mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Jörn Engel" <joern@wohnheim.fh-wedel.de>
To: David Brownell <david-b@pacbell.net>
Cc: jffs-dev@axis.com, dwmw2@infradead.org,
	Linux Kernel list <linux-kernel@vger.kernel.org>,
	linux-mtd@lists.infradead.org
Subject: Re: jffs2 build fixes
Date: Tue, 16 May 2006 17:09:28 +0200	[thread overview]
Message-ID: <20060516150928.GC11656@wohnheim.fh-wedel.de> (raw)
In-Reply-To: <200605160755.38606.david-b@pacbell.net>

On Tue, 16 May 2006 07:55:37 -0700, David Brownell wrote:
> On Saturday 01 April 2006 8:31 am, David Brownell wrote:
> > against today's GIT; there's a section error and
> > several printk format warnings.  x86_64.
> 
> I see that Andrew also got tired of such printk warnings, so his
> fix is now in the kernel.org tree ... here's a resend of this
> patch, updated against today's GIT by removing two of the printk
> warning fixes.

jffs-dev@axis.com is practically dead.  Iirc, the list was used for
the old jffs[1] code.  Jffs2 is usually discussed on
linux-mtd@lists.infradead.org (added to Cc:).

> Resolve some JFFS2 build problems:
>   (a) section mismatch error
>   (b) wrong printk format warnings
> 
> The section mismatch issue was fixed by making a few more routines as
> belonging in init or exit sections, but there are more routines that
> could (should!) get such annotations.

Patch looks sane.  Does it still apply against dwmw2's latest tree?
http://git.infradead.org/?p=mtd-2.6.git

[ Patch kept for the benefit of linux-mtd ]

> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
> 
> Index: g26/fs/jffs2/compr.c
> ===================================================================
> --- g26.orig/fs/jffs2/compr.c	2006-05-12 18:48:21.000000000 -0700
> +++ g26/fs/jffs2/compr.c	2006-05-12 19:40:08.000000000 -0700
> @@ -412,7 +412,7 @@ void jffs2_free_comprbuf(unsigned char *
>                  kfree(comprbuf);
>  }
>  
> -int jffs2_compressors_init(void)
> +int __init jffs2_compressors_init(void)
>  {
>  /* Registering compressors */
>  #ifdef CONFIG_JFFS2_ZLIB
> @@ -440,7 +440,7 @@ int jffs2_compressors_init(void)
>          return 0;
>  }
>  
> -int jffs2_compressors_exit(void)
> +int __exit jffs2_compressors_exit(void)
>  {
>  /* Unregistering compressors */
>  #ifdef CONFIG_JFFS2_RUBIN
> Index: g26/fs/jffs2/compr_zlib.c
> ===================================================================
> --- g26.orig/fs/jffs2/compr_zlib.c	2006-05-12 18:48:21.000000000 -0700
> +++ g26/fs/jffs2/compr_zlib.c	2006-05-12 19:40:08.000000000 -0700
> @@ -60,7 +60,7 @@ static int __init alloc_workspaces(void)
>  	return 0;
>  }
>  
> -static void free_workspaces(void)
> +static void __exit free_workspaces(void)
>  {
>  	vfree(def_strm.workspace);
>  	vfree(inf_strm.workspace);
> @@ -216,7 +216,7 @@ int __init jffs2_zlib_init(void)
>      return ret;
>  }
>  
> -void jffs2_zlib_exit(void)
> +void __exit jffs2_zlib_exit(void)
>  {
>      jffs2_unregister_compressor(&jffs2_zlib_comp);
>      free_workspaces();
> Index: g26/fs/jffs2/readinode.c
> ===================================================================
> --- g26.orig/fs/jffs2/readinode.c	2006-05-12 18:48:21.000000000 -0700
> +++ g26/fs/jffs2/readinode.c	2006-05-12 19:40:08.000000000 -0700
> @@ -204,7 +204,7 @@ static inline int read_dnode(struct jffs
>  
>  	tn = jffs2_alloc_tmp_dnode_info();
>  	if (!tn) {
> -		JFFS2_ERROR("failed to allocate tn (%d bytes).\n", sizeof(*tn));
> +		JFFS2_ERROR("failed to allocate tn (%zd bytes).\n", sizeof(*tn));
>  		return -ENOMEM;
>  	}
>  
> @@ -434,7 +434,7 @@ static int read_more(struct jffs2_sb_inf
>  	}
>  
>  	if (retlen < len) {
> -		JFFS2_ERROR("short read at %#08x: %d instead of %d.\n",
> +		JFFS2_ERROR("short read at %#08x: %zu instead of %d.\n",
>  				offs, retlen, len);
>  		return -EIO;
>  	}
> @@ -542,7 +542,8 @@ static int jffs2_get_inode_nodes(struct 
>  		}
>  
>  		if (retlen < len) {
> -			JFFS2_ERROR("short read at %#08x: %d instead of %d.\n", ref_offset(ref), retlen, len);
> +			JFFS2_ERROR("short read at %#08x: %zd instead of %d.\n",
> +					ref_offset(ref), retlen, len);
>  			err = -EIO;
>  			goto free_out;
>  		}


Jörn

-- 
They laughed at Galileo.  They laughed at Copernicus.  They laughed at
Columbus. But remember, they also laughed at Bozo the Clown.
-- unknown

  parent reply	other threads:[~2006-05-16 15:09 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <200604010831.57875.david-b@pacbell.net>
2006-05-16 14:55 ` David Brownell
2006-05-16 15:08   ` David Woodhouse
2006-05-25  4:02     ` David Brownell
2006-05-16 15:09   ` Jörn Engel [this message]
2006-05-16 15:25     ` David Brownell
2006-05-16 15:33       ` Jörn Engel
2006-05-16 15:34         ` David Woodhouse

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20060516150928.GC11656@wohnheim.fh-wedel.de \
    --to=joern@wohnheim.fh-wedel.de \
    --cc=david-b@pacbell.net \
    --cc=dwmw2@infradead.org \
    --cc=jffs-dev@axis.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®