From: Gene Heskett <gene.heskett@verizon.net>
To: linux-kernel@vger.kernel.org
Cc: Perry Gilfillan <perrye@linuxmail.org>,
Mauro Carvalho Chehab <mchehab@infradead.org>,
Linux and Kernel Video <video4linux-list@redhat.com>,
Don Koch <aardvark@krl.com>,
Michael Krufky - V4L <mkrufky@m1k.net>
Subject: Re: Gene's pcHDTV 3000 analog problem
Date: Thu, 01 Dec 2005 17:26:40 -0500 [thread overview]
Message-ID: <200512011726.41299.gene.heskett@verizon.net> (raw)
In-Reply-To: <438F73E5.5020600@linuxmail.org>
On Thursday 01 December 2005 17:06, Perry Gilfillan wrote:
>Mauro Carvalho Chehab wrote:
>> After checking the datasheets of Thompson tuner, and I have one
>> guess:
>>
>> At board description, tda9887 is not there. This tuner needs to work
>>properly.
>>
>> This small patch does enable it for your board.
>>
>> You should notice that you may need to use some parameters for
>> tda0887 to work properly, like using port1=0 port2=0 qss=0 as insmod
>> options for this module. (these are some on/off bits at the chip, to
>> enable some special functions - if 0/0/0 doesn't work you may need to
>> test 0/0/1, .. 1/1/1).
>
>This has fixed it for me!! I compiled todays cvs, with out this patch,
>to watch it fail, then added the line as noted, and reloaded the
> modules without rebooting, and it worked. I did a cold start to see
> that it is repeatable, and it continues to work. I used no extra
> parameters, so the defaults are working fine.
I haven't built it yet, had to apply the patch by hand for some reason
here, after doing a cvs up -D today.
2.6.15-rc4 under construction to test it.
>
>Cheers,
>
>Perry
>
>>Cheers,
>>Mauro.
>>
>>
>>----------------------------------------------------------------------
>>--
>>
>>Index: linux/drivers/media/video/cx88/cx88-cards.c
>>===================================================================
>>RCS file:
>> /cvs/video4linux/v4l-dvb/linux/drivers/media/video/cx88/cx88-cards.c,
>>v retrieving revision 1.108
>>diff -u -p -r1.108 cx88-cards.c
>>--- linux/drivers/media/video/cx88/cx88-cards.c 25 Nov 2005 10:24:13
>> -0000 1.108 +++ linux/drivers/media/video/cx88/cx88-cards.c 1 Dec
>> 2005 20:56:43 -0000 @@ -569,6 +569,7 @@ struct cx88_board
>> cx88_boards[] = {
>> .radio_type = UNSET,
>> .tuner_addr = ADDR_UNSET,
>> .radio_addr = ADDR_UNSET,
>>+ .tda9887_conf = TDA9887_PRESENT,
>> .input = {{
>> .type = CX88_VMUX_TELEVISION,
>> .vmux = 0,
--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
99.36% setiathome rank, not too shabby for a WV hillbilly
Yahoo.com and AOL/TW attorneys please note, additions to the above
message by Gene Heskett are:
Copyright 2005 by Maurice Eugene Heskett, all rights reserved.
next prev parent reply other threads:[~2005-12-01 22:28 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200511282205.jASM5YUI018061@p-chan.krl.com>
[not found] ` <200511282248.jASMm1PC029740@p-chan.krl.com>
[not found] ` <438B8C5A.7070002@m1k.net>
[not found] ` <200511281835.56805.gene.heskett@verizon.net>
2005-11-29 1:17 ` cx88 totally fried in 2.6.15-rcX -was- Re: HD3000 - no NTSC via tuner Michael Krufky
2005-11-29 2:25 ` Gene Heskett
2005-11-29 3:37 ` Michael Krufky
2005-11-29 3:43 ` Michael Krufky
2005-11-29 4:40 ` Gene Heskett
2005-11-29 4:56 ` Michael Krufky
2005-11-29 7:13 ` Michael Krufky
2005-11-29 15:11 ` Gene Heskett
2005-11-29 15:52 ` Michael Krufky
2005-11-29 16:06 ` Gene Heskett
2005-11-29 17:06 ` Gene Heskett
2005-11-29 4:23 ` Gene Heskett
[not found] ` <200511291335.18431.gene.heskett@verizon.net>
[not found] ` <438CA1E3.7010101@m1k.net>
[not found] ` <200511291546.27365.gene.heskett@verizon.net>
2005-11-29 21:29 ` Gene's pcHDTV 3000 analog problem Michael Krufky
[not found] ` <c35b44d70511291435i5f07bc88g429276ef659c28c5@mail.gmail.com>
2005-11-29 23:01 ` Michael Krufky
2005-11-29 23:43 ` Don Koch
2005-11-29 23:52 ` Don Koch
[not found] ` <c35b44d70511291548lcb10361ifd3a4ea0f239662d@mail.gmail.com>
2005-11-30 1:26 ` Michael Krufky
2005-11-30 5:07 ` Gene Heskett
2005-11-30 5:29 ` Michael Krufky
2005-11-30 15:53 ` Don Koch
2005-12-01 0:24 ` Gene Heskett
2005-12-01 4:09 ` Michael Krufky
[not found] ` <438E7107.3000407@linuxmail.org>
[not found] ` <438E8365.4020200@linuxmail.org>
[not found] ` <438E84A4.8000601@m1k.net>
[not found] ` <438E8A58.4010003@linuxmail.org>
[not found] ` <438EBD43.3080400@linuxmail.org>
2005-12-01 17:54 ` Michael Krufky
2005-12-01 21:00 ` Mauro Carvalho Chehab
2005-12-01 22:06 ` Perry Gilfillan
2005-12-01 22:23 ` Michael Krufky
2005-12-01 22:26 ` Gene Heskett [this message]
2005-12-01 22:45 ` Michael Krufky
2005-12-02 0:03 ` Gene Heskett
[not found] ` <1133486311.2969.11.camel@frolic>
2005-12-02 4:01 ` Gene Heskett
2005-12-01 22:14 ` Gene Heskett
2005-12-02 0:07 ` Don Koch
2005-12-01 3:20 ` Don Koch
2005-12-01 4:00 ` Michael Krufky
2005-12-01 14:59 ` Gene Heskett
2005-12-01 15:40 ` Perry Gilfillan
2005-12-01 17:01 ` Gene Heskett
2005-12-01 15:24 ` Gene Heskett
2005-12-01 15:38 ` Michael Krufky
2005-12-01 17:13 ` Gene Heskett
2005-12-01 15:30 ` Gene Heskett
2005-11-30 4:06 ` Gene Heskett
2005-11-30 12:59 ` Mauro Carvalho Chehab
2005-11-30 13:01 ` Mauro Carvalho Chehab
2005-12-01 0:28 ` Gene Heskett
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200512011726.41299.gene.heskett@verizon.net \
--to=gene.heskett@verizon.net \
--cc=aardvark@krl.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mchehab@infradead.org \
--cc=mkrufky@m1k.net \
--cc=perrye@linuxmail.org \
--cc=video4linux-list@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®