From: David Howells <dhowells@redhat.com>
To: torvalds@osdl.org, akpm@osdl.org, dalomar@serrasold.com
Cc: linux-kernel@vger.kernel.org, uclinux-dev@uclinux.org
Subject: [PATCH 3/3] FRV: Implement futex operations for FRV
Date: Wed, 23 Nov 2005 18:59:48 GMT [thread overview]
Message-ID: <200511231859.jANIxmOG032278@warthog.cambridge.redhat.com> (raw)
In-Reply-To: <dhowells1132772387@warthog.cambridge.redhat.com>
The attached patch implements futex operations for the FRV architecture. The
operations are applicable to both MMU and no-MMU modes; though the EFAULT
handling will be a little bit of wasted space on the latter.
Signed-Off-By: David Howells <dhowells@redhat.com>
---
warthog>diffstat -p1 frv-futexop-2615rc2.diff
arch/frv/kernel/Makefile | 1
arch/frv/kernel/futex.c | 242 +++++++++++++++++++++++++++++++++++++++++++++++
include/asm-frv/futex.h | 42 --------
3 files changed, 244 insertions(+), 41 deletions(-)
diff -uNrp linux-2.6.15-rc2-frv/arch/frv/kernel/futex.c linux-2.6.15-rc2-frv-shmem/arch/frv/kernel/futex.c
--- linux-2.6.15-rc2-frv/arch/frv/kernel/futex.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.15-rc2-frv-shmem/arch/frv/kernel/futex.c 2005-11-23 18:09:40.000000000 +0000
@@ -0,0 +1,242 @@
+/* futex.c: futex operations
+ *
+ * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/futex.h>
+#include <asm/futex.h>
+#include <asm/errno.h>
+#include <asm/uaccess.h>
+
+/*
+ * the various futex operations; MMU fault checking is ignored under no-MMU
+ * conditions
+ */
+static inline int atomic_futex_op_xchg_set(int oparg, int __user *uaddr, int *_oldval)
+{
+ int oldval, ret;
+
+ asm("0: \n"
+ " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */
+ " ckeq icc3,cc7 \n"
+ "1: ld.p %M0,%1 \n" /* LD.P/ORCR must be atomic */
+ " orcr cc7,cc7,cc3 \n" /* set CC3 to true */
+ "2: cst.p %3,%M0 ,cc3,#1 \n"
+ " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* clear ICC3.Z if store happens */
+ " beq icc3,#0,0b \n"
+ " setlos 0,%2 \n"
+ "3: \n"
+ ".subsection 2 \n"
+ "4: setlos %5,%2 \n"
+ " bra 3b \n"
+ ".previous \n"
+ ".section __ex_table,\"a\" \n"
+ " .balign 8 \n"
+ " .long 1b,4b \n"
+ " .long 2b,4b \n"
+ ".previous"
+ : "+U"(*uaddr), "=&r"(oldval), "=&r"(ret), "=r"(oparg)
+ : "3"(oparg), "i"(-EFAULT)
+ : "memory", "cc7", "cc3", "icc3"
+ );
+
+ *_oldval = oldval;
+ return ret;
+}
+
+static inline int atomic_futex_op_xchg_add(int oparg, int __user *uaddr, int *_oldval)
+{
+ int oldval, ret;
+
+ asm("0: \n"
+ " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */
+ " ckeq icc3,cc7 \n"
+ "1: ld.p %M0,%1 \n" /* LD.P/ORCR must be atomic */
+ " orcr cc7,cc7,cc3 \n" /* set CC3 to true */
+ " add %1,%3,%3 \n"
+ "2: cst.p %3,%M0 ,cc3,#1 \n"
+ " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* clear ICC3.Z if store happens */
+ " beq icc3,#0,0b \n"
+ " setlos 0,%2 \n"
+ "3: \n"
+ ".subsection 2 \n"
+ "4: setlos %5,%2 \n"
+ " bra 3b \n"
+ ".previous \n"
+ ".section __ex_table,\"a\" \n"
+ " .balign 8 \n"
+ " .long 1b,4b \n"
+ " .long 2b,4b \n"
+ ".previous"
+ : "+U"(*uaddr), "=&r"(oldval), "=&r"(ret), "=r"(oparg)
+ : "3"(oparg), "i"(-EFAULT)
+ : "memory", "cc7", "cc3", "icc3"
+ );
+
+ *_oldval = oldval;
+ return ret;
+}
+
+static inline int atomic_futex_op_xchg_or(int oparg, int __user *uaddr, int *_oldval)
+{
+ int oldval, ret;
+
+ asm("0: \n"
+ " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */
+ " ckeq icc3,cc7 \n"
+ "1: ld.p %M0,%1 \n" /* LD.P/ORCR must be atomic */
+ " orcr cc7,cc7,cc3 \n" /* set CC3 to true */
+ " or %1,%3,%3 \n"
+ "2: cst.p %3,%M0 ,cc3,#1 \n"
+ " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* clear ICC3.Z if store happens */
+ " beq icc3,#0,0b \n"
+ " setlos 0,%2 \n"
+ "3: \n"
+ ".subsection 2 \n"
+ "4: setlos %5,%2 \n"
+ " bra 3b \n"
+ ".previous \n"
+ ".section __ex_table,\"a\" \n"
+ " .balign 8 \n"
+ " .long 1b,4b \n"
+ " .long 2b,4b \n"
+ ".previous"
+ : "+U"(*uaddr), "=&r"(oldval), "=&r"(ret), "=r"(oparg)
+ : "3"(oparg), "i"(-EFAULT)
+ : "memory", "cc7", "cc3", "icc3"
+ );
+
+ *_oldval = oldval;
+ return ret;
+}
+
+static inline int atomic_futex_op_xchg_and(int oparg, int __user *uaddr, int *_oldval)
+{
+ int oldval, ret;
+
+ asm("0: \n"
+ " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */
+ " ckeq icc3,cc7 \n"
+ "1: ld.p %M0,%1 \n" /* LD.P/ORCR must be atomic */
+ " orcr cc7,cc7,cc3 \n" /* set CC3 to true */
+ " and %1,%3,%3 \n"
+ "2: cst.p %3,%M0 ,cc3,#1 \n"
+ " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* clear ICC3.Z if store happens */
+ " beq icc3,#0,0b \n"
+ " setlos 0,%2 \n"
+ "3: \n"
+ ".subsection 2 \n"
+ "4: setlos %5,%2 \n"
+ " bra 3b \n"
+ ".previous \n"
+ ".section __ex_table,\"a\" \n"
+ " .balign 8 \n"
+ " .long 1b,4b \n"
+ " .long 2b,4b \n"
+ ".previous"
+ : "+U"(*uaddr), "=&r"(oldval), "=&r"(ret), "=r"(oparg)
+ : "3"(oparg), "i"(-EFAULT)
+ : "memory", "cc7", "cc3", "icc3"
+ );
+
+ *_oldval = oldval;
+ return ret;
+}
+
+static inline int atomic_futex_op_xchg_xor(int oparg, int __user *uaddr, int *_oldval)
+{
+ int oldval, ret;
+
+ asm("0: \n"
+ " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */
+ " ckeq icc3,cc7 \n"
+ "1: ld.p %M0,%1 \n" /* LD.P/ORCR must be atomic */
+ " orcr cc7,cc7,cc3 \n" /* set CC3 to true */
+ " xor %1,%3,%3 \n"
+ "2: cst.p %3,%M0 ,cc3,#1 \n"
+ " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* clear ICC3.Z if store happens */
+ " beq icc3,#0,0b \n"
+ " setlos 0,%2 \n"
+ "3: \n"
+ ".subsection 2 \n"
+ "4: setlos %5,%2 \n"
+ " bra 3b \n"
+ ".previous \n"
+ ".section __ex_table,\"a\" \n"
+ " .balign 8 \n"
+ " .long 1b,4b \n"
+ " .long 2b,4b \n"
+ ".previous"
+ : "+U"(*uaddr), "=&r"(oldval), "=&r"(ret), "=r"(oparg)
+ : "3"(oparg), "i"(-EFAULT)
+ : "memory", "cc7", "cc3", "icc3"
+ );
+
+ *_oldval = oldval;
+ return ret;
+}
+
+/*****************************************************************************/
+/*
+ * do the futex operations
+ */
+int futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
+{
+ int op = (encoded_op >> 28) & 7;
+ int cmp = (encoded_op >> 24) & 15;
+ int oparg = (encoded_op << 8) >> 20;
+ int cmparg = (encoded_op << 20) >> 20;
+ int oldval = 0, ret;
+
+ if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+ oparg = 1 << oparg;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ inc_preempt_count();
+
+ switch (op) {
+ case FUTEX_OP_SET:
+ ret = atomic_futex_op_xchg_set(oparg, uaddr, &oldval);
+ break;
+ case FUTEX_OP_ADD:
+ ret = atomic_futex_op_xchg_add(oparg, uaddr, &oldval);
+ break;
+ case FUTEX_OP_OR:
+ ret = atomic_futex_op_xchg_or(oparg, uaddr, &oldval);
+ break;
+ case FUTEX_OP_ANDN:
+ ret = atomic_futex_op_xchg_and(~oparg, uaddr, &oldval);
+ break;
+ case FUTEX_OP_XOR:
+ ret = atomic_futex_op_xchg_xor(oparg, uaddr, &oldval);
+ break;
+ default:
+ ret = -ENOSYS;
+ break;
+ }
+
+ dec_preempt_count();
+
+ if (!ret) {
+ switch (cmp) {
+ case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+ case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+ case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+ case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+ case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+ case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+ default: ret = -ENOSYS; break;
+ }
+ }
+
+ return ret;
+
+} /* end futex_atomic_op_inuser() */
diff -uNrp linux-2.6.15-rc2-frv/arch/frv/kernel/Makefile linux-2.6.15-rc2-frv-shmem/arch/frv/kernel/Makefile
--- linux-2.6.15-rc2-frv/arch/frv/kernel/Makefile 2005-03-02 12:07:44.000000000 +0000
+++ linux-2.6.15-rc2-frv-shmem/arch/frv/kernel/Makefile 2005-11-23 18:10:10.000000000 +0000
@@ -20,3 +20,4 @@ obj-$(CONFIG_FUJITSU_MB93493) += irq-mb9
obj-$(CONFIG_PM) += pm.o cmode.o
obj-$(CONFIG_MB93093_PDK) += pm-mb93093.o
obj-$(CONFIG_SYSCTL) += sysctl.o
+obj-$(CONFIG_FUTEX) += futex.o
diff -uNrp linux-2.6.15-rc2-frv/include/asm-frv/futex.h linux-2.6.15-rc2-frv-shmem/include/asm-frv/futex.h
--- linux-2.6.15-rc2-frv/include/asm-frv/futex.h 2005-11-01 13:19:17.000000000 +0000
+++ linux-2.6.15-rc2-frv-shmem/include/asm-frv/futex.h 2005-11-23 17:58:48.000000000 +0000
@@ -7,47 +7,7 @@
#include <asm/errno.h>
#include <asm/uaccess.h>
-static inline int
-futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
-{
- int op = (encoded_op >> 28) & 7;
- int cmp = (encoded_op >> 24) & 15;
- int oparg = (encoded_op << 8) >> 20;
- int cmparg = (encoded_op << 20) >> 20;
- int oldval = 0, ret;
- if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
- oparg = 1 << oparg;
-
- if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
- return -EFAULT;
-
- inc_preempt_count();
-
- switch (op) {
- case FUTEX_OP_SET:
- case FUTEX_OP_ADD:
- case FUTEX_OP_OR:
- case FUTEX_OP_ANDN:
- case FUTEX_OP_XOR:
- default:
- ret = -ENOSYS;
- }
-
- dec_preempt_count();
-
- if (!ret) {
- switch (cmp) {
- case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
- case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
- case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
- case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
- case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
- case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
- default: ret = -ENOSYS;
- }
- }
- return ret;
-}
+extern int futex_atomic_op_inuser(int encoded_op, int __user *uaddr);
#endif
#endif
next prev parent reply other threads:[~2005-11-23 19:00 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-23 18:59 [PATCH 1/3] NOMMU: Provide shared-writable mmap support on ramfs David Howells
2005-11-23 18:59 ` David Howells [this message]
2005-11-23 18:59 ` [PATCH 2/3] NOMMU: Make SYSV IPC SHM use ramfs facilities on NOMMU David Howells
2005-11-23 19:09 ` [PATCH 1/3] NOMMU: Provide shared-writable mmap support on ramfs Linus Torvalds
2005-11-23 19:23 ` David Howells
2005-11-23 19:25 ` David Howells
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200511231859.jANIxmOG032278@warthog.cambridge.redhat.com \
--to=dhowells@redhat.com \
--cc=akpm@osdl.org \
--cc=dalomar@serrasold.com \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@osdl.org \
--cc=uclinux-dev@uclinux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®