mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Stephane Eranian <eranian@frankl.hpl.hp.com>
To: linux-kernel@vger.kernel.org
Cc: eranian@hpl.hp.com
Subject: [PATCH 9/11] perfmon2 patch for review: modified powerpc files
Date: Fri, 12 May 2006 09:33:50 -0700	[thread overview]
Message-ID: <200605121633.k4CGXofF027370@frankl.hpl.hp.com> (raw)

This patch contains the modified files for powerpc.




diff -ur linux-2.6.17-rc4.orig/arch/powerpc/Kconfig linux-2.6.17-rc4/arch/powerpc/Kconfig
--- linux-2.6.17-rc4.orig/arch/powerpc/Kconfig	2006-05-12 03:16:10.000000000 -0700
+++ linux-2.6.17-rc4/arch/powerpc/Kconfig	2006-05-12 03:18:52.000000000 -0700
@@ -299,6 +299,18 @@
 	bool
 	depends on 4xx || 8xx || E200
 	default y
+
+menu "Hardware Performance Monitoring support"
+config PERFMON
+	bool "Perfmon2 performance monitoring interface"
+	default y
+	help
+	include the perfmon2 performance monitoring interface
+	in the kernel.  See <http://www.hpl.hp.com/research/linux/perfmon> for
+	more details.  If you're unsure, say Y.
+source "arch/powerpc/perfmon/Kconfig"
+endmenu
+
 endmenu
 
 source "init/Kconfig"
diff -ur linux-2.6.17-rc4.orig/arch/powerpc/Makefile linux-2.6.17-rc4/arch/powerpc/Makefile
--- linux-2.6.17-rc4.orig/arch/powerpc/Makefile	2006-05-12 03:16:10.000000000 -0700
+++ linux-2.6.17-rc4/arch/powerpc/Makefile	2006-05-12 03:18:52.000000000 -0700
@@ -135,6 +135,7 @@
 				   arch/powerpc/platforms/
 core-$(CONFIG_MATH_EMULATION)	+= arch/powerpc/math-emu/
 core-$(CONFIG_XMON)		+= arch/powerpc/xmon/
+core-$(CONFIG_PERFMON)		+= arch/powerpc/perfmon/
 
 drivers-$(CONFIG_OPROFILE)	+= arch/powerpc/oprofile/
 
diff -ur linux-2.6.17-rc4.orig/arch/powerpc/kernel/entry_64.S linux-2.6.17-rc4/arch/powerpc/kernel/entry_64.S
--- linux-2.6.17-rc4.orig/arch/powerpc/kernel/entry_64.S	2006-05-12 03:16:10.000000000 -0700
+++ linux-2.6.17-rc4/arch/powerpc/kernel/entry_64.S	2006-05-12 03:18:52.000000000 -0700
@@ -569,6 +569,9 @@
 	b	.ret_from_except_lite
 
 1:	bl	.save_nvgprs
+#ifdef CONFIG_PERFMON
+	bl	.ppc64_pfm_handle_work
+#endif /* CONFIG_PERFMON */
 	li	r3,0
 	addi	r4,r1,STACK_FRAME_OVERHEAD
 	bl	.do_signal
diff -ur linux-2.6.17-rc4.orig/arch/powerpc/kernel/process.c linux-2.6.17-rc4/arch/powerpc/kernel/process.c
--- linux-2.6.17-rc4.orig/arch/powerpc/kernel/process.c	2006-05-12 03:16:10.000000000 -0700
+++ linux-2.6.17-rc4/arch/powerpc/kernel/process.c	2006-05-12 03:18:52.000000000 -0700
@@ -35,6 +35,7 @@
 #include <linux/mqueue.h>
 #include <linux/hardirq.h>
 #include <linux/utsname.h>
+#include <linux/perfmon.h>
 
 #include <asm/pgtable.h>
 #include <asm/uaccess.h>
@@ -465,6 +466,7 @@
 void exit_thread(void)
 {
 	discard_lazy_cpu_state();
+	pfm_exit_thread(current);
 }
 
 void flush_thread(void)
@@ -576,6 +578,7 @@
 	kregs->nip = (unsigned long)ret_from_fork;
 	p->thread.last_syscall = -1;
 #endif
+	pfm_copy_thread(p, childregs);
 
 	return 0;
 }
diff -ur linux-2.6.17-rc4.orig/arch/powerpc/kernel/systbl.S linux-2.6.17-rc4/arch/powerpc/kernel/systbl.S
--- linux-2.6.17-rc4.orig/arch/powerpc/kernel/systbl.S	2006-05-12 03:16:10.000000000 -0700
+++ linux-2.6.17-rc4/arch/powerpc/kernel/systbl.S	2006-05-12 03:20:18.000000000 -0700
@@ -338,6 +338,18 @@
 SYSCALL(readlinkat)
 SYSCALL(fchmodat)
 SYSCALL(faccessat)
+SYSCALL(pfm_create_context)
+SYSCALL(pfm_write_pmcs)
+SYSCALL(pfm_write_pmds)
+SYSCALL(pfm_read_pmds)
+SYSCALL(pfm_load_context)
+SYSCALL(pfm_start)
+SYSCALL(pfm_stop)
+SYSCALL(pfm_restart)
+SYSCALL(pfm_create_evtsets)
+SYSCALL(pfm_getinfo_evtsets)
+SYSCALL(pfm_delete_evtsets)
+SYSCALL(pfm_unload_context)
 
 /*
  * please add new calls to arch/powerpc/platforms/cell/spu_callbacks.c
diff -ur linux-2.6.17-rc4.orig/include/asm-powerpc/processor.h linux-2.6.17-rc4/include/asm-powerpc/processor.h
--- linux-2.6.17-rc4.orig/include/asm-powerpc/processor.h	2006-05-12 03:16:14.000000000 -0700
+++ linux-2.6.17-rc4/include/asm-powerpc/processor.h	2006-05-12 03:18:52.000000000 -0700
@@ -169,6 +169,7 @@
 	unsigned long	spefscr;	/* SPE & eFP status */
 	int		used_spe;	/* set if process has used spe */
 #endif /* CONFIG_SPE */
+	void *pfm_context;
 };
 
 #define ARCH_MIN_TASKALIGN 16
diff -ur linux-2.6.17-rc4.orig/include/asm-powerpc/unistd.h linux-2.6.17-rc4/include/asm-powerpc/unistd.h
--- linux-2.6.17-rc4.orig/include/asm-powerpc/unistd.h	2006-05-12 03:16:14.000000000 -0700
+++ linux-2.6.17-rc4/include/asm-powerpc/unistd.h	2006-05-12 03:23:11.000000000 -0700
@@ -321,8 +321,20 @@
 #define __NR_readlinkat		296
 #define __NR_fchmodat		297
 #define __NR_faccessat		298
-
-#define __NR_syscalls		299
+#define __NR_pfm_create_context	299
+#define __NR_pfm_write_pmcs	(__NR_pfm_create_context+1)
+#define __NR_pfm_write_pmds	(__NR_pfm_create_context+2)
+#define __NR_pfm_read_pmds	(__NR_pfm_create_context+3)
+#define __NR_pfm_load_context	(__NR_pfm_create_context+4)
+#define __NR_pfm_start		(__NR_pfm_create_context+5)
+#define __NR_pfm_stop		(__NR_pfm_create_context+6)
+#define __NR_pfm_restart	(__NR_pfm_create_context+7)
+#define __NR_pfm_create_evtsets	(__NR_pfm_create_context+8)
+#define __NR_pfm_getinfo_evtsets (__NR_pfm_create_context+9)
+#define __NR_pfm_delete_evtsets (__NR_pfm_create_context+10)
+#define __NR_pfm_unload_context	(__NR_pfm_create_context+11)
+ 
+#define __NR_syscalls		310
 
 #ifdef __KERNEL__
 #define __NR__exit __NR_exit

                 reply	other threads:[~2006-05-12 16:40 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200605121633.k4CGXofF027370@frankl.hpl.hp.com \
    --to=eranian@frankl.hpl.hp.com \
    --cc=eranian@hpl.hp.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®