From: Roland Dreier <roland@topspin.com>
To: akpm@osdl.org
Cc: linux-kernel@vger.kernel.org, openib-general@openib.org
Subject: [PATCH][6/12] InfiniBand/mthca: pass full process_mad info to firmware
Date: Sun, 23 Jan 2005 22:14:23 -0800 [thread overview]
Message-ID: <20051232214.2ZjgnbDloKBl5KUG@topspin.com> (raw)
In-Reply-To: <20051232214.2iCZjnfrVaRa2RW5@topspin.com>
From: "Michael S. Tsirkin" <mst@mellanox.co.il>
Pass full extended MAD information to firmware when a work completion is supplied to
the MAD_IFC command. This allows B_Key checking/trap generation.
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Roland Dreier <roland@topspin.com>
--- linux-bk.orig/drivers/infiniband/hw/mthca/mthca_cmd.h 2005-01-23 20:39:02.039561320 -0800
+++ linux-bk/drivers/infiniband/hw/mthca/mthca_cmd.h 2005-01-23 20:49:34.829362648 -0800
@@ -280,7 +280,8 @@
void *qp_context, u8 *status);
int mthca_CONF_SPECIAL_QP(struct mthca_dev *dev, int type, u32 qpn,
u8 *status);
-int mthca_MAD_IFC(struct mthca_dev *dev, int ignore_mkey, int port,
+int mthca_MAD_IFC(struct mthca_dev *dev, int ignore_mkey, int ignore_bkey,
+ int port, struct ib_wc* in_wc, struct ib_grh* in_grh,
void *in_mad, void *response_mad, u8 *status);
int mthca_READ_MGM(struct mthca_dev *dev, int index, void *mgm,
u8 *status);
--- linux-bk.orig/drivers/infiniband/hw/mthca/mthca_provider.c 2005-01-23 20:39:02.036561776 -0800
+++ linux-bk/drivers/infiniband/hw/mthca/mthca_provider.c 2005-01-23 20:49:34.826363104 -0800
@@ -59,8 +59,8 @@
in_mad->method = IB_MGMT_METHOD_GET;
in_mad->attr_id = IB_SMP_ATTR_NODE_INFO;
- err = mthca_MAD_IFC(to_mdev(ibdev), 1,
- 1, in_mad, out_mad,
+ err = mthca_MAD_IFC(to_mdev(ibdev), 1, 1,
+ 1, NULL, NULL, in_mad, out_mad,
&status);
if (err)
goto out;
@@ -104,8 +104,8 @@
in_mad->attr_id = IB_SMP_ATTR_PORT_INFO;
in_mad->attr_mod = cpu_to_be32(port);
- err = mthca_MAD_IFC(to_mdev(ibdev), 1,
- port, in_mad, out_mad,
+ err = mthca_MAD_IFC(to_mdev(ibdev), 1, 1,
+ port, NULL, NULL, in_mad, out_mad,
&status);
if (err)
goto out;
@@ -189,8 +189,8 @@
in_mad->attr_id = IB_SMP_ATTR_PKEY_TABLE;
in_mad->attr_mod = cpu_to_be32(index / 32);
- err = mthca_MAD_IFC(to_mdev(ibdev), 1,
- port, in_mad, out_mad,
+ err = mthca_MAD_IFC(to_mdev(ibdev), 1, 1,
+ port, NULL, NULL, in_mad, out_mad,
&status);
if (err)
goto out;
@@ -228,8 +228,8 @@
in_mad->attr_id = IB_SMP_ATTR_PORT_INFO;
in_mad->attr_mod = cpu_to_be32(port);
- err = mthca_MAD_IFC(to_mdev(ibdev), 1,
- port, in_mad, out_mad,
+ err = mthca_MAD_IFC(to_mdev(ibdev), 1, 1,
+ port, NULL, NULL, in_mad, out_mad,
&status);
if (err)
goto out;
@@ -248,8 +248,8 @@
in_mad->attr_id = IB_SMP_ATTR_GUID_INFO;
in_mad->attr_mod = cpu_to_be32(index / 8);
- err = mthca_MAD_IFC(to_mdev(ibdev), 1,
- port, in_mad, out_mad,
+ err = mthca_MAD_IFC(to_mdev(ibdev), 1, 1,
+ port, NULL, NULL, in_mad, out_mad,
&status);
if (err)
goto out;
--- linux-bk.orig/drivers/infiniband/hw/mthca/mthca_cmd.c 2005-01-23 20:39:02.038561472 -0800
+++ linux-bk/drivers/infiniband/hw/mthca/mthca_cmd.c 2005-01-23 20:49:34.828362800 -0800
@@ -36,6 +36,7 @@
#include <linux/pci.h>
#include <linux/errno.h>
#include <asm/io.h>
+#include <ib_mad.h>
#include "mthca_dev.h"
#include "mthca_config_reg.h"
@@ -1626,13 +1627,24 @@
CMD_TIME_CLASS_B, status);
}
-int mthca_MAD_IFC(struct mthca_dev *dev, int ignore_mkey, int port,
- void *in_mad, void *response_mad, u8 *status) {
+int mthca_MAD_IFC(struct mthca_dev *dev, int ignore_mkey, int ignore_bkey,
+ int port, struct ib_wc* in_wc, struct ib_grh* in_grh,
+ void *in_mad, void *response_mad, u8 *status)
+{
void *box;
dma_addr_t dma;
int err;
+ u32 in_modifier = port;
+ u8 op_modifier = 0;
-#define MAD_IFC_BOX_SIZE 512
+#define MAD_IFC_BOX_SIZE 0x400
+#define MAD_IFC_MY_QPN_OFFSET 0x100
+#define MAD_IFC_RQPN_OFFSET 0x104
+#define MAD_IFC_SL_OFFSET 0x108
+#define MAD_IFC_G_PATH_OFFSET 0x109
+#define MAD_IFC_RLID_OFFSET 0x10a
+#define MAD_IFC_PKEY_OFFSET 0x10e
+#define MAD_IFC_GRH_OFFSET 0x140
box = pci_alloc_consistent(dev->pdev, MAD_IFC_BOX_SIZE, &dma);
if (!box)
@@ -1640,11 +1652,46 @@
memcpy(box, in_mad, 256);
- err = mthca_cmd_box(dev, dma, dma + 256, port, !!ignore_mkey,
+ /*
+ * Key check traps can't be generated unless we have in_wc to
+ * tell us where to send the trap.
+ */
+ if (ignore_mkey || !in_wc)
+ op_modifier |= 0x1;
+ if (ignore_bkey || !in_wc)
+ op_modifier |= 0x2;
+
+ if (in_wc) {
+ u8 val;
+
+ memset(box + 256, 0, 256);
+
+ MTHCA_PUT(box, in_wc->qp_num, MAD_IFC_MY_QPN_OFFSET);
+ MTHCA_PUT(box, in_wc->src_qp, MAD_IFC_RQPN_OFFSET);
+
+ val = in_wc->sl << 4;
+ MTHCA_PUT(box, val, MAD_IFC_SL_OFFSET);
+
+ val = in_wc->dlid_path_bits |
+ (in_wc->wc_flags & IB_WC_GRH ? 0x80 : 0);
+ MTHCA_PUT(box, val, MAD_IFC_GRH_OFFSET);
+
+ MTHCA_PUT(box, in_wc->slid, MAD_IFC_RLID_OFFSET);
+ MTHCA_PUT(box, in_wc->pkey_index, MAD_IFC_PKEY_OFFSET);
+
+ if (in_grh)
+ memcpy((u8 *) box + MAD_IFC_GRH_OFFSET, in_grh, 40);
+
+ op_modifier |= 0x10;
+
+ in_modifier |= in_wc->slid << 16;
+ }
+
+ err = mthca_cmd_box(dev, dma, dma + 512, in_modifier, op_modifier,
CMD_MAD_IFC, CMD_TIME_CLASS_C, status);
if (!err && !*status)
- memcpy(response_mad, box + 256, 256);
+ memcpy(response_mad, box + 512, 256);
pci_free_consistent(dev->pdev, MAD_IFC_BOX_SIZE, box, dma);
return err;
--- linux-bk.orig/drivers/infiniband/hw/mthca/mthca_mad.c 2005-01-23 08:31:45.000000000 -0800
+++ linux-bk/drivers/infiniband/hw/mthca/mthca_mad.c 2005-01-23 20:49:34.827362952 -0800
@@ -232,8 +232,9 @@
return IB_MAD_RESULT_SUCCESS;
err = mthca_MAD_IFC(to_mdev(ibdev),
- !!(mad_flags & IB_MAD_IGNORE_MKEY),
- port_num, in_mad, out_mad,
+ mad_flags & IB_MAD_IGNORE_MKEY,
+ mad_flags & IB_MAD_IGNORE_BKEY,
+ port_num, in_wc, in_grh, in_mad, out_mad,
&status);
if (err) {
mthca_err(to_mdev(ibdev), "MAD_IFC failed\n");
next prev parent reply other threads:[~2005-01-24 6:22 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-01-24 6:14 [PATCH][0/12] InfiniBand: updates for 2.6.11-rc2 Roland Dreier
2005-01-24 6:14 ` [PATCH][1/12] InfiniBand/core: compat_ioctl conversion minor fixes Roland Dreier
2005-01-24 6:14 ` [PATCH][2/12] InfiniBand/mthca: more Arbel Mem-Free support Roland Dreier
2005-01-24 6:14 ` [PATCH][3/12] InfiniBand/mthca: implement modifying port attributes Roland Dreier
2005-01-24 6:14 ` [PATCH][4/12] InfiniBand/core: fix port capability enums bit order Roland Dreier
2005-01-24 6:14 ` [PATCH][5/12] InfiniBand/mthca: don't write ECR in MSI-X mode Roland Dreier
2005-01-24 6:14 ` Roland Dreier [this message]
2005-01-24 6:14 ` [PATCH][7/12] InfiniBand/mthca: optimize event queue handling Roland Dreier
2005-01-24 6:14 ` [PATCH][8/12] InfiniBand/mthca: test IRQ routing during initialization Roland Dreier
2005-01-24 6:14 ` [PATCH][9/12] InfiniBand/ipoib: remove uses of yield() Roland Dreier
2005-01-24 6:14 ` [PATCH][10/12] InfiniBand/core: add IsSM userspace support Roland Dreier
2005-01-24 6:14 ` [PATCH][11/12] InfiniBand/mthca: clean up ioremap()/request_region() usage Roland Dreier
2005-01-24 6:14 ` [PATCH][12/12] InfiniBand/mthca: remove x86 SSE pessimization Roland Dreier
2005-01-24 18:44 ` [openib-general] [PATCH][13/12] InfiniBand/mthca: initialize mutex earlier Roland Dreier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20051232214.2ZjgnbDloKBl5KUG@topspin.com \
--to=roland@topspin.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=openib-general@openib.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome