From: Pavel Machek <pavel@ucw.cz>
To: rpurdie@rpsys.net, lenz@cs.wisc.edu,
kernel list <linux-kernel@vger.kernel.org>,
Russell King <rmk@arm.linux.org.uk>
Subject: Sharp sl-5500 touchscreen support
Date: Thu, 13 Oct 2005 22:07:42 +0200 [thread overview]
Message-ID: <20051013200742.GA12757@elf.ucw.cz> (raw)
Hi!
This adds support for sharp zaurus sl-5500 touchscreen. It introduces
some not-too-nice ifs, but I guess copying whole ucb1x00-ts.c
would be bad idea...
Signed-off-by: Pavel Machek <pavel@suse.cz>
diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c
--- a/drivers/mfd/ucb1x00-ts.c
+++ b/drivers/mfd/ucb1x00-ts.c
@@ -32,9 +32,12 @@
#include <linux/suspend.h>
#include <linux/slab.h>
#include <linux/kthread.h>
+#include <linux/delay.h>
#include <asm/dma.h>
#include <asm/semaphore.h>
+#include <asm/arch/collie.h>
+#include <asm/mach-types.h>
#include "ucb1x00.h"
@@ -85,12 +90,23 @@ static inline void ucb1x00_ts_mode_int(s
*/
static inline unsigned int ucb1x00_ts_read_pressure(struct ucb1x00_ts *ts)
{
- ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
- UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
- UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
- UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+ if (machine_is_collie()) {
+ ucb1x00_io_write(ts->ucb, COLLIE_TC35143_GPIO_TBL_CHK, 0);
+ ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
+ UCB_TS_CR_TSPX_POW | UCB_TS_CR_TSMX_POW |
+ UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
- return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_TSPY, ts->adcsync);
+ udelay(55);
+
+ return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_AD2, ts->adcsync);
+ } else {
+ ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
+ UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
+ UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
+ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+
+ return ucb1x00_adc_read(ts->ucb, UCB_ADC_INP_TSPY, ts->adcsync);
+ }
}
/*
@@ -101,12 +117,16 @@ static inline unsigned int ucb1x00_ts_re
*/
static inline unsigned int ucb1x00_ts_read_xpos(struct ucb1x00_ts *ts)
{
- ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
- UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
- UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
- ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
- UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
- UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+ if (machine_is_collie())
+ ucb1x00_io_write(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK);
+ else {
+ ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
+ UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
+ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+ ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
+ UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
+ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+ }
ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
@@ -124,12 +144,17 @@ static inline unsigned int ucb1x00_ts_re
*/
static inline unsigned int ucb1x00_ts_read_ypos(struct ucb1x00_ts *ts)
{
- ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
- UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
- UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
- ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
- UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
- UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+ if (machine_is_collie())
+ ucb1x00_io_write(ts->ucb, 0, COLLIE_TC35143_GPIO_TBL_CHK);
+ else {
+ ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
+ UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
+ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+ ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
+ UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
+ UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+ }
+
ucb1x00_reg_write(ts->ucb, UCB_TS_CR,
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
@@ -163,6 +188,15 @@ static inline unsigned int ucb1x00_ts_re
return ucb1x00_adc_read(ts->ucb, 0, ts->adcsync);
}
+static inline int ucb1x00_ts_pen_down(struct ucb1x00_ts *ts)
+{
+ unsigned int val = ucb1x00_reg_read(ts->ucb, UCB_TS_CR);
+ if (machine_is_collie())
+ return (!(val & (UCB_TS_CR_TSPX_LOW)));
+ else
+ return (val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW));
+}
+
/*
* This is a RT kernel thread that handles the ADC accesses
* (mainly so we can use semaphores in the UCB1200 core code
@@ -186,7 +220,7 @@ static int ucb1x00_thread(void *_ts)
add_wait_queue(&ts->irq_wait, &wait);
while (!kthread_should_stop()) {
- unsigned int x, y, p, val;
+ unsigned int x, y, p;
signed long timeout;
ts->restart = 0;
@@ -206,12 +240,12 @@ static int ucb1x00_thread(void *_ts)
msleep(10);
ucb1x00_enable(ts->ucb);
- val = ucb1x00_reg_read(ts->ucb, UCB_TS_CR);
- if (val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW)) {
+
+ if (ucb1x00_ts_pen_down(ts)) {
set_task_state(tsk, TASK_INTERRUPTIBLE);
- ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_FALLING);
+ ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, machine_is_collie() ? UCB_RISING : UCB_FALLING);
ucb1x00_disable(ts->ucb);
/*
--
Thanks, Sharp!
reply other threads:[~2005-10-13 20:08 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20051013200742.GA12757@elf.ucw.cz \
--to=pavel@ucw.cz \
--cc=lenz@cs.wisc.edu \
--cc=linux-kernel@vger.kernel.org \
--cc=rmk@arm.linux.org.uk \
--cc=rpurdie@rpsys.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome