From: Benoit Boissinot <bboissin@gmail.com>
To: Reuben Farrelly <reuben-lkml@reub.net>
Cc: Andrew Morton <akpm@osdl.org>, linux-kernel@vger.kernel.org
Subject: Re: 2.6.14-mm1
Date: Mon, 7 Nov 2005 09:24:55 +0100 [thread overview]
Message-ID: <20051107082455.GA20374@ens-lyon.fr> (raw)
In-Reply-To: <436ED3C7.8090006@reub.net>
On 11/7/05, Reuben Farrelly <reuben-lkml@reub.net> wrote:
> Hi,
>
> Ok a couple of things so far:
>
> Firstly:
>
> CC [M] drivers/edac/edac_mc.o
> drivers/edac/edac_mc.c: In function 'edac_mc_scrub_block':
> drivers/edac/edac_mc.c:647: error: syntax error before 'asm'
> drivers/edac/edac_mc.c:647: error: void value not ignored as it ought to be
> drivers/edac/edac_mc.c:653: warning: passing argument 1 of 'page_zone' makes
> pointer from integer without a cast
> drivers/edac/edac_mc.c:653: error: syntax error before 'do'
> drivers/edac/edac_mc.c:653: error: '__dummy' undeclared (first use in this function)
> drivers/edac/edac_mc.c:653: error: (Each undeclared identifier is reported only once
> drivers/edac/edac_mc.c:653: error: for each function it appears in.)
> drivers/edac/edac_mc.c: At top level:
> drivers/edac/edac_mc.c:653: error: syntax error before 'while'
> make[2]: *** [drivers/edac/edac_mc.o] Error 1
> make[1]: *** [drivers/edac] Error 2
> make: *** [drivers] Error 2
>
The following patch fixes it
Signed-Off-By: Benoit Boissinot <benoit.boissinot@ens-lyon.org>
Index: linux/include/linux/highmem.h
===================================================================
--- linux.orig/include/linux/highmem.h
+++ linux/include/linux/highmem.h
@@ -21,7 +21,7 @@ unsigned int nr_free_highpages(void);
*/
#define kmap_atomic_maybe_irqsave(page, idx, flags) \
({ \
- if (PageHighMem(page) \
+ if (PageHighMem(page)) \
local_irq_save(flags); \
kmap_atomic(page, idx); \
})
@@ -29,7 +29,7 @@ unsigned int nr_free_highpages(void);
#define kunmap_atomic_maybe_irqrestore(addr, idx, flags) \
({ \
kunmap_atomic(addr, idx); \
- if (PageHighMem(page) \
+ if (PageHighMem(page)) \
local_irq_restore(flags); \
})
next prev parent reply other threads:[~2005-11-07 8:25 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-07 2:24 2.6.14-mm1 Andrew Morton
2005-11-07 3:25 ` 2.6.14-mm1 Christoph Hellwig
2005-11-07 6:12 ` 2.6.14-mm1 Andrew Morton
2005-11-07 6:34 ` 2.6.14-mm1 Herbert Xu
2005-11-07 3:30 ` 2.6.14-mm1 Christoph Hellwig
2005-11-07 12:18 ` 2.6.14-mm1 Roman Zippel
2005-11-07 17:02 ` 2.6.14-mm1 Christoph Hellwig
2005-11-07 17:23 ` 2.6.14-mm1 Roman Zippel
2005-11-07 12:41 ` 2.6.14-mm1 Geert Uytterhoeven
2005-11-07 4:04 ` 2.6.14-mm1 Brice Goglin
2005-11-07 4:10 ` 2.6.14-mm1 Reuben Farrelly
2005-11-07 6:07 ` 2.6.14-mm1 Andrew Morton
2005-11-07 8:24 ` Benoit Boissinot [this message]
2005-11-07 9:54 ` 2.6.14-mm1 Reuben Farrelly
2005-11-07 10:09 ` 2.6.14-mm1 Andrew Morton
2005-11-07 10:26 ` 2.6.14-mm1 Neil Brown
2005-11-07 10:37 ` 2.6.14-mm1 Andrew Morton
2005-11-07 10:44 ` 2.6.14-mm1 Reuben Farrelly
2005-11-07 18:52 ` 2.6.14-mm1 Andrew Morton
2005-11-07 19:27 ` 2.6.14-mm1 Alan Stern
2005-11-07 21:43 ` 2.6.14-mm1 J.A. Magallon
2005-11-08 0:07 ` 2.6.14-mm1 J.A. Magallon
2005-11-08 14:21 ` 2.6.14-mm1 James Bottomley
2005-11-09 0:30 ` 2.6.14-mm1 Reuben Farrelly
2005-11-07 12:00 ` 2.6.14-mm1 Jiri Slaby
2005-11-07 15:04 ` 2.6.14-mm1 Dustin Kirkland
2005-11-07 15:11 ` 2.6.14-mm1 Jiri Slaby
2005-11-07 16:15 ` 2.6.14-mm1 Alexander E. Patrakov
2005-11-07 19:52 ` 2.6.14-mm1 Andrew Morton
2005-11-07 20:07 ` 2.6.14-mm1 Greg KH
2005-11-07 20:30 ` 2.6.14-mm1 Dmitry Torokhov
2005-11-07 20:21 ` 2.6.14-mm1 Valdis.Kletnieks
2005-11-07 20:40 ` 2.6.14-mm1 Dmitry Torokhov
2005-11-07 20:46 ` 2.6.14-mm1 Andrew Morton
2005-11-11 9:32 ` 2.6.14-mm1 Alexander E. Patrakov
[not found] ` <437472DA.4090001@linuxfromscratch.org>
2005-11-11 11:50 ` 2.6.14-mm1 Alexander E. Patrakov
2005-11-07 17:37 ` 2.6.14-mm1: drivers/pci/hotplug/: namespace clashes Adrian Bunk
2005-11-07 18:41 ` Rajesh Shah
2005-11-07 20:03 ` Adrian Bunk
2005-11-07 21:37 ` Rajesh Shah
2005-11-07 21:10 ` 2.6.14-mm1: Why is USB_LIBUSUAL user-visible? Adrian Bunk
2005-11-07 21:52 ` Greg KH
2005-11-07 22:26 ` [linux-usb-devel] " Alan Stern
2005-11-07 22:28 ` Greg KH
2005-11-08 0:47 ` [-mm patch] USB_LIBUSUAL shouldn't be user-visible Adrian Bunk
2005-11-09 22:28 ` Greg KH
2005-11-10 6:41 ` Pete Zaitcev
2005-11-10 10:56 ` Adrian Bunk
2005-11-10 23:46 ` Greg KH
2005-11-11 2:09 ` Adrian Bunk
2005-11-11 6:13 ` Greg KH
2005-11-11 9:31 ` Pete Zaitcev
2005-11-10 12:11 ` Reuben Farrelly
2005-11-11 9:14 ` Pete Zaitcev
2005-11-07 23:34 ` 2.6.14-mm1: Why is USB_LIBUSUAL user-visible? Pete Zaitcev
2005-11-07 22:28 ` 2.6.14-mm1 - cpufreq build problem Rafael J. Wysocki
2005-11-08 4:36 ` [-mm patch] __deprecated_for_modules the lookup_hash() prototype Adrian Bunk
2005-11-10 13:07 ` 2.6.14-mm1 Serge Hallyn
[not found] ` <OFE00FE25C.725B5669-ON872570B5.0066EFF0-862570B5.00679646@us.ibm.com>
2005-11-11 17:59 ` 2.6.14-mm1 Serge Hallyn
2005-11-14 17:05 ` 2.6.14-mm1 Greg KH
2005-11-12 0:31 ` 2.6.14-mm1 Michal Piotrowski
2005-11-12 0:51 ` 2.6.14-mm1 Andrew Morton
2005-11-12 1:30 ` 2.6.14-mm1 Michal Piotrowski
2005-11-12 1:47 ` 2.6.14-mm1 Andrew Morton
2005-11-12 18:00 ` 2.6.14-mm1 Michal Piotrowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20051107082455.GA20374@ens-lyon.fr \
--to=bboissin@gmail.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=reuben-lkml@reub.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®