Re: sis96x compiled in by error: delay of one minute at boot

[Etienne Lorrain <etienne_lorrain@yahoo.fr>]

>> Jean Delvare wrote:
>> Mark, can you provide a patch to your i2c-sis96x driver so that it'll
>> keep quiet when no supported device is found?
>
>Mark M. Hoffman wrote:
>Lots of drivers printk messages when they load - IMO it's useful info.
>E.g. how else could Etienne discover that he accidentally built a kernel
>with dozens of i2c bus drivers (and probably all of the hwmon drivers)
>built-in by accident?

 I did not built with all hwmon drivers because I could determine what I
 had on my mainboard. For me, because the kernel say it enters the I2C
 system by the line:
Mar 13 21:46:48 kernel: [   47.705445] i2c /dev entries driver
 It could print a line when finished probing all those I2C drivers by a
 line like:
Mar 13 21:46:48 kernel: [   50.705445] i2c driver found: aaa-i2c, bbb-i2c.
 And then I can have a clue on what to include in my monolitic build.
 I do not care about such timeout on _one_ build, as long as I know what
 to do for next build. Another possibility is to print a line when an I2C
 detection has failed: you know that it has taken quite a lot of time and
 it should not have been done in the first place (even for a module
 because this module should not have been inserted).

 It also protect the I2C group from people like me complainning
 because completely unrelated messages like
Mar 13 22:12:54 kernel: [   61.997032]  : Detection failed at step 3

Elsewhere Jean Delvare wrote:
> That being said, the key problem being stuck i2c busses, it's even more
> important to get rid of these. You can use "i2cdetect -l" to list all
> detected i2c bus, so you'll see if you have any unwanted bus left.

I do not have this i2cdetect software installed on my system.

> If all drivers were actually printking messages when they load,
> monolithic kernels would be a mess (not that I much understand the
> point of such monolithic kernels, but...) You wouldn't be able to tell from
> the boot log which drivers are actually used by the system, and which
> aren't.

Maybe it is only me, and I am totally wrong, but it seems that the
resulting _monolitic_ kernel is quicker.
- Maybe it is quicker because a lot of modules try to insert themself
and fails as an autodetection subsystem in some distributions.
- Maybe because fetching a lot of files (kernel modules) at boot
time creates a lot of disk activity - and it is better to load everything
at startup by the bootloader (hint: Gujin).
- Maybe it is quicker because when loading a module there is a lot
of addresses to resolve at run time and that takes time, instead of
doing it once when you are linking the monolitic kernel.
- Maybe it is simply (correct me if I am wrong) because modules
_have_ to be compiled as a relocatable library (because the load
address of code and data segment isn't known) and that is acheived
by the compiler by fixing register %ebx to the base address - and
on i386 removing one of the 4 (or 6) general purpose register
produces code which is a lot slower (up to the point you do not care
for which processor you compile the kernel: the improvement done
by one or two added instruction/features do not compensate for this
kind of loss).

Maybe also managing the tree /lib/modules/* and the initrd take
more time than simply doing once a clean linux/.config and
maintaining this file by saying "No" to most added drivers...

  Cheers,
  Etienne.



	

	
		
___________________________________________________________________________ 
Nouveau : téléphonez moins cher avec Yahoo! Messenger ! Découvez les tarifs exceptionnels pour appeler la France et l'international.
Téléchargez sur http://fr.messenger.yahoo.com