Re: ohci1394 unhandled interrupts bug in 2.6.14-rc2

[Andrew Morton <akpm@osdl.org>]

Jesse Barnes <jbarnes@virtuousgeek.org> wrote:
>
> diff -X linux-2.6.14-rc2/Documentation/dontdiff -Naur linux-2.6.14-rc2.orig/drivers/ieee1394/ohci1394.c linux-2.6.14-rc2/drivers/ieee1394/ohci1394.c
> --- linux-2.6.14-rc2.orig/drivers/ieee1394/ohci1394.c	2005-09-19 20:00:41.000000000 -0700
> +++ linux-2.6.14-rc2/drivers/ieee1394/ohci1394.c	2005-10-15 12:55:08.000000000 -0700
> @@ -169,6 +169,10 @@
>  module_param(phys_dma, int, 0644);
>  MODULE_PARM_DESC(phys_dma, "Enable physical dma (default = 1).");
>  
> +static int toshiba __initdata = 0;
> +module_param(toshiba, bool, 0);
> +MODULE_PARM_DESC(toshiba, "Toshiba Legacy-Free BIOS workaround (default=0).");
> +
>  static void dma_trm_tasklet(unsigned long data);
>  static void dma_trm_reset(struct dma_trm_ctx *d);
>  
> @@ -3222,14 +3226,28 @@
>  	struct hpsb_host *host;
>  	struct ti_ohci *ohci;	/* shortcut to currently handled device */
>  	unsigned long ohci_base;
> +	u16  toshiba_data;
>  
>  	if (version_printed++ == 0)
>  		PRINT_G(KERN_INFO, "%s", version);
>  
> +	if (toshiba) {
> +		dev->current_state = 4;
> +		pci_read_config_word(dev, PCI_CACHE_LINE_SIZE, &toshiba_data);
> +	}
> +
>          if (pci_enable_device(dev))
>  		FAIL(-ENXIO, "Failed to enable OHCI hardware");
>          pci_set_master(dev);
>  
> +	if (toshiba) {
> +		mdelay(10);
> +		pci_write_config_word(dev, PCI_CACHE_LINE_SIZE, toshiba_data);
> +		pci_write_config_word(dev, PCI_INTERRUPT_LINE, dev->irq);
> +		pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, pci_resource_start(dev, 0));
> +		pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, pci_resource_start(dev, 1));
> + 	}
> +
>  	host = hpsb_alloc_host(&ohci1394_driver, sizeof(struct ti_ohci), &dev->dev);
>  	if (!host) FAIL(-ENOMEM, "Failed to allocate host structure");

It would be really really preferable if we could find some automatic way of
doing this.  Is it possible to use DMI matching, like
arch/i386/kernel/acpi/sleep.c:acpisleep_dmi_table ?