From: Michal Vanco <michal.vanco@satro.sk>
To: linux-kernel@vger.kernel.org
Subject: HDD LED on 82801FBM
Date: Mon, 31 Oct 2005 19:44:42 +0100 [thread overview]
Message-ID: <200510311944.45295.michal.vanco@satro.sk> (raw)
[-- Attachment #1: Type: text/plain, Size: 1570 bytes --]
Hi all,
HDD LED on my Laptop (Fujitsu-Siemens LB E8020) never goes off when 2.6 kernel
is running (tested with 2.6.10-2.6.13.4).
My controller is:
$ lspci | grep SATA
0000:00:1f.2 0106: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04)
This is from my dmesg:
ahci(0000:00:1f.2) AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
ahci(0000:00:1f.2) flags: 64bit ncq pm led slum part
ata1: SATA max UDMA/133 cmd 0xE0820D00 ctl 0x0 bmdma 0x0 irq 225
ata2: SATA max UDMA/133 cmd 0xE0820D80 ctl 0x0 bmdma 0x0 irq 225
ata3: SATA max UDMA/133 cmd 0xE0820E00 ctl 0x0 bmdma 0x0 irq 225
ata4: SATA max UDMA/133 cmd 0xE0820E80 ctl 0x0 bmdma 0x0 irq 225
ata1: dev 0 cfg 49:2f00 82:346b 83:7f09 84:6063 85:3469 86:3f09 87:6063
88:203f
ata1: dev 0 ATA, max UDMA/100, 156301488 sectors: lba48
ata1: dev 0 configured for UDMA/100
scsi0 : ahci
ata2: no device found (phy stat 00000000)
scsi1 : ahci
ata3: no device found (phy stat 00000000)
scsi2 : ahci
ata4: no device found (phy stat 00000000)
scsi3 : ahci
Vendor: ATA Model: FUJITSU MHT2080B Rev: 0000
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Is this common problem?
thanx
-michal
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
next reply other threads:[~2005-10-31 18:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-31 18:44 Michal Vanco [this message]
2005-10-31 19:05 ` Jens Axboe
2005-10-31 19:06 ` Michal Vanco
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200510311944.45295.michal.vanco@satro.sk \
--to=michal.vanco@satro.sk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®