From: Tony Lindgren <tony@atomide.com>
To: linux-kernel@vger.kernel.org
Cc: Russell King <rmk+lkml@arm.linux.org.uk>,
Pierre Ossman <drzeus-list@drzeus.cx>,
Carlos Aguiar <carlos.aguiar@indt.org.br>
Subject: MMC: 1/2 Make OMAP MMC work
Date: Thu, 4 May 2006 00:24:40 -0700 [thread overview]
Message-ID: <20060504072439.GE8664@atomide.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 1 bytes --]
[-- Attachment #2: patch-omap-mmc-compile --]
[-- Type: text/plain, Size: 4176 bytes --]
This patch makes OMAP MMC work again:
- Fix compile errors
- Do not ioremap base as it is already statically mapped
- Clean-up platform device handling
- Fix compile warnings
Signed-off-by: Tony Lindgren <tony@atomide.com>
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -162,8 +162,8 @@ static u64 mmc1_dmamask = 0xffffffff;
static struct resource mmc1_resources[] = {
{
- .start = IO_ADDRESS(OMAP_MMC1_BASE),
- .end = IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f,
+ .start = OMAP_MMC1_BASE,
+ .end = OMAP_MMC1_BASE + 0x7f,
.flags = IORESOURCE_MEM,
},
{
@@ -191,8 +191,8 @@ static u64 mmc2_dmamask = 0xffffffff;
static struct resource mmc2_resources[] = {
{
- .start = IO_ADDRESS(OMAP_MMC2_BASE),
- .end = IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f,
+ .start = OMAP_MMC2_BASE,
+ .end = OMAP_MMC2_BASE + 0x7f,
.flags = IORESOURCE_MEM,
},
{
diff --git a/drivers/mmc/omap.c b/drivers/mmc/omap.c
index becb3c6..7c8b6ce 100644
--- a/drivers/mmc/omap.c
+++ b/drivers/mmc/omap.c
@@ -61,6 +61,7 @@ struct mmc_omap_host {
unsigned char id; /* 16xx chips have 2 MMC blocks */
struct clk * iclk;
struct clk * fclk;
+ struct resource *res;
void __iomem *base;
int irq;
unsigned char bus_mode;
@@ -340,8 +341,6 @@ static void
mmc_omap_xfer_data(struct mmc_omap_host *host, int write)
{
int n;
- void __iomem *reg;
- u16 *p;
if (host->buffer_bytes_left == 0) {
host->sg_idx++;
@@ -658,8 +657,8 @@ static void mmc_omap_dma_cb(int lch, u16
struct mmc_data *mmcdat = host->data;
if (unlikely(host->dma_ch < 0)) {
- dev_err(mmc_dev(host->mmc), "DMA callback while DMA not
- enabled\n");
+ dev_err(mmc_dev(host->mmc),
+ "DMA callback while DMA not enabled\n");
return;
}
/* FIXME: We really should do something to _handle_ the errors */
@@ -973,20 +972,20 @@ static int __init mmc_omap_probe(struct
struct omap_mmc_conf *minfo = pdev->dev.platform_data;
struct mmc_host *mmc;
struct mmc_omap_host *host = NULL;
+ struct resource *r;
int ret = 0;
+ int irq;
- if (platform_get_resource(pdev, IORESOURCE_MEM, 0) ||
- platform_get_irq(pdev, IORESOURCE_IRQ, 0)) {
- dev_err(&pdev->dev, "mmc_omap_probe: invalid resource type\n");
- return -ENODEV;
- }
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(pdev, 0);
+ if (!r || irq < 0)
+ return -ENXIO;
- if (!request_mem_region(pdev->resource[0].start,
+ r = request_mem_region(pdev->resource[0].start,
pdev->resource[0].end - pdev->resource[0].start + 1,
- pdev->name)) {
- dev_dbg(&pdev->dev, "request_mem_region failed\n");
+ pdev->name);
+ if (!r)
return -EBUSY;
- }
mmc = mmc_alloc_host(sizeof(struct mmc_omap_host), &pdev->dev);
if (!mmc) {
@@ -1003,6 +1002,8 @@ static int __init mmc_omap_probe(struct
host->dma_timer.data = (unsigned long) host;
host->id = pdev->id;
+ host->res = r;
+ host->irq = irq;
if (cpu_is_omap24xx()) {
host->iclk = clk_get(&pdev->dev, "mmc_ick");
@@ -1032,13 +1033,9 @@ static int __init mmc_omap_probe(struct
host->dma_ch = -1;
host->irq = pdev->resource[1].start;
- host->base = ioremap(pdev->res.start, SZ_4K);
- if (!host->base) {
- ret = -ENOMEM;
- goto out;
- }
+ host->base = (void __iomem*)IO_ADDRESS(r->start);
- if (minfo->wire4)
+ if (minfo->wire4)
mmc->caps |= MMC_CAP_4_BIT_DATA;
mmc->ops = &mmc_omap_ops;
@@ -1057,8 +1054,8 @@ static int __init mmc_omap_probe(struct
if (host->power_pin >= 0) {
if ((ret = omap_request_gpio(host->power_pin)) != 0) {
- dev_err(mmc_dev(host->mmc), "Unable to get GPIO
- pin for MMC power\n");
+ dev_err(mmc_dev(host->mmc),
+ "Unable to get GPIO pin for MMC power\n");
goto out;
}
omap_set_gpio_direction(host->power_pin, 0);
@@ -1100,7 +1097,7 @@ static int __init mmc_omap_probe(struct
device_remove_file(&pdev->dev, &dev_attr_cover_switch);
}
if (ret) {
- dev_wan(mmc_dev(host->mmc), "Unable to create sysfs attributes\n");
+ dev_warn(mmc_dev(host->mmc), "Unable to create sysfs attributes\n");
free_irq(OMAP_GPIO_IRQ(host->switch_pin), host);
omap_free_gpio(host->switch_pin);
host->switch_pin = -1;
next reply other threads:[~2006-05-04 7:24 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-04 7:24 Tony Lindgren [this message]
2006-05-04 7:26 ` MMC: 2/2 Fix MMC_POWER_UP on some OMAP boards Tony Lindgren
2006-05-04 7:54 ` Russell King
2006-05-04 9:31 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060504072439.GE8664@atomide.com \
--to=tony@atomide.com \
--cc=carlos.aguiar@indt.org.br \
--cc=drzeus-list@drzeus.cx \
--cc=linux-kernel@vger.kernel.org \
--cc=rmk+lkml@arm.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome