From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751373AbVK2PL7 (ORCPT ); Tue, 29 Nov 2005 10:11:59 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751375AbVK2PL7 (ORCPT ); Tue, 29 Nov 2005 10:11:59 -0500 Received: from vms048pub.verizon.net ([206.46.252.48]:20616 "EHLO vms048pub.verizon.net") by vger.kernel.org with ESMTP id S1751373AbVK2PL6 (ORCPT ); Tue, 29 Nov 2005 10:11:58 -0500 Date: Tue, 29 Nov 2005 10:11:20 -0500 From: Gene Heskett Subject: Re: cx88 totally fried in 2.6.15-rcX -was- Re: HD3000 - no NTSC via tuner In-reply-to: <438BDF72.1000704@m1k.net> To: linux-kernel@vger.kernel.org Cc: Michael Krufky , Linux and Kernel Video Message-id: <200511291011.20688.gene.heskett@verizon.net> Organization: None, usuallly detectable by casual observers MIME-version: 1.0 Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7bit Content-disposition: inline References: <200511282205.jASM5YUI018061@p-chan.krl.com> <200511282340.46506.gene.heskett@verizon.net> <438BDF72.1000704@m1k.net> User-Agent: KMail/1.7 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On Monday 28 November 2005 23:56, Michael Krufky wrote: >Gene Heskett wrote: >>On Monday 28 November 2005 22:43, Michael Krufky wrote: >>>Michael Krufky wrote: >>>>Gene Heskett wrote: >>>>>Like I said, complete instructions please so that we are on the >>>>> same page. I still have the rc2-git6 tree that didn't work, so as >>>>> my script does a make clean, it should be easy enough to do with >>>>> the right instructions. Like what dir in the kernel tree am I >>>>> supposed to be in when I issue the cvs checkout command etc. >>> >>>Oops.... I forgot to answer this question.... >>> >>>It doesnt matter in what directory you are issuing the commands >>>below... Although you certainly should NOT issue these within your >>>kernel source, and you should be inside the newly-downloaded v4l-dvb >>>tree after you "cd" into it. I recommend either doing this in your >>>~home directory, or in /usr/src >> >>I built it in /usr/src, seemed to be ok ANAICT. It just didn't work. >>Bear in mind I have no ATSC signals out here in the West Virginia >> hills yet, all ntsc. So I can't as yet test the ATSC side. > >Very interesting... This whole time I thought that your testing was >using a VSB stream. > >So, you're only talking about problems with analog NTSC? > Correct. And there is one difference between the modprobe cx88-dvb that works, and the ones that don't. The ones that do report: kernel: DVB: registering new adapter (cx88[0]). kernel: DVB: registering frontend 0 (Oren OR51132 VSB/QAM Frontend)... echoed on the cli, those that don't work are silent. The complete section from the messages file is: Nov 28 23:25:55 coyote kernel: Linux video capture interface: v1.00 Nov 28 23:25:55 coyote kernel: cx2388x v4l2 driver version 0.0.5 loaded Nov 28 23:25:55 coyote kernel: ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 5 Nov 28 23:25:55 coyote kernel: ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK2] -> GSI 5 (level, low) -> IRQ 5 Nov 28 23:25:55 coyote kernel: CORE cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22,autodetected] Nov 28 23:25:55 coyote kernel: TV tuner 52 at 0x1fe, Radio tuner -1 at 0x1fe Nov 28 23:25:55 coyote kernel: i2c-algo-bit.o: cx88[0] passed test. Nov 28 23:25:55 coyote kernel: tuner 2-0061: chip found @ 0xc2 (cx88[0]) Nov 28 23:25:55 coyote kernel: tuner 2-0061: type set to 52 (Thomson DDT 7610 (ATSC/NTSC)) Nov 28 23:25:55 coyote kernel: cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 5, latency: 32, mmio: 0xea000000 Nov 28 23:25:55 coyote kernel: cx88[0]/0: registered device video0 [v4l2] Nov 28 23:25:55 coyote kernel: cx88[0]/0: registered device vbi0 Nov 28 23:25:55 coyote kernel: cx88[0]/0: registered device radio0 Nov 28 23:25:55 coyote kernel: cx2388x dvb driver version 0.0.5 loaded Nov 28 23:25:55 coyote kernel: ACPI: PCI Interrupt 0000:01:07.2[A] -> Link [LNK2] -> GSI 5 (level, low) -> IRQ 5 Nov 28 23:25:55 coyote kernel: cx88[0]/2: found at 0000:01:07.2, rev: 5, irq: 5, latency: 32, mmio: 0xeb000000 Nov 28 23:25:55 coyote kernel: cx88[0]/2: cx2388x based dvb card Now, from a 2.6.15-rc2-git6 + cvs boot that doesn't work: Nov 28 23:15:24 coyote kernel: Linux video capture interface: v1.00 Nov 28 23:15:24 coyote kernel: cx2388x v4l2 driver version 0.0.5 loaded Nov 28 23:15:24 coyote kernel: ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 5 Nov 28 23:15:24 coyote kernel: ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK2] -> GSI 5 (level, low) -> IRQ 5 Nov 28 23:15:24 coyote kernel: CORE cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22,autodetected] Nov 28 23:15:24 coyote kernel: TV tuner 52 at 0x1fe, Radio tuner -1 at 0x1fe Nov 28 23:15:24 coyote kernel: i2c-algo-bit.o: cx88[0] passed test. Nov 28 23:15:24 coyote kernel: tuner 2-0061: chip found @ 0xc2 (cx88[0]) Nov 28 23:15:24 coyote kernel: tuner 2-0061: type set to 52 (Thomson DDT 7610 (ATSC/NTSC)) Nov 28 23:15:24 coyote kernel: cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 5, latency: 32, mmio: 0xea000000 Nov 28 23:15:24 coyote kernel: cx88[0]/0: registered device video0 [v4l2] Nov 28 23:15:24 coyote kernel: cx88[0]/0: registered device vbi0 Nov 28 23:15:24 coyote kernel: cx88[0]/0: registered device radio0 Nov 28 23:15:25 coyote kernel: cx2388x dvb driver version 0.0.5 loaded Nov 28 23:15:25 coyote kernel: ACPI: PCI Interrupt 0000:01:07.2[A] -> Link [LNK2] -> GSI 5 (level, low) -> IRQ 5 Nov 28 23:15:25 coyote kernel: cx88[0]/2: found at 0000:01:07.2, rev: 5, irq: 5, latency: 32, mmio: 0xeb000000 Nov 28 23:15:25 coyote kernel: cx88[0]/2: cx2388x based dvb card Nov 28 23:15:25 coyote kernel: DVB: registering new adapter (cx88[0]). Nov 28 23:15:25 coyote kernel: DVB: registering frontend 0 (Oren OR51132 VSB/QAM Frontend)... Which *looks* the same to me, but it doesn't work. Those last 2 lines that are normally echoed to the cli, are not with the newer code although they are in the messages log. >It seems that I might be having a similar (but NOT the same) problem >with my FusionHDTV3 Gold-T, but it has nothing to do with the kernel >version. Let me remind you that this card uses Thomson DDT 7611, and >your card uses Thomson DDT 7610. It simply doesnt work anymore, >regardless of whether I am in Linux or Windows, no matter which kernel >version. Only digital ATSC (using QAM256) is working for me. > >I will have to test NTSC using my FusionHDTV5 Gold, installed in my >other box. It doesnt have 2.6.15 installed right now. I will wait for >2.6.15-rc3 to propogate to the kernel.org mirrors before I install it, >so this may take some time. The other card, however, has a TUA6034 >tuner, inside an LG TDVS-H062F ... not the same tuner as you this time, >but still a cx88 board. > >Anyway, after 2.6.15-rc3 propogates and I get it installed, I'll let > you know how my testing goes. Would you do the same? Yes of course. I need to do some housekeeping in my grub.conf though, I'm currently up to 24 entries. :) So stuff before 2.6.14 is about to go away. >Cheers, > >Mike -- Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) 99.36% setiathome rank, not too shabby for a WV hillbilly Yahoo.com and AOL/TW attorneys please note, additions to the above message by Gene Heskett are: Copyright 2005 by Maurice Eugene Heskett, all rights reserved.