Hi!

Trying to build 2.6.17-rc2 I get a few unresolved symbols..

IIRC floppy.ko has never built properly for me, is it *really* broken for 
good? :o)

  INSTALL sound/usb/snd-usb-lib.ko
if [ -r System.map -a -x /sbin/depmod ]; then /sbin/depmod -ae -F System.map 
-b /root/RPM/BUILD/kernel-linus-2.6/temp-root -r 2.6.17-rc2.17mdk; fi
WARNING: /root/RPM/BUILD/kernel-linus-2.6/temp-root/lib/modules/2.6.17-rc2.17mdk/kernel/drivers/net/wan/lmc/lmc.ko 
needs unknown symbol virt_to_bus_not_defined_use_pci_map
WARNING: /root/RPM/BUILD/kernel-linus-2.6/temp-root/lib/modules/2.6.17-rc2.17mdk/kernel/drivers/message/i2o/i2o_config.ko 
needs unknown symbol virt_to_bus_not_defined_use_pci_map
WARNING: /root/RPM/BUILD/kernel-linus-2.6/temp-root/lib/modules/2.6.17-rc2.17mdk/kernel/drivers/block/floppy.ko 
needs unknown symbol sparc_floppy_irq
WARNING: /root/RPM/BUILD/kernel-linus-2.6/temp-root/lib/modules/2.6.17-rc2.17mdk/kernel/drivers/atm/zatm.ko 
needs unknown symbol virt_to_bus_not_defined_use_pci_map
WARNING: /root/RPM/BUILD/kernel-linus-2.6/temp-root/lib/modules/2.6.17-rc2.17mdk/kernel/drivers/atm/zatm.ko 
needs unknown symbol bus_to_virt_not_defined_use_pci_map
WARNING: /root/RPM/BUILD/kernel-linus-2.6/temp-root/lib/modules/2.6.17-rc2.17mdk/kernel/drivers/atm/horizon.ko 
needs unknown symbol bus_to_virt_not_defined_use_pci_map
WARNING: /root/RPM/BUILD/kernel-linus-2.6/temp-root/lib/modules/2.6.17-rc2.17mdk/kernel/drivers/atm/firestream.ko 
needs unknown symbol virt_to_bus_not_defined_use_pci_map
WARNING: /root/RPM/BUILD/kernel-linus-2.6/temp-root/lib/modules/2.6.17-rc2.17mdk/kernel/drivers/atm/firestream.ko 
needs unknown symbol bus_to_virt_not_defined_use_pci_map
WARNING: /root/RPM/BUILD/kernel-linus-2.6/temp-root/lib/modules/2.6.17-rc2.17mdk/kernel/drivers/atm/ambassador.ko 
needs unknown symbol virt_to_bus_not_defined_use_pci_map
WARNING: /root/RPM/BUILD/kernel-linus-2.6/temp-root/lib/modules/2.6.17-rc2.17mdk/kernel/drivers/atm/ambassador.ko 
needs unknown symbol bus_to_virt_not_defined_use_pci_map
make: *** [_modinst_post] Error 1

I'm still not subscribed to this list, so CC me if any more info is needed.

my .config is included :)

-- 
Med vennlig hilsen
Per Øyvind Karlsen