From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932179AbWAUMqi (ORCPT ); Sat, 21 Jan 2006 07:46:38 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932180AbWAUMqi (ORCPT ); Sat, 21 Jan 2006 07:46:38 -0500 Received: from mail.gmx.net ([213.165.64.21]:15071 "HELO mail.gmx.net") by vger.kernel.org with SMTP id S932179AbWAUMqh (ORCPT ); Sat, 21 Jan 2006 07:46:37 -0500 X-Authenticated: #6864226 From: Gerrit =?iso-8859-1?q?Bruchh=E4user?= To: linux-kernel@vger.kernel.org Subject: AHA-7850 doesn't detect scanner anymore Date: Sat, 21 Jan 2006 13:46:34 +0100 User-Agent: KMail/1.8.3 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200601211346.34426.gbruchhaeuser@gmx.de> X-Y-GMX-Trusted: 0 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hello, my old "HP ScanJet IIc" used to work so perfectly but now the kernel can only see something at SCSI-ID 1, but is not able to detect the device properly :-( These are the 'kernel.log' entries after I switched on 'options aic7xxx aic7xxx=verbose,periodic_otag' in modules.conf file : | Jan 21 13:17:18 gbpc PCI: Enabling device 0000:00:0d.0 (0116 -> 0117) | Jan 21 13:17:18 gbpc ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 185 | Jan 21 13:17:18 gbpc ahc_pci:0:13:0: hardware scb 64 bytes; kernel scb 52 bytes; ahc_dma 8 bytes | Jan 21 13:17:18 gbpc ahc_pci:0:13:0: Host Adapter Bios disabled. Using default SCSI device parameters | Jan 21 13:17:18 gbpc scsi12 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 | Jan 21 13:17:18 gbpc | Jan 21 13:17:18 gbpc aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs | Jan 21 13:17:18 gbpc | Jan 21 13:17:33 gbpc (scsi12:A:0:0): Saw Selection Timeout for SCB 0x3 | Jan 21 13:17:34 gbpc (scsi12:A:1:0): SCB 2: requests Check Status | Jan 21 13:17:34 gbpc (scsi12:A:1:0): Handled Residual of 36 bytes | Jan 21 13:17:34 gbpc (scsi12:A:1:0): Sending Sense | Jan 21 13:17:34 gbpc (scsi12:A:1:0): Handled Residual of 36 bytes | Jan 21 13:17:34 gbpc (scsi12:A:1:0): SCB 3: requests Check Status | Jan 21 13:17:34 gbpc (scsi12:A:1:0): Handled Residual of 36 bytes | Jan 21 13:17:34 gbpc (scsi12:A:1:0): Sending Sense | Jan 21 13:17:34 gbpc (scsi12:A:1:0): Handled Residual of 36 bytes | Jan 21 13:17:35 gbpc (scsi12:A:1:0): SCB 2: requests Check Status | Jan 21 13:17:35 gbpc (scsi12:A:1:0): Handled Residual of 36 bytes | Jan 21 13:17:35 gbpc (scsi12:A:1:0): Sending Sense | Jan 21 13:17:35 gbpc (scsi12:A:1:0): Handled Residual of 36 bytes | Jan 21 13:17:35 gbpc (scsi12:A:2:0): Saw Selection Timeout for SCB 0x3 | Jan 21 13:17:35 gbpc (scsi12:A:3:0): Saw Selection Timeout for SCB 0x2 | Jan 21 13:17:36 gbpc (scsi12:A:4:0): Saw Selection Timeout for SCB 0x3 | Jan 21 13:17:36 gbpc (scsi12:A:5:0): Saw Selection Timeout for SCB 0x2 | Jan 21 13:17:36 gbpc (scsi12:A:6:0): Saw Selection Timeout for SCB 0x3 The SCSI-terminator is properly attached to the scanner and the wires are okay as well. Is there a way to find-out more what actually causes the problem? As I am not subscribed to the list, please when you answer, put my mail address to CC Many thanks in advance, Gerrit