Sensors errors with 15-rc6, 15-rc5 was normal

[Gene Heskett <gene.heskett@verizon.net>]

To whomever is in charge of the sensors code in the kernel:

I just noted that the temperatures being reported by gkrellm, using its 
internal sensors stuff, are not correct by over 100F too low when -rc6 
is running.  -rc5 seems to give good readings consistent with what 
I've been observing for the last year, a slowly rising cpu reading due 
to the zallman flower becoming dust packed, to the point of about 150F 
for a normal reading.

Today, after rebooting to -rc6, I'm seeing cpu temps ranging between 
39.2 and 41.7 degress F. As the room is probably around 74F, thats a 
bit of a dubious reading.

Whom do I contact about this? 

-- 
Cheers, Gene
People having trouble with vz bouncing email to me should use this
address: <gene.heskett@verizononline.net> which bypasses vz's
stupid bounce rules.  I do use spamassassin too. :-)
Yahoo.com and AOL/TW attorneys please note, additions to the above
message by Gene Heskett are:
Copyright 2005 by Maurice Eugene Heskett, all rights reserved.