From: "Derek J. Clark" <derekjohn.clark@gmail.com>
To: Andrei Aldea <andrei1998@gmail.com>,
Jiri Kosina <jikos@kernel.org>,
Benjamin Tissoires <bentiss@kernel.org>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
Lee Jones <lee@kernel.org>, Pavel Machek <pavel@kernel.org>,
linux-leds@vger.kernel.org
Subject: Re: [PATCH 05/15] HID: hid-oxp: fix multicolor LED intensity scaling
Date: Thu, 10 Sep 2026 13:07:21 -0700 [thread overview]
Message-ID: <20057caf-aac9-4288-a82d-0f87fe1d3fc0@gmail.com> (raw)
In-Reply-To: <20260910032115.28669-6-andrei1998@gmail.com>
On 9/9/26 20:21, Andrei Aldea wrote:
> The controller accepts eight-bit RGB components, but the sub-LED channel
> maximum currently inherits the 0-100 overall brightness range. This
> prevents userspace from selecting channel intensities above 100.
>
> Set each channel maximum to 255 and use the multicolor LED core helper to
> scale components with the requested brightness. This also replaces the
> private truncating calculation with the LED core's rounded calculation.
>
> Keep the existing Gen1 and Gen2 color packet layouts unchanged.
>
> Fixes: 84910c459d65 ("HID: hid-oxp: Add OneXPlayer configuration driver")
> Assisted-by: LLM
> Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
> Signed-off-by: Andrei Aldea <andrei1998@gmail.com>
> ---
> drivers/hid/hid-oxp.c | 11 +++++++----
> 1 file changed, 7 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/hid/hid-oxp.c b/drivers/hid/hid-oxp.c
> index c3cfa95..bee1317 100644
> --- a/drivers/hid/hid-oxp.c
> +++ b/drivers/hid/hid-oxp.c
> @@ -1088,7 +1088,6 @@ static ssize_t oxp_rgb_status_show(void)
>
> static int oxp_rgb_color_set(void)
> {
> - u8 max_br = drvdata.led_mc->led_cdev.max_brightness;
> u8 br = drvdata.led_mc->led_cdev.brightness;
> u16 up = get_usage_page(drvdata.hdev);
> u8 green, red, blue;
> @@ -1096,9 +1095,10 @@ static int oxp_rgb_color_set(void)
> u8 *data;
> int i;
>
> - red = br * drvdata.led_mc->subled_info[0].intensity / max_br;
> - green = br * drvdata.led_mc->subled_info[1].intensity / max_br;
> - blue = br * drvdata.led_mc->subled_info[2].intensity / max_br;
> + led_mc_calc_color_components(drvdata.led_mc, br);
> + red = drvdata.led_mc->subled_info[0].brightness;
> + green = drvdata.led_mc->subled_info[1].brightness;
> + blue = drvdata.led_mc->subled_info[2].brightness;
>
> switch (up) {
> case GEN1_USAGE_PAGE:
> @@ -1383,16 +1383,19 @@ static struct mc_subled oxp_rgb_subled_info[] = {
> {
> .color_index = LED_COLOR_ID_RED,
> .intensity = 0x24,
> + .max_intensity = 0xff,
> .channel = 0x1,
> },
> {
> .color_index = LED_COLOR_ID_GREEN,
> .intensity = 0x22,
> + .max_intensity = 0xff,
> .channel = 0x2,
> },
> {
> .color_index = LED_COLOR_ID_BLUE,
> .intensity = 0x99,
> + .max_intensity = 0xff,
> .channel = 0x3,
> },
> };
Tested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
next prev parent reply other threads:[~2026-09-10 20:07 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-10 3:21 [PATCH 00/15] HID: hid-oxp: fix and extend X2-family controller support Andrei Aldea
2026-09-10 3:21 ` [PATCH 01/15] HID: hid-oxp: fix default M1 and M2 key mappings Andrei Aldea
2026-09-10 20:03 ` Derek J. Clark
2026-09-10 3:21 ` [PATCH 02/15] HID: hid-oxp: validate input report lengths before decoding Andrei Aldea
2026-09-10 20:04 ` Derek J. Clark
2026-09-10 3:21 ` [PATCH 03/15] HID: hid-oxp: retain fractional brightness when reading RGB status Andrei Aldea
2026-09-10 20:05 ` Derek J. Clark
2026-09-10 3:21 ` [PATCH 04/15] HID: hid-oxp: reject invalid Gen2 RGB status values Andrei Aldea
2026-09-10 20:06 ` Derek J. Clark
2026-09-10 3:21 ` [PATCH 05/15] HID: hid-oxp: fix multicolor LED intensity scaling Andrei Aldea
2026-09-10 20:07 ` Derek J. Clark [this message]
2026-09-10 3:21 ` [PATCH 06/15] HID: hid-oxp: serialize complete RGB updates Andrei Aldea
2026-09-10 20:07 ` Derek J. Clark
2026-09-10 3:21 ` [PATCH 07/15] HID: hid-oxp: select brightness policy for the new RGB effect Andrei Aldea
2026-09-10 20:11 ` Derek J. Clark
2026-09-10 3:21 ` [PATCH 08/15] HID: hid-oxp: stop configuration work during teardown Andrei Aldea
2026-09-10 20:12 ` Derek J. Clark
2026-09-10 3:21 ` [PATCH 09/15] HID: hid-oxp: keep configuration state per HID interface Andrei Aldea
2026-09-10 20:13 ` Derek J. Clark
2026-09-10 3:21 ` [PATCH 10/15] HID: hid-oxp: handle controller reinitialization across suspend Andrei Aldea
2026-09-10 20:14 ` Derek J. Clark
2026-09-10 3:21 ` [PATCH 11/15] HID: hid-oxp: group declarations and protocol definitions Andrei Aldea
2026-09-10 20:15 ` Derek J. Clark
2026-09-10 3:21 ` [PATCH 12/15] HID: hid-oxp: support three-page button maps on X2 controllers Andrei Aldea
2026-09-10 20:16 ` Derek J. Clark
2026-09-10 3:21 ` [PATCH 13/15] HID: hid-oxp: represent RGB LEDs with a common array Andrei Aldea
2026-09-10 20:17 ` Derek J. Clark
2026-09-10 3:21 ` [PATCH 14/15] HID: hid-oxp: add Gen3 joystick ring RGB support Andrei Aldea
2026-09-10 20:19 ` Derek J. Clark
2026-09-10 3:21 ` [PATCH 15/15] HID: hid-oxp: add X2 auxiliary RGB zones Andrei Aldea
2026-09-10 20:20 ` Derek J. Clark
2026-09-10 20:24 ` [PATCH 00/15] HID: hid-oxp: fix and extend X2-family controller support Derek J. Clark
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20057caf-aac9-4288-a82d-0f87fe1d3fc0@gmail.com \
--to=derekjohn.clark@gmail.com \
--cc=andrei1998@gmail.com \
--cc=bentiss@kernel.org \
--cc=jikos@kernel.org \
--cc=lee@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=pavel@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®