From: Blaisorblade <blaisorblade@yahoo.it>
To: Andrew Morton <akpm@osdl.org>, LKML <linux-kernel@vger.kernel.org>
Subject: Fwd: Re: CPUFreq_ondemand: misnamed ignore_nice attribute
Date: Tue, 27 Sep 2005 18:51:00 +0200 [thread overview]
Message-ID: <200509271851.00914.blaisorblade@yahoo.it> (raw)
[-- Attachment #1: Type: text/plain, Size: 1781 bytes --]
This is the original docco patch for cpufreq_ondemand. Note that it doesn't
document the existing behaviour (yes, it's confusing enough even for the
author), it documents the future behaviour. ignore_nice should be renamed in
this doc like in sysfs, i.e. to ignore_nice_load (or ignore_nice_tasks, but I
prefer the 1st choice).
---------- Forwarded Message ----------
Subject: Re: CPUFreq_ondemand: misnamed ignore_nice attribute
Date: Friday 02 September 2005 21:14
From: Alexander Clouter <alex@digriz.org.uk>
To: Blaisorblade <blaisorblade@yahoo.it>
Cc: Dave Jones <davej@redhat.com>
Blaisorblade <blaisorblade@yahoo.it> [20050823 21:08:25 +0200]:
> The "ignore_nice" attribute has indeed a strange (reversed) effect: cpu
> time spent while executing nice tasks is ignored if it is clear, rather
> than if it is set.
Hopefully the patch attached clears everything up? :) Its a rare patch for
the Linux kernel, and it pained me to write something...so...hidious....so
wrong....so non-coder like :)
It should apply with no problems to a 2.6.13 kernel. A suitable fix? :)
Cheers
Alex
> I see in the code the current logic makes sense, because setting this
> attribute makes "nice" time be ignored while calculating idle time. But I
> feel that this naming is confusing.
--
_______________________________
/ No good deed goes unpunished. \
\ -- Clare Booth Luce /
-------------------------------
\ ^__^
\ (oo)\_______
(__)\ )\/\
||----w |
-------------------------------------------------------
--
Inform me of my mistakes, so I can keep imitating Homer Simpson's "Doh!".
Paolo Giarrusso, aka Blaisorblade (Skype ID "PaoloGiarrusso", ICQ 215621894)
http://www.user-mode-linux.org/~blaisorblade
[-- Attachment #2: cpufreq-doc.patch --]
[-- Type: text/plain, Size: 3656 bytes --]
--- linux-2.6.13.orig/Documentation/cpu-freq/governors.txt 2005-08-29 08:21:27.195275192 +0100
+++ linux-2.6.13/Documentation/cpu-freq/governors.txt 2005-09-02 15:19:44.599267264 +0100
@@ -27,6 +27,7 @@
2.2 Powersave
2.3 Userspace
2.4 Ondemand
+2.5 Conservative
3. The Governor Interface in the CPUfreq Core
@@ -110,9 +111,64 @@
The CPUfreq govenor "ondemand" sets the CPU depending on the
current usage. To do this the CPU must have the capability to
-switch the frequency very fast.
-
+switch the frequency very quickly. There are a number of sysfs file
+accessible parameters:
+sampling_rate: measured in uS (10^-6 seconds), this is how often you
+want the kernel to look at the CPU usage and to make decisions on
+what to do about the frequency. Typically this is set to values of
+around '10000' or more.
+
+show_sampling_rate_(min|max): the minimum and maximum sampling rates
+available that you may set 'sampling_rate' to.
+
+up_threshold: defines what the average CPU usaged between the samplings
+of 'sampling_rate' needs to be for the kernel to make a decision on
+whether it should increase the frequency. For example when it is set
+to its default value of '80' it means that between the checking
+intervals the CPU needs to be on average more than 80% in use to then
+decide that the CPU speed needs to be increased.
+
+sampling_down_factor: this parameter controls the rate that th CPU
+makes a decision on when to decrease the frequency. When set to its
+default value of '5' it means that at 1/5 the sampling_rate the kernel
+makes a decision to lower the frequency. Five "lower" decisions have
+to occur in a row before the CPU frequency is actually lower. If set
+to '1' then the frequency decreases as quickly as it increases, if set
+to '2' it decreases at half the rate of the increase.
+
+ignore_nice: this parameter takes a value of '0' or '1', when set to its
+default value of '0' then all processes are counted towards towards the
+'cpu utilisation' value. When set to '1' then processes that are run
+with a 'nice' value will not count (be ignored) in the overal usage
+calculation. This is useful if you are running a CPU intensive
+calculation on your laptop that you do not care how long it takes to
+complete as you can 'nice' it and prevent it from taking part in the
+deciding process of whether to increase your CPU frequency.
+
+
+2.5 Conservative
+----------------
+
+The CPUfreq governor "conservative", much like the "ondemand"
+governor, sets the CPU depending on the current usage. It differs in
+behaviour in that it gracefully increases and decreases the CPU speed
+rather than jumping to max speed the moment there is any load on the
+CPU. This behaviour more suitable in a battery powered environment.
+The governor is tweaked in the same manner as the "ondemand" governor
+however with the addition of:
+
+freq_step: this describes what percentage steps the cpu freq should be
+increased and decreased smoothly by, by default the cpu speed will
+increase in 5% chunks of your maximum cpu speed. You can change this
+value to anywhere between 0 and 100 where '0' will effectively lock your
+CPU at a speed regardless of its load whilst '100' will, in theory, make
+it behave identically to the "ondemand" governor.
+
+down_threshold: same as the 'up_threshold' found for the "ondemand"
+governor but for the opposite direction. For example when set to its
+default value of '20' it means that if the CPU usage needs to be below
+20% between samples to have the frequency decreased.
3. The Governor Interface in the CPUfreq Core
=============================================
reply other threads:[~2005-09-27 17:28 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200509271851.00914.blaisorblade@yahoo.it \
--to=blaisorblade@yahoo.it \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®