From: Jeff Garzik <jgarzik@pobox.com>
To: linux-ide@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, akpm@osdl.org
Subject: libata queue updated
Date: Thu, 1 Dec 2005 05:01:17 -0500 [thread overview]
Message-ID: <20051201100117.GA23762@havoc.gtf.org> (raw)
Here is the current contents of libata-dev.git#ALL, which is
auto-propagated to Andrew Morton's -mm tree.
http://www.kernel.org/pub/linux/kernel/people/jgarzik/patchkits/2.6/2.6.15-rc4-libata1.patch.bz2
A lot of this stuff is the 'pata-drivers' branch, which is available for
testing, but not bound for upstream anytime soon.
Alan Cox:
Add libata CMD/SI680 driver
[libata] Add PATA driver for Compaq Triflex
[libata] Add PATA VIA driver.
[libata] Add driver for PATA AMD/NVIDIA chips.
libata: Update the AMD driver to support the AMD CS5536.
libata: Add enablebits support to the triflex driver
libata: Add enablebits to via driver
[libata] Add new PATA driver pata_opti
libata: AMD pata fixes
libata: Fix opti pci enable bits as with the AMD bug
libata: Fix enable bits for triflex
libata: Clean up and fix the VIA PATA libata driver
Albert Lee:
[libata] add driver for Promise PATA 2027x
libata-dev-2.6: pdc2027x add ata_scsi_ioctl
libata-dev-2.6: pdc2027x change comments
libata-dev-2.6: pdc2027x move the PLL counter reading code
libata-dev-2.6: pdc2027x PLL input clock detection fix
libata-dev: Convert pdc2027x from PIO to MMIO
libata-dev: pdc2027x use "long" for counter data type
libata-dev: pdc2027x ATAPI DMA lost irq problem workaround
libata: interrupt driven pio for libata-core
libata: interrupt driven pio for LLD
libata irq-pio: add comments and cleanup
libata irq-pio: rename atapi_packet_task() and comments
libata irq-pio: simplify if condition in ata_dataout_task()
libata irq-pio: cleanup ata_qc_issue_prot()
libata: move atapi_send_cdb() and ata_dataout_task()
[libata irq-pio] reorganize ata_pio_sector() and __atapi_pio_bytes()
[libata irq-pio] reorganize "buf + offset" in ata_pio_sector()
[libata irq-pio] use PageHighMem() to optimize the kmap_atomic() usage
libata CHS: LBA28/LBA48 optimization (revise #6)
libata irq-pio: misc fixes
libata irq-pio: merge the ata_dataout_task workqueue with ata_pio_task workqueue
libata irq-pio: eliminate unnecessary queuing in ata_pio_first_block()
libata irq-pio: add read/write multiple support
libata: pata_pdc2027x minor fix
Erik Benada:
[libata sata_promise] support PATA ports on SATA controllers
Jeff Garzik:
[libata] pata_pdc2027x: update for recent ->host_stop() API changes
[libata pata_pdc2027x] add documentation ref in header; trim trailing whitespace
[libata irq-pio] build fix
[libata pdc_adma] update for removal of ATA_FLAG_NOINTR
[libata pata_sil680] add to Makefile/Kconfig
libata: Add makefile rules for pata_via driver.
[libata pdc_adma] fix for new irq-driven PIO code
[libata] minor updates to PATA drivers
[libata] constify PCI tables in PATA drivers
[libata] remove two unused fields from struct ata_port
[libata ata_piix] cleanup: remove duplicate ata_port_info records
[libata sata_mv] IRQ PIO build fix
[libata pata_via] fix warning
[libata] Print out SATA speed, if link is up
[libata sata_promise] minor whitespace cleanup
drivers/scsi/Kconfig | 52 ++
drivers/scsi/Makefile | 6
drivers/scsi/ata_piix.c | 40 --
drivers/scsi/libata-core.c | 571 +++++++++++++++++++++-------
drivers/scsi/libata-scsi.c | 48 +-
drivers/scsi/pata_amd.c | 644 ++++++++++++++++++++++++++++++++
drivers/scsi/pata_opti.c | 267 +++++++++++++
drivers/scsi/pata_pdc2027x.c | 855 +++++++++++++++++++++++++++++++++++++++++++
drivers/scsi/pata_sil680.c | 361 ++++++++++++++++++
drivers/scsi/pata_triflex.c | 267 +++++++++++++
drivers/scsi/pata_via.c | 511 +++++++++++++++++++++++++
drivers/scsi/pdc_adma.c | 8
drivers/scsi/sata_mv.c | 8
drivers/scsi/sata_nv.c | 4
drivers/scsi/sata_promise.c | 67 ++-
drivers/scsi/sata_qstor.c | 11
drivers/scsi/sata_sx4.c | 7
drivers/scsi/sata_vsc.c | 6
include/linux/ata.h | 23 +
include/linux/libata.h | 32 -
include/linux/pci_ids.h | 8
21 files changed, 3539 insertions(+), 257 deletions(-)
next reply other threads:[~2005-12-01 10:01 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-01 10:01 Jeff Garzik [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-10-09 15:22 Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20051201100117.GA23762@havoc.gtf.org \
--to=jgarzik@pobox.com \
--cc=akpm@osdl.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®