From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S964824AbVLMKcW (ORCPT ); Tue, 13 Dec 2005 05:32:22 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932614AbVLMKcW (ORCPT ); Tue, 13 Dec 2005 05:32:22 -0500 Received: from mtaout3.012.net.il ([84.95.2.7]:55105 "EHLO mtaout3.012.net.il") by vger.kernel.org with ESMTP id S932613AbVLMKcU (ORCPT ); Tue, 13 Dec 2005 05:32:20 -0500 Date: Tue, 13 Dec 2005 12:31:56 +0200 From: Muli Ben-Yehuda Subject: 2.6.15-rc5-mm2 does not boot on AMD64 with sata_sil To: Linux-Kernel Cc: Jon Mason , muli@il.ibm.com Message-id: <20051213103156.GD23695@granada.merseine.nu> MIME-version: 1.0 Content-type: multipart/mixed; boundary="Boundary_(ID_JxxtcQBIRCpgXZJnBqA4/Q)" Content-disposition: inline User-Agent: Mutt/1.5.11 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org --Boundary_(ID_JxxtcQBIRCpgXZJnBqA4/Q) Content-type: text/plain; charset=us-ascii Content-transfer-encoding: 7BIT Content-disposition: inline My dual AMD64 no longer boots with 2.6.15-rc5-mm2 because it can't find its disks. 2.6.15-rc5-gitX works fine. Boot logs and lscpi attached. Interesting parts of the diff between vanillalog and mmlog (trying pci=routeirq and pci=noacpi didn't help): @@ -84,6 +87,11 @@ usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report +PCI: Cannot allocate resource region 0 of device 0000:01:02.0 +PCI: Cannot allocate resource region 1 of device 0000:01:02.0 +PCI: Cannot allocate resource region 2 of device 0000:01:02.0 +PCI: Cannot allocate resource region 3 of device 0000:01:02.0 +PCI: Cannot allocate resource region 4 of device 0000:01:02.0 agpgart: Detected AMD 8151 AGP Bridge rev B3 agpgart: AGP aperture is 256M @ 0xe0000000 PCI-DMA: Disabling IOMMU. @@ -164,28 +175,21 @@ Uniform CD-ROM driver Revision: 3.20 GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 17 (level, low) -> IRQ 177 -ata1: SATA max UDMA/100 cmd 0xFFFFC20000006080 ctl 0xFFFFC2000000608A bmdma 0x7ata2: SATA max UDMA/100 cmd 0xFFFFC200000060C0 ctl 0xFFFFC200000060CA bmdma 0x7ata1: no device found (phy stat 00000000) +ata1: SATA max UDMA/100 cmd 0xFFFFC20000006080 ctl 0xFFFFC2000000608A bmdma 0x7ata2: SATA max UDMA/100 cmd 0xFFFFC200000060C0 ctl 0xFFFFC200000060CA bmdma 0x7ata1: SATA link down (SStatus 0) scsi0 : sata_sil -ata2: dev 0 ATA-7, max UDMA/133, 156312576 sectors: LBA -ata2: dev 0 configured for UDMA/100 +ata2: SATA link up 1.5 Gbps (SStatus 113) +ata2: dev 0 not supported, ignoring scsi1 : sata_sil - Vendor: ATA Model: Maxtor 6Y080M0 Rev: YAR5 - Type: Direct-Access ANSI SCSI revision: 05 -SCSI device sda: 156312576 512-byte hdwr sectors (80032 MB) -SCSI device sda: drive cache: write back -SCSI device sda: 156312576 512-byte hdwr sectors (80032 MB) -SCSI device sda: drive cache: write back - sda: sda1 sda2 -sd 1:0:0:0: Attached scsi disk sda -Fusion MPT base driver 3.03.04 +Fusion MPT base driver 3.03.05 Copyright (c) 1999-2005 LSI Logic Corporation -Fusion MPT SPI Host driver 3.03.04 +Fusion MPT SPI Host driver 3.03.05 GSI 18 sharing vector 0xB9 and IRQ 18 ACPI: PCI Interrupt 0000:01:03.2[C] -> GSI 16 (level, low) -> IRQ 185 ehci_hcd 0000:01:03.2: EHCI Host Controller ehci_hcd 0000:01:03.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:01:03.2: irq 185, io mem 0xf9550000 ehci_hcd 0000:01:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 +usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected GSI 19 sharing vector 0xC1 and IRQ 19 Cheers, Muli -- Muli Ben-Yehuda http://www.mulix.org | http://mulix.livejournal.com/ --Boundary_(ID_JxxtcQBIRCpgXZJnBqA4/Q) Content-type: text/plain; NAME=mmlog; charset=us-ascii Content-transfer-encoding: 7BIT Content-disposition: attachment; filename=mmlog ;; welcome, muli, to the one true editor! Bootdata ok (command line is root=/dev/sda2 selinux=0 console=ttyS1,19200n8) Linux version 2.6.15-rc5-mm2 (muli@rhun) (gcc version 3.4.1) #3 SMP Tue Dec 135BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dff60000 (usable) BIOS-e820: 00000000dff60000 - 00000000dff72000 (ACPI data) BIOS-e820: 00000000dff72000 - 00000000dff80000 (ACPI NVS) BIOS-e820: 00000000dff80000 - 00000000e0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 1 -> APIC 1 -> Node 1 SRAT: Node 0 PXM 0 0-a0000 SRAT: Node 0 PXM 0 0-e0000000 Bootmem setup node 0 0000000000000000-00000000dff60000 ACPI: PM-Timer IO Port: 0x8008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:5 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:5 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xf9220000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 17, address 0xf9220000, GSI 24-27 ACPI: IOAPIC (id[0x04] address[0xf9230000] gsi_base[28]) IOAPIC[2]: apic_id 4, version 17, address 0xf9230000, GSI 28-31 ACPI: IOAPIC (id[0x05] address[0xf9200000] gsi_base[32]) IOAPIC[3]: apic_id 5, version 17, address 0xf9200000, GSI 32-35 ACPI: IOAPIC (id[0x06] address[0xf9210000] gsi_base[36]) IOAPIC[4]: apic_id 6, version 17, address 0xf9210000, GSI 36-39 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) Setting APIC routing to flat DMI present. Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000) Checking aperture... CPU 0: aperture @ e0000000 size 256 MB CPU 1: aperture @ e0000000 size 256 MB Built 1 zonelists Initializing CPU#0 Kernel command line: root=/dev/sda2 selinux=0 console=ttyS1,19200n8 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 2393.242 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Memory: 3606672k/3669376k available (3311k kernel code, 62308k reserved, 1441k)Calibrating delay using timer specific routine.. 4796.16 BogoMIPS (lpj=9592329)Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0(1) -> Node 0 -> Core 0 mtrr: v2.0 (20020519) Using local APIC timer interrupts. Detected 12.464 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4786.72 BogoMIPS (lpj=9573445)CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1(1) -> Node 0 -> Core 0 AMD Opteron(tm) Processor 250 stepping 0a CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff -20 cycles, maxerr 1228 cycles) Brought up 2 CPUs Disabling vsyscall due to use of PM timer time.c: Using PM based timekeeping. testing NMI watchdog ... CPU#1: NMI appears to be stuck (19->19)! migration_cost=866 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Subsystem revision 20050916 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *5 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 10 11) *9 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11) ACPI: PCI Root Bridge [PCI1] (0000:08) SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 0 of device 0000:01:02.0 PCI: Cannot allocate resource region 1 of device 0000:01:02.0 PCI: Cannot allocate resource region 2 of device 0000:01:02.0 PCI: Cannot allocate resource region 3 of device 0000:01:02.0 PCI: Cannot allocate resource region 4 of device 0000:01:02.0 agpgart: Detected AMD 8151 AGP Bridge rev B3 agpgart: AGP aperture is 256M @ 0xe0000000 PCI-DMA: Disabling IOMMU. PCI: Bridge: 0000:00:06.0 IO window: 2000-2fff MEM window: f9500000-f95fffff PREFETCH window: f9000000-f90fffff PCI: Bridge: 0000:00:0a.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: f9600000-f96fffff PREFETCH window: disabled. PCI: Failed to allocate mem resource #6:20000@f8000000 for 0000:09:00.0 PCI: Bridge: 0000:08:01.0 IO window: disabled. MEM window: f8000000-f8ffffff PREFETCH window: f0000000-f7ffffff PCI: Bridge: 0000:08:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:08:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). io scheduler noop registered io scheduler deadline registered io scheduler cfq registered PCI: MSI quirk detected. pci_msi_quirk set. PCI: MSI quirk detected. pci_msi_quirk set. PCI: MSI quirk detected. pci_msi_quirk set. PCI: MSI quirk detected. pci_msi_quirk set. ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (FF) [SLPF] ACPI: Power Button (CM) [PWRB] Real Time Clock Driver v1.12 hw_random: AMD768 system management I/O registers at 0x8000. hw_random hardware driver 1.0.0 loaded Linux agpgart interface v0.101 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A mice: PS/2 mouse device common for all mice FDC 0 is a National Semiconductor PC87306 input: AT Translated Set 2 keyboard as /class/input/input0 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 6.1.16-k2 Copyright (c) 1999-2005 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI e100: Copyright(c) 1999-2005 Intel Corporation tg3.c:v3.44 (Dec 6, 2005) GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 28 (level, low) -> IRQ 169 eth0: Tigon3 [partno(none) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/100100:0d:60:53:1f:cf eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[769f4000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.47. tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD8111: IDE controller at PCI slot 0000:00:07.1 AMD8111: chipset revision 3 AMD8111: not 100% native mode: will probe irqs later AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:DMA, hdd:pio hdc: LITE-ON LTR-48327S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 17 (level, low) -> IRQ 177 ata1: SATA max UDMA/100 cmd 0xFFFFC20000006080 ctl 0xFFFFC2000000608A bmdma 0x7ata2: SATA max UDMA/100 cmd 0xFFFFC200000060C0 ctl 0xFFFFC200000060CA bmdma 0x7ata1: SATA link down (SStatus 0) scsi0 : sata_sil ata2: SATA link up 1.5 Gbps (SStatus 113) ata2: dev 0 not supported, ignoring scsi1 : sata_sil Fusion MPT base driver 3.03.05 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SPI Host driver 3.03.05 GSI 18 sharing vector 0xB9 and IRQ 18 ACPI: PCI Interrupt 0000:01:03.2[C] -> GSI 16 (level, low) -> IRQ 185 ehci_hcd 0000:01:03.2: EHCI Host Controller ehci_hcd 0000:01:03.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:01:03.2: irq 185, io mem 0xf9550000 ehci_hcd 0000:01:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected GSI 19 sharing vector 0xC1 and IRQ 19 ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 18 (level, low) -> IRQ 193 ohci_hcd 0000:01:03.0: OHCI Host Controller ohci_hcd 0000:01:03.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:01:03.0: irq 193, io mem 0xf9530000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected GSI 20 sharing vector 0xC9 and IRQ 20 ACPI: PCI Interrupt 0000:01:03.1[B] -> GSI 19 (level, low) -> IRQ 201 ohci_hcd 0000:01:03.1: OHCI Host Controller ohci_hcd 0000:01:03.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:01:03.1: irq 201, io mem 0xf9540000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected USB Universal Host Controller Interface driver v2.3 usbcore: registered new driver usblp /home/muli/w/iommu/dma_ops/mm/drivers/usb/class/usblp.c: v0.13: USB Printer DerInitializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid /home/muli/w/iommu/dma_ops/mm/drivers/usb/input/hid-core.c: v2.6:USB HID core rdevice-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com Intel 810 + AC97 Audio, version 1.01, 11:43:14 Dec 13 2005 ACPI: PCI Interrupt 0000:00:07.5[B] -> GSI 17 (level, low) -> IRQ 177 i810: AMD-8111 IOHub found at IO 0x1400 and 0x1000, MEM 0x0000 and 0x0000, IRQ7i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 ac97_codec: AC97 codec, id: ALG96 (Unknown) i810_audio: only 48Khz playback available. i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present),2oprofile: using NMI interrupt. NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.60.0) powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: MP systems not supported by PSB BIOS structure Root-NFS: No NFS server available, giving up. VFS: Unable to mount root fs via NFS, trying floppy. VFS: Insert root floppy and press ENTER --Boundary_(ID_JxxtcQBIRCpgXZJnBqA4/Q) Content-type: text/plain; NAME=vanillallog; charset=us-ascii Content-transfer-encoding: 7BIT Content-disposition: attachment; filename=vanillallog Bootdata ok (command line is root=/dev/sda2 selinux=0 console=ttyS1,19200n8) Linux version 2.6.15-rc5 (muli@rhun) (gcc version 3.4.1) #1 SMP Tue Dec 13 11:5BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dff60000 (usable) BIOS-e820: 00000000dff60000 - 00000000dff72000 (ACPI data) BIOS-e820: 00000000dff72000 - 00000000dff80000 (ACPI NVS) BIOS-e820: 00000000dff80000 - 00000000e0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 1 -> APIC 1 -> Node 1 SRAT: Node 0 PXM 0 0-a0000 SRAT: Node 0 PXM 0 0-e0000000 Bootmem setup node 0 0000000000000000-00000000dff60000 ACPI: PM-Timer IO Port: 0x8008 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:5 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:5 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xf9220000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 17, address 0xf9220000, GSI 24-27 ACPI: IOAPIC (id[0x04] address[0xf9230000] gsi_base[28]) IOAPIC[2]: apic_id 4, version 17, address 0xf9230000, GSI 28-31 ACPI: IOAPIC (id[0x05] address[0xf9200000] gsi_base[32]) IOAPIC[3]: apic_id 5, version 17, address 0xf9200000, GSI 32-35 ACPI: IOAPIC (id[0x06] address[0xf9210000] gsi_base[36]) IOAPIC[4]: apic_id 6, version 17, address 0xf9210000, GSI 36-39 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000) Checking aperture... CPU 0: aperture @ e0000000 size 256 MB CPU 1: aperture @ e0000000 size 256 MB Built 1 zonelists Kernel command line: root=/dev/sda2 selinux=0 console=ttyS1,19200n8 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 2393.249 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Memory: 3606736k/3669376k available (3220k kernel code, 62244k reserved, 1400k)Calibrating delay using timer specific routine.. 4795.95 BogoMIPS (lpj=9591905)Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0(1) -> Node 0 -> Core 0 mtrr: v2.0 (20020519) Using local APIC timer interrupts. Detected 12.464 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4786.72 BogoMIPS (lpj=9573444)CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 1(1) -> Node 0 -> Core 0 AMD Opteron(tm) Processor 250 stepping 0a CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff -9 cycles, maxerr 1225 cycles) Brought up 2 CPUs Disabling vsyscall due to use of PM timer time.c: Using PM based timekeeping. testing NMI watchdog ... OK. NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *5 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 10 11) *9 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11) ACPI: PCI Root Bridge [PCI1] (0000:08) SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report agpgart: Detected AMD 8151 AGP Bridge rev B3 agpgart: AGP aperture is 256M @ 0xe0000000 PCI-DMA: Disabling IOMMU. PCI: Bridge: 0000:00:06.0 IO window: 2000-2fff MEM window: f9500000-f95fffff PREFETCH window: f9000000-f90fffff PCI: Bridge: 0000:00:0a.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: f9600000-f96fffff PREFETCH window: disabled. PCI: Failed to allocate mem resource #6:20000@f8000000 for 0000:09:00.0 PCI: Bridge: 0000:08:01.0 IO window: disabled. MEM window: f8000000-f8ffffff PREFETCH window: f0000000-f7ffffff PCI: Bridge: 0000:08:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:08:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). io scheduler noop registered io scheduler deadline registered io scheduler cfq registered PCI: MSI quirk detected. pci_msi_quirk set. PCI: MSI quirk detected. pci_msi_quirk set. PCI: MSI quirk detected. pci_msi_quirk set. PCI: MSI quirk detected. pci_msi_quirk set. ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (FF) [SLPF] ACPI: Power Button (CM) [PWRB] Real Time Clock Driver v1.12 hw_random: AMD768 system management I/O registers at 0x8000. hw_random hardware driver 1.0.0 loaded Linux agpgart interface v0.101 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 6.1.16-k2 Copyright (c) 1999-2005 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI e100: Copyright(c) 1999-2005 Intel Corporation tg3.c:v3.44 (Dec 6, 2005) GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 28 (level, low) -> IRQ 169 eth0: Tigon3 [partno(none) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/100feth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[769f4000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.47. tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky netconsole: not configured, aborting Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD8111: IDE controller at PCI slot 0000:00:07.1 AMD8111: chipset revision 3 AMD8111: not 100% native mode: will probe irqs later AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:DMA, hdd:pio hdc: LITE-ON LTR-48327S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 17 (level, low) -> IRQ 177 ata1: SATA max UDMA/100 cmd 0xFFFFC20000006080 ctl 0xFFFFC2000000608A bmdma 0x7ata2: SATA max UDMA/100 cmd 0xFFFFC200000060C0 ctl 0xFFFFC200000060CA bmdma 0x7ata1: no device found (phy stat 00000000) scsi0 : sata_sil ata2: dev 0 ATA-7, max UDMA/133, 156312576 sectors: LBA ata2: dev 0 configured for UDMA/100 scsi1 : sata_sil Vendor: ATA Model: Maxtor 6Y080M0 Rev: YAR5 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156312576 512-byte hdwr sectors (80032 MB) SCSI device sda: drive cache: write back SCSI device sda: 156312576 512-byte hdwr sectors (80032 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sd 1:0:0:0: Attached scsi disk sda Fusion MPT base driver 3.03.04 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SPI Host driver 3.03.04 GSI 18 sharing vector 0xB9 and IRQ 18 ACPI: PCI Interrupt 0000:01:03.2[C] -> GSI 16 (level, low) -> IRQ 185 ehci_hcd 0000:01:03.2: EHCI Host Controller ehci_hcd 0000:01:03.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:01:03.2: irq 185, io mem 0xf9550000 ehci_hcd 0000:01:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected GSI 19 sharing vector 0xC1 and IRQ 19 ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 18 (level, low) -> IRQ 193 ohci_hcd 0000:01:03.0: OHCI Host Controller ohci_hcd 0000:01:03.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:01:03.0: irq 193, io mem 0xf9530000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected GSI 20 sharing vector 0xC9 and IRQ 20 ACPI: PCI Interrupt 0000:01:03.1[B] -> GSI 19 (level, low) -> IRQ 201 ohci_hcd 0000:01:03.1: OHCI Host Controller ohci_hcd 0000:01:03.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:01:03.1: irq 201, io mem 0xf9540000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected USB Universal Host Controller Interface driver v2.3 usbcore: registered new driver usblp /home/muli/kernel/hg/drivers/usb/class/usblp.c: v0.13: USB Printer Device ClasrInitializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid /home/muli/kernel/hg/drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com input: AT Translated Set 2 keyboard as /class/input/input0 Intel 810 + AC97 Audio, version 1.01, 11:24:59 Dec 13 2005 ACPI: PCI Interrupt 0000:00:07.5[B] -> GSI 17 (level, low) -> IRQ 177 i810: AMD-8111 IOHub found at IO 0x1400 and 0x1000, MEM 0x0000 and 0x0000, IRQ7input: PS/2 Generic Mouse as /class/input/input1 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 ac97_codec: AC97 codec, id: ALG96 (Unknown) i810_audio: only 48Khz playback available. i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present),2oprofile: using NMI interrupt. NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.50.4) powernow-k8: MP systems not supported by PSB BIOS structure powernow-k8: MP systems not supported by PSB BIOS structure ReiserFS: sda2: found reiserfs format "3.6" with standard journal --Boundary_(ID_JxxtcQBIRCpgXZJnBqA4/Q) Content-type: text/plain; NAME=lspci; charset=us-ascii Content-transfer-encoding: 7BIT Content-disposition: attachment; filename=lspci 0000:00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset- FastB2B- Capabilities: [c0] #08 [0086] Capabilities: [f0] #08 [8000] 00: 22 10 60 74 17 00 30 02 07 00 04 06 00 40 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 45 20 20 00 02 20: 50 f9 50 f9 f0 ff 00 00 00 00 00 00 14 10 b7 02 30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 00 06 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 04 06 00 00 00 00 00 00 00 00 00 00 00 00 70: 14 10 b7 02 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 08 f0 86 00 20 00 00 00 d0 00 00 00 22 00 01 00 d0: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 0d 00 00 00 0d 00 00 00 18 00 00 00 00 00 f0: 08 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 0000:00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05) Subsystem: IBM: Unknown device 02b7 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- FastB2B- Capabilities: [a0] Capabilities: [b8] #08 [8000] Capabilities: [c0] #08 [004a] 00: 22 10 50 74 17 01 30 02 12 00 04 06 00 40 81 00 10: 00 00 00 00 00 00 00 00 00 02 02 40 f1 01 20 02 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 a0 00 00 00 00 00 00 00 ff 00 07 00 40: 04 00 1f 00 01 00 00 00 02 0d 00 00 01 2c 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 07 b8 c3 00 50 00 03 00 0e 00 ff ff 02 00 ff ff b0: 00 00 00 00 00 00 00 00 08 c0 00 80 00 00 00 03 c0: 08 00 4a 00 20 00 11 11 20 00 00 00 22 04 35 00 d0: 02 00 35 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 11 00 00 00 12 00 00 00 14 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:00:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) (prog-if 10 [IO-APIC]) Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Reset- FastB2B- Capabilities: [a0] Capabilities: [b8] #08 [8000] 00: 22 10 50 74 17 01 30 02 12 00 04 06 00 40 81 00 10: 00 00 00 00 00 00 00 00 00 03 03 40 f1 01 20 02 20: 60 f9 60 f9 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 a0 00 00 00 00 00 00 00 ff 00 07 00 40: 04 00 1f 00 01 00 00 00 00 00 00 00 01 2c 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 07 b8 83 00 58 00 03 00 0e 00 ff ff 02 00 ff ff b0: 00 00 00 00 00 00 00 00 08 00 00 80 00 00 00 04 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:00:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) (prog-if 10 [IO-APIC]) Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Capabilities: [c0] #08 [0060] 00: 22 10 54 74 02 00 10 02 14 00 00 06 00 00 00 00 10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 14 10 b7 02 30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 0b 00 19 00 0b 00 19 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 02 c0 30 00 3b 0b 00 1f 00 02 00 00 00 00 00 00 b0: 00 01 00 00 00 0f 01 00 00 00 00 00 00 00 00 00 c0: 08 00 60 00 20 00 11 11 20 00 00 00 22 05 35 00 d0: 02 02 35 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 08 08 0d 00 08 08 0e 00 0f 0f 15 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:08:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8151 AGP Bridge (rev 14) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset- FastB2B- 00: 22 10 55 74 07 00 20 02 14 00 04 06 00 63 01 00 10: 00 00 00 00 00 00 00 00 08 09 0d 44 f1 01 20 22 20: 00 f8 f0 f8 00 f0 f0 f7 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 0c 00 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:08:03.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset- FastB2B- Capabilities: [a0] Capabilities: [b8] #08 [8000] Capabilities: [c0] #08 [0043] 00: 22 10 50 74 17 01 30 02 12 00 04 06 00 40 81 00 10: 00 00 00 00 00 00 00 00 08 0e 12 40 f1 01 20 22 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 a0 00 00 00 00 00 00 00 ff 00 07 00 40: 04 00 1f 00 01 00 00 00 02 0b 00 00 01 2c 00 00 50: 00 00 03 00 00 00 05 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 07 b8 83 00 18 08 03 00 0e 00 ff ff 02 00 ff ff b0: 00 00 00 00 00 00 00 00 08 c0 00 80 00 00 00 05 c0: 08 00 43 00 20 00 11 00 d0 00 00 77 22 02 35 00 d0: 02 00 35 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 0f 00 00 00 0d 00 00 00 15 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:08:03.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) (prog-if 10 [IO-APIC]) Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Reset- FastB2B- Capabilities: [a0] Capabilities: [b8] #08 [8000] 00: 22 10 50 74 17 01 30 02 12 00 04 06 00 40 81 00 10: 00 00 00 00 00 00 00 00 08 13 17 40 f1 01 20 22 20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 a0 00 00 00 00 00 00 00 ff 00 07 00 40: 04 00 1f 00 01 00 00 00 00 00 00 00 01 2c 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 07 b8 83 00 20 08 03 00 0e 00 ff ff 02 00 ff ff b0: 00 00 00 00 00 00 00 00 08 00 00 80 00 00 00 06 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000:08:04.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) (prog-if 10 [IO-APIC]) Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- 00: de 10 4e 03 07 00 b0 02 a1 00 00 03 00 40 00 00 10: 00 00 00 f8 08 00 00 f0 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 de 10 da 01 30: 00 00 00 00 60 00 00 00 00 00 00 00 05 01 05 01 40: de 10 da 01 02 00 30 00 1b 0e 00 1f 00 00 00 00 50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00 60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 --Boundary_(ID_JxxtcQBIRCpgXZJnBqA4/Q)--