhci_hcd iProduct 2 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller iSerial 1 0000:00:11.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0x00 Hub Port Status: Port 1: 0000.0103 power enable connect Port 2: 0000.0100 power Bus 003 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.12.5 ohci_hcd iProduct 2 NEC Corporation USB (#2) iSerial 1 0000:00:09.1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 255 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0x00 Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Bus 002 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.12.5 ohci_hcd iProduct 2 NEC Corporation USB iSerial 1 0000:00:09.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 3 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 255 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0x00 Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Bus 001 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 8 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.12.5 ehci_hcd iProduct 2 NEC Corporation USB 2.0 iSerial 1 0000:00:09.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 5 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0x00 Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power --Boundary-00=_8dhFD8S3G2SUjrI Content-Type: text/plain; charset="us-ascii"; name="lsusb-v-2.6.13.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="lsusb-v-2.6.13.txt" Bus 005 Device 005: ID 0443:001c Gateway, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0443 Gateway, Inc. idProduct 0x001c bcdDevice 1.00 iManufacturer 1 Silitek iProduct 2 Gateway Generic USB Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 2 Gateway Generic USB Hub bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Devices bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 2 Gateway Generic USB Hub HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 65 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 24 Bus 005 Device 004: ID 0443:001d Gateway, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0443 Gateway, Inc. idProduct 0x001d bcdDevice 1.00 iManufacturer 1 Silitek iProduct 2 Gateway Generic USB Hub iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 2 Gateway Generic USB Hub bmAttributes 0xa0 Remote Wakeup MaxPower 90mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 2 Gateway Generic USB Hub Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0001 1x 1 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 3 wHubCharacteristic 0x000d Per-port power switching Compound device Per-port overcurrent protection bPwrOn2PwrGood 50 * 2 milli seconds bHubContrCurrent 90 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0x00 Hub Port Status: Port 1: 0000.0103 power enable connect Port 2: 0000.0100 power Port 3: 0000.0100 power Bus 005 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.13 uhci_hcd iProduct 2 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) iSerial 1 0000:00:11.3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0x00 Hub Port Status: Port 1: 0000.0103 power enable connect Port 2: 0000.0100 power Bus 004 Device 002: ID 06bd:2061 AGFA-Gevaert NV SnapScan 1212U (?) Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 8 idVendor 0x06bd AGFA-Gevaert NV idProduct 0x2061 SnapScan 1212U (?) bcdDevice 1.00 iManufacturer 1 AGFA iProduct 2 SNAPSCAN iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x40 Self Powered MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 16 Bus 004 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.13 uhci_hcd iProduct 2 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller iSerial 1 0000:00:11.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0x00 Hub Port Status: Port 1: 0000.0103 power enable connect Port 2: 0000.0100 power Bus 003 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.13 ohci_hcd iProduct 2 NEC Corporation USB (#2) iSerial 1 0000:00:09.1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 255 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0x00 Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Bus 002 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.13 ohci_hcd iProduct 2 NEC Corporation USB iSerial 1 0000:00:09.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 3 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 255 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0x00 Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Bus 001 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 8 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.13 ehci_hcd iProduct 2 NEC Corporation USB 2.0 iSerial 1 0000:00:09.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 5 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0x00 Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power --Boundary-00=_8dhFD8S3G2SUjrI--