mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
To: Ilia Mirkin <imirkin@MIT.EDU>
Cc: Greg KH <greg@kroah.com>, linux-kernel@vger.kernel.org
Subject: Re: pci detection on alpha fails to assign irq to on-board usb device
Date: Fri, 16 Sep 2005 15:09:02 +0400	[thread overview]
Message-ID: <20050916150902.A4004@jurassic.park.msu.ru> (raw)
In-Reply-To: <1126844006.10966.68.camel@INFERNAL.mit.edu>; from imirkin@MIT.EDU on Fri, Sep 16, 2005 at 12:13:25AM -0400

On Fri, Sep 16, 2005 at 12:13:25AM -0400, Ilia Mirkin wrote:
> Tried with 2.6.13.1 -- same thing. If you think that there are relevant
> patches that went into -rc1 that are not in .1, I could try that out
> too. A cursory look does not suggest any though.

USB has never worked on these machines with stock kernels.
Please try appended patch (also make sure that "usb_enable" is "on"
in SRM.

Ivan.

--- linux/arch/alpha/kernel/sys_dp264.c.orig	Fri Sep 16 14:41:22 2005
+++ linux/arch/alpha/kernel/sys_dp264.c	Fri Sep 16 14:48:13 2005
@@ -395,6 +395,22 @@ clipper_init_irq(void)
  */
 
 static int __init
+isa_irq_fixup(struct pci_dev *dev, int irq)
+{
+	u8 irq8;
+
+	if (irq > 0)
+		return irq;
+
+	/* This interrupt is routed via ISA bridge, so we'll
+	   just have to trust whatever value the console might
+	   have assigned.  */
+	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq8);
+
+	return irq8 & 0xf;
+}
+
+static int __init
 dp264_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	static char irq_tab[6][5] __initdata = {
@@ -407,25 +423,13 @@ dp264_map_irq(struct pci_dev *dev, u8 sl
 		{ 16+ 3, 16+ 3, 16+ 2, 16+ 1, 16+ 0}  /* IdSel 10 slot 3 */
 	};
 	const long min_idsel = 5, max_idsel = 10, irqs_per_slot = 5;
-
 	struct pci_controller *hose = dev->sysdata;
 	int irq = COMMON_TABLE_LOOKUP;
 
-	if (irq > 0) {
+	if (irq > 0)
 		irq += 16 * hose->index;
-	} else {
-		/* ??? The Contaq IDE controller on the ISA bridge uses
-		   "legacy" interrupts 14 and 15.  I don't know if anything
-		   can wind up at the same slot+pin on hose1, so we'll
-		   just have to trust whatever value the console might
-		   have assigned.  */
-
-		u8 irq8;
-		pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq8);
-		irq = irq8;
-	}
 
-	return irq;
+	return isa_irq_fixup(dev, irq);
 }
 
 static int __init
@@ -453,7 +457,8 @@ monet_map_irq(struct pci_dev *dev, u8 sl
 		{    24,    24,    25,    26,    27}  /* IdSel 15 slot 5 PCI2*/
 	};
 	const long min_idsel = 3, max_idsel = 15, irqs_per_slot = 5;
-	return COMMON_TABLE_LOOKUP;
+
+	return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP);
 }
 
 static u8 __init
@@ -507,7 +512,8 @@ webbrick_map_irq(struct pci_dev *dev, u8
 		{    47,    47,    46,    45,    44}, /* IdSel 17 slot 3 */
 	};
 	const long min_idsel = 7, max_idsel = 17, irqs_per_slot = 5;
-	return COMMON_TABLE_LOOKUP;
+
+	return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP);
 }
 
 static int __init
@@ -524,14 +530,13 @@ clipper_map_irq(struct pci_dev *dev, u8 
 		{    -1,    -1,    -1,    -1,    -1}  /* IdSel 7 ISA Bridge */
 	};
 	const long min_idsel = 1, max_idsel = 7, irqs_per_slot = 5;
-
 	struct pci_controller *hose = dev->sysdata;
 	int irq = COMMON_TABLE_LOOKUP;
 
 	if (irq > 0)
 		irq += 16 * hose->index;
 
-	return irq;
+	return isa_irq_fixup(dev, irq);
 }
 
 static void __init

  reply	other threads:[~2005-09-16 11:09 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-09-16  0:20 Ilia Mirkin
2005-09-16  2:54 ` Greg KH
2005-09-16  4:13   ` Ilia Mirkin
2005-09-16 11:09     ` Ivan Kokshaysky [this message]
2005-09-16 15:45       ` Ilia Mirkin
2005-09-16  5:11   ` Ilia Mirkin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20050916150902.A4004@jurassic.park.msu.ru \
    --to=ink@jurassic.park.msu.ru \
    --cc=greg@kroah.com \
    --cc=imirkin@MIT.EDU \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®