From: Dominik Brodowski <linux@dominikbrodowski.net>
To: jesse.brandeburg@intel.com, jeffrey.t.kirsher@intel.com,
john.ronciak@intel.com, jgarzik@pobox.com
Cc: linux-netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: patch "e100: Fix TX hang and RMCP Ping issue" (post-2.6.16-rc1) causes suspend-to-ram breakage
Date: Mon, 30 Jan 2006 00:25:37 +0100 [thread overview]
Message-ID: <20060129232537.GA8343@dominikbrodowski.de> (raw)
Hi,
git bisect revealed that 24180333206519e6b0c4633eab81e773b4527cac is
the first bad commit, which is
"e100: Fix TX hang and RMCP Ping issue (due to a microcode loading issue)"
With it applied, suspend-to-ram fails to resume to userspace, which is
required on my system to get video back (vbetool).
02:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller (rev 81)
Subsystem: Samsung Electronics Co Ltd Unknown device c009
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min, 14000ns max), Cache Line Size 08
Interrupt: pin A routed to IRQ 5
Region 0: Memory at e0201000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 3000 [size=64]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
eth0 Link encap:Ethernet HWaddr ...................
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: Yes
Speed: 10Mb/s
Duplex: Half
Port: MII
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: g
Wake-on: g
Current message level: 0x00000007 (7)
Link detected: no
No cable inserted, therefore the link is down...
Dominik
next reply other threads:[~2006-01-29 23:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-01-29 23:25 Dominik Brodowski [this message]
2006-01-30 7:44 ` Jesse Brandeburg
2006-01-30 10:38 ` Dominik Brodowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060129232537.GA8343@dominikbrodowski.de \
--to=linux@dominikbrodowski.net \
--cc=jeffrey.t.kirsher@intel.com \
--cc=jesse.brandeburg@intel.com \
--cc=jgarzik@pobox.com \
--cc=john.ronciak@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®