From: Jeff Garzik <jgarzik@pobox.com>
To: Andrew Morton <akpm@osdl.org>, Linus Torvalds <torvalds@osdl.org>
Cc: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [git patch] libata ATAPI fix
Date: Tue, 13 Dec 2005 11:39:19 -0500 [thread overview]
Message-ID: <20051213163919.GA23659@havoc.gtf.org> (raw)
Please pull from 'upstream-fixes' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
to receive the following updates:
drivers/scsi/libata-scsi.c | 7 +++++--
drivers/scsi/sata_mv.c | 3 ++-
drivers/scsi/sata_promise.c | 12 ++++++------
drivers/scsi/sata_sx4.c | 3 ++-
include/linux/libata.h | 1 +
5 files changed, 16 insertions(+), 10 deletions(-)
Jeff Garzik:
[libata] mark certain hardware (or drivers) with a no-atapi flag
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 379e870..72ddba9 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -2173,9 +2173,12 @@ ata_scsi_find_dev(struct ata_port *ap, c
if (unlikely(!ata_dev_present(dev)))
return NULL;
- if (!atapi_enabled) {
- if (unlikely(dev->class == ATA_DEV_ATAPI))
+ if (!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) {
+ if (unlikely(dev->class == ATA_DEV_ATAPI)) {
+ printk(KERN_WARNING "ata%u(%u): WARNING: ATAPI is %s, device ignored.\n",
+ ap->id, dev->devno, atapi_enabled ? "not supported with this driver" : "disabled");
return NULL;
+ }
}
return dev;
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index ab7432a..9321cdf 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -86,7 +86,8 @@ enum {
MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */
MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */
MV_COMMON_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO),
+ ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
+ ATA_FLAG_NO_ATAPI),
MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE,
CRQB_FLAG_READ = (1 << 0),
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index 8a8e3e3..2691625 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -70,6 +70,9 @@ enum {
PDC_HAS_PATA = (1 << 1), /* PDC20375 has PATA */
PDC_RESET = (1 << 11), /* HDMA reset */
+
+ PDC_COMMON_FLAGS = ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST |
+ ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI,
};
@@ -162,8 +165,7 @@ static struct ata_port_info pdc_port_inf
/* board_2037x */
{
.sht = &pdc_ata_sht,
- .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SRST | ATA_FLAG_MMIO,
+ .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
@@ -173,8 +175,7 @@ static struct ata_port_info pdc_port_inf
/* board_20319 */
{
.sht = &pdc_ata_sht,
- .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SRST | ATA_FLAG_MMIO,
+ .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
@@ -184,8 +185,7 @@ static struct ata_port_info pdc_port_inf
/* board_20619 */
{
.sht = &pdc_ata_sht,
- .host_flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SRST |
- ATA_FLAG_MMIO | ATA_FLAG_SLAVE_POSS,
+ .host_flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
index dcc3ad9..ac7b0d8 100644
--- a/drivers/scsi/sata_sx4.c
+++ b/drivers/scsi/sata_sx4.c
@@ -220,7 +220,8 @@ static struct ata_port_info pdc_port_inf
{
.sht = &pdc_sata_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SRST | ATA_FLAG_MMIO,
+ ATA_FLAG_SRST | ATA_FLAG_MMIO |
+ ATA_FLAG_NO_ATAPI,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index f2dbb68..41ea7db 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -122,6 +122,7 @@ enum {
ATA_FLAG_NOINTR = (1 << 9), /* FIXME: Remove this once
* proper HSM is in place. */
ATA_FLAG_DEBUGMSG = (1 << 10),
+ ATA_FLAG_NO_ATAPI = (1 << 11), /* No ATAPI support */
ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */
ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */
reply other threads:[~2005-12-13 16:39 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20051213163919.GA23659@havoc.gtf.org \
--to=jgarzik@pobox.com \
--cc=akpm@osdl.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®