Re: 2.6.15-rc5-mm1 (x86_64-hpet-overflow.patch breaks resume from disk)

["Rafael J. Wysocki" <rjw@sisk.pl>]

Update:

On Wednesday, 7 December 2005 01:46, Rafael J. Wysocki wrote:
> Hi,
> 
> On Monday, 5 December 2005 08:21, Andrew Morton wrote:
> > 
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.15-rc5/2.6.15-rc5-mm1/
> 
> }-- snip --{
> > +x86_64-hpet-overflow.patch
> 
> This patch breaks resume from disk badly.  The box hangs solid as soon as interrupts
> are reenabled during resume (right after the image has been read).

I've just managed to get a call trace from it, which is appended.

Greetings,
Rafael


swsusp: Reading resume file was successful
PM: Preparing devices for restore.
Suspending device 1.0
Suspending device ide1
Suspending device 0.1
Suspending device ide0
Suspending device serial8250
Suspending device serio4
Suspending device serio3
Suspending device serio2
Suspending device serio1
Suspending device serio0
Suspending device i8042
Suspending device vesafb.0
Suspending device 0000:01:00.0
Suspending device 0000:02:02.0
Suspending device 0000:02:01.4
Suspending device 0000:02:01.3
Suspending device 0000:02:01.2
Suspending device 0000:02:01.1
Suspending device 0000:02:01.0
Suspending device 0000:02:00.0
Suspending device 0000:00:18.3
Suspending device 0000:00:18.2
Suspending device 0000:00:18.1
Suspending device 0000:00:18.0
Suspending device 0000:00:0b.0
Suspending device 0000:00:0a.0
Suspending device 0000:00:08.0
Suspending device 0000:00:06.0
Suspending device 0000:00:02.2
Suspending device 0000:00:02.1
Suspending device 0000:00:02.0
Suspending device 0000:00:01.1
Suspending device 0000:00:01.0
Suspending device 0000:00:00.0
Suspending device pci0000:00
Suspending device platform
PM: Restoring saved image.
NMI Watchdog detected LOCKUP on CPU 0
CPU 0
Modules linked in: usbserial thermal processor fan button battery ac snd_pcm_oss snd_mixer_oss snd_intel8x0 snd_ac97_codec snd_ac97_bus snd_
pcm snd_timer snd soundcore snd_page_alloc af_packet pcmcia firmware_class yenta_socket rsrc_nonstatic pcmcia_core evdev joydev sg usbhid st
 sr_mod ehci_hcd ohci_hcd sk98lin sd_mod scsi_mod ide_cd cdrom dm_mod parport_pc lp parport
Pid: 3304, comm: bash Not tainted 2.6.15-rc5-mm1 #1
RIP: 0010:[<ffffffff8013c87d>] <ffffffff8013c87d>{do_timer+77}
RSP: 0018:ffffffff80481eb8  EFLAGS: 00000002
RAX: 000000001d0f8788 RBX: 00000255e7679aa8 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 00000000003d09fa RDI: 0000000000000000
RBP: ffffffff80481ed8 R08: 0000000000000040 R09: 00000000ffffffff
R10: 0000000094fc4b38 R11: 00000000c0010008 R12: 000002560cbc37bc
R13: ffff81002bd63d38 R14: ffff81002bd63d38 R15: 0000000000000000
FS:  00002aaaab28fe80(0000) GS:ffffffff8050f000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00002aaaaaac2000 CR3: 000000002ad20000 CR4: 00000000000006e0
Process bash (pid: 3304, threadinfo ffff81002bd62000, task ffff810001fdb790)
Stack: 0000000000000fed 00000000000002b7 0000000000000b18 000002560cbc37bb
       ffffffff80481f08 ffffffff80112dd1 ffffffff803d39c0 0000000000000000
       ffff81002bd63d38 0000000000000000
Call Trace: <IRQ> <ffffffff80112dd1>{timer_interrupt+689} <ffffffff8015ae83>{handle_IRQ_event+51}
       <ffffffff8015af72>{__do_IRQ+162} <ffffffff80111097>{do_IRQ+55}
       <ffffffff8010f0b0>{ret_from_intr+0}  <EOI> <ffffffff8011ae3d>{enable_lapic_nmi_watchdog+29}
       <ffffffff8011ae63>{lapic_nmi_resume+19} <ffffffff8015296d>{swsusp_suspend+93}
       <ffffffff8015296a>{swsusp_suspend+90} <ffffffff801537b8>{pm_suspend_disk+88}
       <ffffffff80151266>{enter_state+118} <ffffffff801514a7>{state_store+119}
       <ffffffff801c09a4>{subsys_attr_store+36} <ffffffff801c0e2a>{sysfs_write_file+202}
       <ffffffff80180549>{vfs_write+233} <ffffffff801806f0>{sys_write+80}
       <ffffffff8010eb0e>{system_call+126}

Code: 48 ff cb 48 85 c9 48 89 ce 74 25 8b 05 de 38 2a 00 48 63 d0
console shuts up ...
 <7>APIC error on CPU0: 00(00)
Kernel panic - not syncing: Aiee, killing interrupt handler!