source [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15) SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:01.0 IO window: b000-bfff MEM window: cfe00000-cfefffff PREFETCH window: bfc00000-cfcfffff Machine check exception polling timer started. Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:02.5 SIS5513: chipset revision 208 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS735 ATA 100 (2nd gen) controller ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: ST340016A, ATA DISK drive hdb: ST3200822A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: CD-ROM 52X/AKH, ATAPI CD/DVD-ROM drive hdd: ST3120026A, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes not supported hda: hda1 hda2 hda3 hdb: max request size: 512KiB hdb: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100) hdb: cache flushes supported hdb: unknown partition table hdd: max request size: 512KiB hdd: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) hdd: cache flushes supported hdd: hdd1 < > hdc: ATAPI 52X CD-ROM drive, 192kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 usbmon: debugfs is not available usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice NET: Registered protocol family 2 input: AT Translated Set 2 keyboard as /class/input/input0 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 152k freed input: PS2++ Logitech Wheel Mouse as /class/input/input1 Adding 4899816k swap on /dev/hda3. Priority:10 extents:1 across:4899816k EXT3 FS on hda1, internal journal Real Time Clock Driver v1.12ac Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. Linux video capture interface: v1.00 usbcore: registered new driver ov511 drivers/usb/media/ov511.c: v1.64 for Linux 2.5 : ov511 USB Camera Driver bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture sis900.c: v1.08.09 Sep. 19 2005 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 4 PCI: setting IRQ 4 as level-triggered ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKG] -> GSI 4 (level, low) -> IRQ 4 0000:00:03.0: Realtek RTL8201 PHY transceiver found at address 1. 0000:00:03.0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 4, 00:00:00:00:00:00. Linux agpgart interface v0.101 (c) Dave Jones [drm] Initialized drm 1.0.1 20051102 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [drm] Initialized radeon 1.22.0 20051229 on minor 0 EXT3-fs warning: maximal mount count reached, running e2fsck is recommended kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. EXT3-fs warning: maximal mount count reached, running e2fsck is recommended kjournald starting. Commit interval 5 seconds EXT3 FS on hdb, internal journal EXT3-fs: mounted filesystem with ordered data mode. EXT3-fs warning: maximal mount count reached, running e2fsck is recommended kjournald starting. Commit interval 5 seconds EXT3 FS on hdd, internal journal EXT3-fs: mounted filesystem with ordered data mode. ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3 PCI: setting IRQ 3 as level-triggered ACPI: PCI Interrupt 0000:00:02.2[D] -> Link [LNKD] -> GSI 3 (level, low) -> IRQ 3 ohci_hcd 0000:00:02.2: OHCI Host Controller ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.2: irq 3, io mem 0xcfffe000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:02.3[A] -> Link [LNKH] -> GSI 5 (level, low) -> IRQ 5 ohci_hcd 0000:00:02.3: OHCI Host Controller ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.3: irq 5, io mem 0xcffff000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected eth0: Media Link On 100mbps full-duplex bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture device eth0 entered promiscuous mode agpgart: Detected SiS 735 chipset agpgart: AGP aperture is 64M @ 0xd0000000 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 intel8x0_measure_ac97_clock: measured 65917 usecs intel8x0: clocking to 48000 [drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held [drm:drm_unlock] *ERROR* Process 3570 using kernel context 0 ALSA sound/core/pcm_lib.c:254: Unexpected hw_pointer value [2] (stream = 0, delta: -547, max jitter = 4456): wrong interrupt acknowledge? [] snd_pcm_update_hw_ptr+0x139/0x280 [snd_pcm] [] snd_pcm_common_ioctl1+0x42e/0xf80 [snd_pcm] [] schedule+0x315/0x640 [] schedule_timeout+0x4c/0xc0 [] poll_freewait+0x48/0x60 [] snd_pcm_playback_ioctl1+0x5f/0x620 [snd_pcm] [] snd_pcm_kernel_playback_ioctl+0x2c/0x40 [snd_pcm] [] snd_pcm_oss_ioctl+0xa95/0xc10 [snd_pcm_oss] [] do_ioctl+0x35/0xa0 [] vfs_ioctl+0x5d/0x320 [] sys_select+0x11b/0x200 [] sys_ioctl+0x45/0x70 [] syscall_call+0x7/0xb ALSA sound/core/pcm_lib.c:138: XRUN: pcmC0D0p [] snd_pcm_period_elapsed+0x1be/0x3b0 [snd_pcm] [] snd_intel8x0_interrupt+0x18e/0x240 [snd_intel8x0] [] handle_IRQ_event+0x3d/0x70 [] __do_IRQ+0x76/0x100 [] sys_sigreturn+0xa5/0xc0 [] do_IRQ+0x19/0x30 [] common_interrupt+0x1a/0x20 ALSA sound/core/pcm_lib.c:138: XRUN: pcmC0D0p [] snd_pcm_period_elapsed+0x1be/0x3b0 [snd_pcm] [] snd_intel8x0_interrupt+0x18e/0x240 [snd_intel8x0] [] handle_IRQ_event+0x3d/0x70 [] __do_IRQ+0x76/0x100 [] do_IRQ+0x19/0x30 [] common_interrupt+0x1a/0x20 ALSA sound/core/pcm_lib.c:138: XRUN: pcmC0D0p [] snd_pcm_period_elapsed+0x1be/0x3b0 [snd_pcm] [] snd_intel8x0_interrupt+0x18e/0x240 [snd_intel8x0] [] handle_IRQ_event+0x3d/0x70 [] __do_IRQ+0x76/0x100 [] do_IRQ+0x19/0x30 [] common_interrupt+0x1a/0x20 ALSA sound/core/pcm_lib.c:138: XRUN: pcmC0D0p [] snd_pcm_period_elapsed+0x1be/0x3b0 [snd_pcm] [] snd_intel8x0_interrupt+0x18e/0x240 [snd_intel8x0] [] handle_IRQ_event+0x3d/0x70 [] __do_IRQ+0x76/0x100 [] do_IRQ+0x19/0x30 [] common_interrupt+0x1a/0x20 [] handle_IRQ_event+0x18/0x70 [] __do_IRQ+0x76/0x100 [] do_IRQ+0x19/0x30 [] common_interrupt+0x1a/0x20 ALSA sound/core/pcm_lib.c:138: XRUN: pcmC0D0p [] snd_pcm_period_elapsed+0x1be/0x3b0 [snd_pcm] [] snd_intel8x0_interrupt+0x18e/0x240 [snd_intel8x0] [] handle_IRQ_event+0x3d/0x70 [] __do_IRQ+0x76/0x100 [] do_IRQ+0x19/0x30 [] common_interrupt+0x1a/0x20 ALSA sound/core/pcm_lib.c:138: XRUN: pcmC0D0p [] snd_pcm_period_elapsed+0x1be/0x3b0 [snd_pcm] [] snd_intel8x0_interrupt+0x18e/0x240 [snd_intel8x0] [] handle_IRQ_event+0x3d/0x70 [] __do_IRQ+0x76/0x100 [] do_IRQ+0x19/0x30 [] common_interrupt+0x1a/0x20 ALSA sound/core/pcm_lib.c:138: XRUN: pcmC0D0p [] snd_pcm_period_elapsed+0x1be/0x3b0 [snd_pcm] [] snd_intel8x0_interrupt+0x18e/0x240 [snd_intel8x0] [] handle_IRQ_event+0x3d/0x70 [] __do_IRQ+0x76/0x100 [] do_IRQ+0x19/0x30 [] common_interrupt+0x1a/0x20 ALSA sound/core/pcm_lib.c:138: XRUN: pcmC0D0p [] snd_pcm_period_elapsed+0x1be/0x3b0 [snd_pcm] [] snd_intel8x0_interrupt+0x18e/0x240 [snd_intel8x0] [] handle_IRQ_event+0x3d/0x70 [] __do_IRQ+0x76/0x100 [] __do_softirq+0x43/0x90 [] do_IRQ+0x19/0x30 [] common_interrupt+0x1a/0x20 ALSA sound/core/pcm_lib.c:138: XRUN: pcmC0D0p [] snd_pcm_period_elapsed+0x1be/0x3b0 [snd_pcm] [] snd_intel8x0_interrupt+0x18e/0x240 [snd_intel8x0] [] handle_IRQ_event+0x3d/0x70 [] __do_IRQ+0x76/0x100 [] sys_sigreturn+0xa5/0xc0 [] do_IRQ+0x19/0x30 [] common_interrupt+0x1a/0x20 ALSA sound/core/pcm_lib.c:138: XRUN: pcmC0D0p [] snd_pcm_period_elapsed+0x1be/0x3b0 [snd_pcm] [] snd_intel8x0_interrupt+0x18e/0x240 [snd_intel8x0] [] handle_IRQ_event+0x3d/0x70 [] __do_IRQ+0x76/0x100 [] __do_softirq+0x43/0x90 [] do_IRQ+0x19/0x30 [] common_interrupt+0x1a/0x20 ALSA sound/core/pcm_lib.c:138: XRUN: pcmC0D0p [] snd_pcm_period_elapsed+0x1be/0x3b0 [snd_pcm] [] snd_intel8x0_interrupt+0x18e/0x240 [snd_intel8x0] [] handle_IRQ_event+0x3d/0x70 [] __do_IRQ+0x76/0x100 [] do_IRQ+0x19/0x30 [] common_interrupt+0x1a/0x20 ALSA sound/core/pcm_lib.c:254: Unexpected hw_pointer value [2] (stream = 0, delta: -1110, max jitter = 4456): wrong interrupt acknowledge? [] snd_pcm_update_hw_ptr+0x139/0x280 [snd_pcm] [] snd_pcm_common_ioctl1+0x42e/0xf80 [snd_pcm] [] schedule+0x315/0x640 [] schedule_timeout+0x4c/0xc0 [] convert_fxsr_to_user+0x11a/0x1d0 [] snd_pcm_playback_ioctl1+0x5f/0x620 [snd_pcm] [] setup_sigcontext+0xe4/0x130 [] do_notify_resume+0x371/0x6e8 [] snd_pcm_kernel_playback_ioctl+0x2c/0x40 [snd_pcm] [] snd_pcm_oss_ioctl+0xa95/0xc10 [snd_pcm_oss] [] do_ioctl+0x35/0xa0 [] vfs_ioctl+0x5d/0x320 [] restore_sigcontext+0x151/0x170 [] sys_ioctl+0x45/0x70 [] syscall_call+0x7/0xb ALSA sound/core/pcm_lib.c:254: Unexpected hw_pointer value [2] (stream = 0, delta: -538, max jitter = 4456): wrong interrupt acknowledge? [] snd_pcm_update_hw_ptr+0x139/0x280 [snd_pcm] [] snd_pcm_common_ioctl1+0x42e/0xf80 [snd_pcm] [] schedule+0x315/0x640 [] schedule_timeout+0x4c/0xc0 [] poll_freewait+0x48/0x60 [] snd_pcm_playback_ioctl1+0x5f/0x620 [snd_pcm] [] snd_pcm_kernel_playback_ioctl+0x2c/0x40 [snd_pcm] [] snd_pcm_oss_ioctl+0xa95/0xc10 [snd_pcm_oss] [] do_ioctl+0x35/0xa0 [] vfs_ioctl+0x5d/0x320 [] sys_select+0x11b/0x200 [] sys_ioctl+0x45/0x70 [] syscall_call+0x7/0xb ALSA sound/core/pcm_lib.c:254: Unexpected hw_pointer value [2] (stream = 0, delta: -593, max jitter = 4456): wrong interrupt acknowledge? [] snd_pcm_update_hw_ptr+0x139/0x280 [snd_pcm] [] snd_pcm_common_ioctl1+0x42e/0xf80 [snd_pcm] [] __do_softirq+0x43/0x90 [] schedule+0x315/0x640 [] schedule_timeout+0x4c/0xc0 [] poll_freewait+0x48/0x60 [] snd_pcm_playback_ioctl1+0x5f/0x620 [snd_pcm] [] snd_pcm_kernel_playback_ioctl+0x2c/0x40 [snd_pcm] [] snd_pcm_oss_ioctl+0xa95/0xc10 [snd_pcm_oss] [] do_ioctl+0x35/0xa0 [] vfs_ioctl+0x5d/0x320 [] sys_select+0x11b/0x200 [] sys_ioctl+0x45/0x70 [] syscall_call+0x7/0xb ALSA sound/core/pcm_lib.c:254: Unexpected hw_pointer value [2] (stream = 0, delta: -538, max jitter = 4456): wrong interrupt acknowledge? [] snd_pcm_update_hw_ptr+0x139/0x280 [snd_pcm] [] snd_pcm_common_ioctl1+0x42e/0xf80 [snd_pcm] [] schedule+0x315/0x640 [] schedule_timeout+0x4c/0xc0 [] poll_freewait+0x48/0x60 [] snd_pcm_playback_ioctl1+0x5f/0x620 [snd_pcm] [] snd_pcm_kernel_playback_ioctl+0x2c/0x40 [snd_pcm] [] snd_pcm_oss_ioctl+0xa95/0xc10 [snd_pcm_oss] [] do_ioctl+0x35/0xa0 [] vfs_ioctl+0x5d/0x320 [] sys_select+0x11b/0x200 [] sys_ioctl+0x45/0x70 [] syscall_call+0x7/0xb ALSA sound/core/pcm_lib.c:138: XRUN: pcmC0D0p [] snd_pcm_period_elapsed+0x1be/0x3b0 [snd_pcm] [] snd_intel8x0_interrupt+0x18e/0x240 [snd_intel8x0] [] handle_IRQ_event+0x3d/0x70 [] __do_IRQ+0x76/0x100 [] __do_softirq+0x43/0x90 [] do_IRQ+0x19/0x30 [] common_interrupt+0x1a/0x20 ALSA sound/core/pcm_lib.c:254: Unexpected hw_pointer value [2] (stream = 0, delta: -523, max jitter = 4456): wrong interrupt acknowledge? [] snd_pcm_update_hw_ptr+0x139/0x280 [snd_pcm] [] snd_pcm_common_ioctl1+0x42e/0xf80 [snd_pcm] [] schedule+0x315/0x640 [] schedule_timeout+0x4c/0xc0 [] poll_freewait+0x48/0x60 [] snd_pcm_playback_ioctl1+0x5f/0x620 [snd_pcm] [] snd_pcm_kernel_playback_ioctl+0x2c/0x40 [snd_pcm] [] snd_pcm_oss_ioctl+0xa95/0xc10 [snd_pcm_oss] [] do_ioctl+0x35/0xa0 [] vfs_ioctl+0x5d/0x320 [] sys_select+0x11b/0x200 [] sys_ioctl+0x45/0x70 [] syscall_call+0x7/0xb