From: john stultz <johnstul@us.ibm.com>
To: lkml <linux-kernel@vger.kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>, Darren Hart <dvhltc@us.ibm.com>,
Nishanth Aravamudan <nacc@us.ibm.com>,
Frank Sorenson <frank@tuxrocks.com>,
George Anzinger <george@mvista.com>,
Roman Zippel <zippel@linux-m68k.org>,
Ulrich Windl <ulrich.windl@rz.uni-regensburg.de>,
Thomas Gleixner <tglx@linutronix.de>,
john stultz <johnstul@us.ibm.com>,
john stultz <johnstul@us.ibm.com>
Subject: [PATCH 5/13] Time: i386 Conversion - part 1: Move timer_pit.c to i8253.c
Date: Mon, 21 Nov 2005 18:35:48 -0700 [thread overview]
Message-ID: <20051122013548.18537.97737.sendpatchset@cog.beaverton.ibm.com> (raw)
In-Reply-To: <20051122013515.18537.76463.sendpatchset@cog.beaverton.ibm.com>
All,
The conversion of i386 to use the generic timeofday subsystem has been
split into 6 parts. This patch, the first of six, is just a simple
cleanup for the i386 arch in preparation of moving to the generic
timeofday infrastructure. It simply moves some code from timer_pit.c to
i8253.c.
It applies on top of my timeofday-core patch. This patch is part the
timeofday-arch-i386 patchset, so without the following parts it is not
expected to compile (although just this one should).
thanks
-john
Signed-off-by: John Stultz <johnstul@us.ibm.com>
linux-2.6.15-rc1-mm2_timeofday-arch-i386-part1_B11.patch
============================================
diff -ruN tod-mm_1/arch/i386/kernel/i8253.c tod-mm_2/arch/i386/kernel/i8253.c
--- tod-mm_1/arch/i386/kernel/i8253.c 1969-12-31 16:00:00.000000000 -0800
+++ tod-mm_2/arch/i386/kernel/i8253.c 2005-11-21 16:48:22.000000000 -0800
@@ -0,0 +1,57 @@
+/*
+ * i8253.c 8253/PIT functions
+ *
+ */
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/spinlock.h>
+#include <linux/sysdev.h>
+#include <linux/module.h>
+
+#include <asm/delay.h>
+#include <asm/i8253.h>
+#include <asm/io.h>
+
+#include "io_ports.h"
+
+DEFINE_SPINLOCK(i8253_lock);
+EXPORT_SYMBOL(i8253_lock);
+
+void setup_pit_timer(void)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&i8253_lock, flags);
+ outb_p(0x34,PIT_MODE); /* binary, mode 2, LSB/MSB, ch 0 */
+ udelay(10);
+ outb_p(LATCH & 0xff , PIT_CH0); /* LSB */
+ udelay(10);
+ outb(LATCH >> 8 , PIT_CH0); /* MSB */
+ spin_unlock_irqrestore(&i8253_lock, flags);
+}
+
+static int timer_resume(struct sys_device *dev)
+{
+ setup_pit_timer();
+ return 0;
+}
+
+static struct sysdev_class timer_sysclass = {
+ set_kset_name("timer_pit"),
+ .resume = timer_resume,
+};
+
+static struct sys_device device_timer = {
+ .id = 0,
+ .cls = &timer_sysclass,
+};
+
+static int __init init_timer_sysfs(void)
+{
+ int error = sysdev_class_register(&timer_sysclass);
+ if (!error)
+ error = sysdev_register(&device_timer);
+ return error;
+}
+
+device_initcall(init_timer_sysfs);
diff -ruN tod-mm_1/arch/i386/kernel/Makefile tod-mm_2/arch/i386/kernel/Makefile
--- tod-mm_1/arch/i386/kernel/Makefile 2005-11-21 16:39:09.000000000 -0800
+++ tod-mm_2/arch/i386/kernel/Makefile 2005-11-21 16:48:37.000000000 -0800
@@ -7,7 +7,7 @@
obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o vm86.o \
ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \
pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o \
- quirks.o i8237.o
+ quirks.o i8237.o i8253.o
obj-y += cpu/
obj-y += timers/
diff -ruN tod-mm_1/arch/i386/kernel/time.c tod-mm_2/arch/i386/kernel/time.c
--- tod-mm_1/arch/i386/kernel/time.c 2005-11-21 16:39:09.000000000 -0800
+++ tod-mm_2/arch/i386/kernel/time.c 2005-11-21 16:48:22.000000000 -0800
@@ -82,11 +82,6 @@
DEFINE_SPINLOCK(rtc_lock);
EXPORT_SYMBOL(rtc_lock);
-#include <asm/i8253.h>
-
-DEFINE_SPINLOCK(i8253_lock);
-EXPORT_SYMBOL(i8253_lock);
-
struct timer_opts *cur_timer __read_mostly = &timer_none;
/*
@@ -400,7 +395,6 @@
if (is_hpet_enabled())
hpet_reenable();
#endif
- setup_pit_timer();
sec = get_cmos_time() + clock_cmos_diff;
sleep_length = (get_cmos_time() - sleep_start) * HZ;
write_seqlock_irqsave(&xtime_lock, flags);
diff -ruN tod-mm_1/arch/i386/kernel/timers/timer_pit.c tod-mm_2/arch/i386/kernel/timers/timer_pit.c
--- tod-mm_1/arch/i386/kernel/timers/timer_pit.c 2005-11-21 16:39:09.000000000 -0800
+++ tod-mm_2/arch/i386/kernel/timers/timer_pit.c 2005-11-21 16:48:22.000000000 -0800
@@ -162,16 +162,3 @@
.init = init_pit,
.opts = &timer_pit,
};
-
-void setup_pit_timer(void)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&i8253_lock, flags);
- outb_p(0x34,PIT_MODE); /* binary, mode 2, LSB/MSB, ch 0 */
- udelay(10);
- outb_p(LATCH & 0xff , PIT_CH0); /* LSB */
- udelay(10);
- outb(LATCH >> 8 , PIT_CH0); /* MSB */
- spin_unlock_irqrestore(&i8253_lock, flags);
-}
next prev parent reply other threads:[~2005-11-22 1:38 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-22 1:35 [PATCH 0/13] Time: Generic Timeofday Subsystem (v B11) john stultz
2005-11-22 1:35 ` [PATCH 1/13] Time: Reduced NTP rework (part 1) john stultz
2005-11-26 14:52 ` [patch] warn-on-once.patch Ingo Molnar
2005-11-26 15:03 ` Tim Schmielau
2005-11-26 15:03 ` Michal Schmidt
2005-11-26 15:17 ` Ingo Molnar
2005-11-26 15:21 ` Ingo Molnar
2005-11-26 14:52 ` [PATCH 1/13] Time: Reduced NTP rework (part 1) Ingo Molnar
2005-11-22 1:35 ` [PATCH 2/13] Time: Reduced NTP Rework (part 2) john stultz
2005-11-26 14:53 ` Ingo Molnar
2005-11-22 1:35 ` [PATCH 3/13] Time: Clocksource Infrastructure john stultz
2005-11-26 14:53 ` Ingo Molnar
2005-11-22 1:35 ` [PATCH 4/13] Time: Generic Timekeeping Infrastructure john stultz
2005-11-26 14:54 ` Ingo Molnar
2005-11-22 1:35 ` john stultz [this message]
2005-11-26 14:54 ` [PATCH 5/13] Time: i386 Conversion - part 1: Move timer_pit.c to i8253.c Ingo Molnar
2005-11-22 1:35 ` [PATCH 6/13] Time: i386 Conversion - part 2: Move timer_tsc.c to tsc.c john stultz
2005-11-26 14:54 ` Ingo Molnar
2005-11-22 1:36 ` [PATCH 7/13] Time: i386 Conversion - part 3: Rework TSC Support john stultz
2005-11-22 1:36 ` [PATCH 8/13] Time: i386 Conversion - part 4: ACPI PM variable renaming john stultz
2005-11-22 1:36 ` [PATCH 9/13] Time: i386 Conversion - part 5: Enable Generic Timekeeping john stultz
2005-11-26 14:55 ` Ingo Molnar
2005-11-22 1:36 ` [PATCH 10/13] Time: i386 Conversion - part 6: Remove Old Code john stultz
2005-11-22 1:36 ` [PATCH 11/13] Time: x86-64 Conversion to Generic Timekeeping john stultz
2005-11-26 14:55 ` Ingo Molnar
2005-11-26 15:11 ` Ingo Molnar
2005-11-22 1:36 ` [PATCH 12/13] Time: i386/x86-64 Clocksource Drivers john stultz
2005-11-26 14:55 ` Ingo Molnar
2005-11-22 1:36 ` [PATCH 13/13] Time: Generic Timekeeping Paraniod Debug Patch john stultz
2005-11-22 2:03 ` [PATCH 0/13] Time: Generic Timeofday Subsystem (v B11) john stultz
2005-11-26 14:50 ` Ingo Molnar
2005-11-26 14:58 ` Ingo Molnar
-- strict thread matches above, loose matches on Subject: below --
2005-12-15 2:00 [PATCH 0/13] Time: Generic Timeofday Subsystem (v B14) john stultz
2005-12-15 2:00 ` [PATCH 5/13] Time: i386 Conversion - part 1: Move timer_pit.c to i8253.c john stultz
2005-12-06 4:13 [PATCH 0/13] Time: Generic Timeofday Subsystem (v B13) john stultz
2005-12-06 4:14 ` [PATCH 5/13] Time: i386 Conversion - part 1: Move timer_pit.c to i8253.c john stultz
2005-12-02 3:25 [PATCH 0/13] Time: Generic Timeofday Subsystem (v B12) john stultz
2005-12-02 3:26 ` [PATCH 5/13] Time: i386 Conversion - part 1: Move timer_pit.c to i8253.c john stultz
2005-11-12 4:48 [PATCH 0/13] Time: Generic Timeofday Subsystem (v B10) john stultz
2005-11-12 4:49 ` [PATCH 5/13] Time: i386 Conversion - part 1: Move timer_pit.c to i8253.c john stultz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20051122013548.18537.97737.sendpatchset@cog.beaverton.ibm.com \
--to=johnstul@us.ibm.com \
--cc=dvhltc@us.ibm.com \
--cc=frank@tuxrocks.com \
--cc=george@mvista.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=nacc@us.ibm.com \
--cc=tglx@linutronix.de \
--cc=ulrich.windl@rz.uni-regensburg.de \
--cc=zippel@linux-m68k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome