From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1750920AbWFQVVj (ORCPT ); Sat, 17 Jun 2006 17:21:39 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1750925AbWFQVVj (ORCPT ); Sat, 17 Jun 2006 17:21:39 -0400 Received: from fmmailgate02.web.de ([217.72.192.227]:21945 "EHLO fmmailgate02.web.de") by vger.kernel.org with ESMTP id S1750919AbWFQVVi (ORCPT ); Sat, 17 Jun 2006 17:21:38 -0400 From: Christian To: linux-kernel@vger.kernel.org Subject: cosmetical(?) problem with dmraid on 2.6.15 Date: Sat, 17 Jun 2006 23:21:35 +0200 User-Agent: KMail/1.9.1 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200606172321.35386.christiand59@web.de> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hello to all, I'm using the current ubuntu 2.6.15-23-amd64-k8 kernel on a dmraid (nvidia fakeraid RAID0) setup and I'm seeing multiple i/o errors on boot. [ 22.837349] Buffer I/O error on device sda3, logical block 669380224 I think its caused by the kernel not recognizing the fakeraid at that early stage and instead trying to access the partition on /dev/sda directly which won't work since that partition is larger than a single disk. [ 22.790706] sda: sda1 sda2 sda3 [ 22.799932] sd 2:0:0:0: Attached scsi disk sda [ 22.799960] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) [ 22.799971] SCSI device sdb: drive cache: write back [ 22.800001] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) [ 22.800011] SCSI device sdb: drive cache: write back [ 22.800013] sdb: unknown partition table [ 22.807700] sd 3:0:0:0: Attached scsi disk sdb [ 22.837349] Buffer I/O error on device sda3, logical block 669380224 [ 22.837355] Buffer I/O error on device sda3, logical block 669380225 .... However the system seems too run fine so far. -Christian Full dmesg output: user@ubuntu:~$ dmesg [ 0.000000] Bootdata ok (command line is root=/dev/mapper/VolGroup00-LogVol00 ro quiet splash) [ 0.000000] Linux version 2.6.15-23-amd64-k8 (buildd@yellow) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Tue May 23 13:51:32 UTC 2006 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d000 (usable) [ 0.000000] BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f7d70 [ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff3040 [ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff30c0 [ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x000000007fff9900 [ 0.000000] ACPI: SRAT (v001 AMD HAMMER 0x00000001 AMD 0x00000001) @ 0x000000007fff9b00 [ 0.000000] ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff9c00 [ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fff9840 [ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: Node 0 PXM 0 0-a0000 [ 0.000000] SRAT: Node 0 PXM 0 0-80000000 [ 0.000000] Using 63 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fff0000 [ 0.000000] On node 0 totalpages: 516085 [ 0.000000] DMA zone: 3020 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 513065 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages, LIFO batch:0 [ 0.000000] HighMem zone: 0 pages, LIFO batch:0 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to physical flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] Checking aperture... [ 0.000000] CPU 0: aperture @ 4e60000000 size 32 MB [ 0.000000] Aperture from northbridge cpu 0 too small (32 MB) [ 0.000000] No AGP bridge found [ 0.000000] SMP: Allowing 3 CPUs, 1 hotplug CPUs [ 0.000000] Built 1 zonelists [ 0.000000] Kernel command line: root=/dev/mapper/VolGroup00-LogVol00 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes) [ 0.000000] time.c: Using 3.579545 MHz PM timer. [ 0.000000] time.c: Detected 2651.354 MHz processor. [ 19.222482] Console: colour VGA+ 80x25 [ 19.223373] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 19.224697] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 19.239304] Memory: 2053808k/2097088k available (2140k kernel code, 42884k reserved, 750k data, 180k init) [ 19.298391] Calibrating delay using timer specific routine.. 5305.99 BogoMIPS (lpj=2652996) [ 19.298430] Security Framework v1.0.0 initialized [ 19.298434] SELinux: Disabled at boot. [ 19.298450] Mount-cache hash table entries: 256 [ 19.298524] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 19.298527] CPU: L2 Cache: 512K (64 bytes/line) [ 19.298529] CPU 0(2) -> Node 0 -> Core 0 [ 19.298534] mtrr: v2.0 (20020519) [ 19.298539] SMP alternatives: switching to UP code [ 19.298729] checking if image is initramfs... it is [ 19.713000] Freeing initrd memory: 7154k freed [ 19.718561] ACPI: Looking for DSDT ... not found! [ 19.732546] Using local APIC timer interrupts. [ 19.770244] Detected 16.570 MHz APIC timer. [ 19.770330] SMP alternatives: switching to SMP code [ 19.770444] Booting processor 1/2 APIC 0x1 [ 19.779413] Initializing CPU#1 [ 19.839719] Calibrating delay using timer specific routine.. 5301.85 BogoMIPS (lpj=2650929) [ 19.839724] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 19.839725] CPU: L2 Cache: 512K (64 bytes/line) [ 19.839727] CPU 1(2) -> Node 0 -> Core 1 [ 19.839788] AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01 [ 19.839793] CPU 1: Syncing TSC to CPU 0. [ 19.841137] CPU 1: synchronized TSC with CPU 0 (last diff -75 cycles, maxerr 529 cycles) [ 19.841142] Brought up 2 CPUs [ 19.841171] Disabling vsyscall due to use of PM timer [ 19.841173] time.c: Using PM based timekeeping. [ 19.841174] testing NMI watchdog ... OK. [ 19.851420] NET: Registered protocol family 16 [ 19.851440] ACPI: bus type pci registered [ 19.851665] PCI: Using configuration type 1 [ 19.854407] PCI: Using MMCONFIG at e0000000 [ 19.854849] ACPI: Subsystem revision 20051216 [ 19.861621] ACPI: Interpreter enabled [ 19.861623] ACPI: Using IOAPIC for interrupt routing [ 19.862053] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 19.862055] PCI: Probing PCI hardware (bus 00) [ 19.865671] PCI: Transparent bridge - 0000:00:09.0 [ 19.865832] Boot video device is 0000:01:00.0 [ 19.865881] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 19.947202] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 19.948988] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 19.949322] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 19.949651] ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 19.949983] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 19.950319] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 19.950647] ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 19.950984] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 19.951280] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 11 *12 14 15) [ 19.951546] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 19.951811] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 19.952084] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 11 *12 14 15) [ 19.952356] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 19.952626] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 19.952904] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 19.953190] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 19.953466] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 19.953776] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 19.954086] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 19.954396] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 19.954702] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 19.954939] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 19.955262] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. [ 19.955584] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. [ 19.955911] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. [ 19.956236] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. [ 19.956554] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. [ 19.956876] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. [ 19.957202] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. [ 19.957521] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 19.957848] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. [ 19.958186] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. [ 19.958512] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. [ 19.961591] Linux Plug and Play Support v0.97 (c) Adam Belay [ 19.961599] pnp: PnP ACPI init [ 19.967433] pnp: PnP ACPI: found 15 devices [ 19.967445] PCI: Using ACPI for IRQ routing [ 19.967448] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 19.967524] PCI-DMA: Disabling IOMMU. [ 19.967950] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved [ 19.967953] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved [ 19.967955] pnp: 00:00: ioport range 0x4400-0x447f has been reserved [ 19.967957] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved [ 19.967960] pnp: 00:00: ioport range 0x4800-0x487f has been reserved [ 19.967962] pnp: 00:00: ioport range 0x4880-0x48ff has been reserved [ 19.968103] PCI: Bridge: 0000:00:09.0 [ 19.968105] IO window: a000-afff [ 19.968108] MEM window: d3000000-d4ffffff [ 19.968110] PREFETCH window: 88000000-880fffff [ 19.968112] PCI: Bridge: 0000:00:0b.0 [ 19.968113] IO window: disabled. [ 19.968114] MEM window: disabled. [ 19.968116] PREFETCH window: disabled. [ 19.968117] PCI: Bridge: 0000:00:0c.0 [ 19.968118] IO window: disabled. [ 19.968120] MEM window: disabled. [ 19.968121] PREFETCH window: disabled. [ 19.968123] PCI: Bridge: 0000:00:0d.0 [ 19.968126] IO window: disabled. [ 19.968128] MEM window: disabled. [ 19.968129] PREFETCH window: disabled. [ 19.968131] PCI: Bridge: 0000:00:0e.0 [ 19.968133] IO window: 9000-9fff [ 19.968135] MEM window: d0000000-d2ffffff [ 19.968137] PREFETCH window: c0000000-cfffffff [ 19.968142] PCI: Setting latency timer of device 0000:00:09.0 to 64 [ 19.968147] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 19.968150] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 19.968154] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 19.968158] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 19.968367] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ [ 19.968601] audit: initializing netlink socket (disabled) [ 19.968609] audit(1150577259.959:1): initialized [ 19.968726] VFS: Disk quotas dquot_6.5.1 [ 19.968739] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 19.968777] Initializing Cryptographic API [ 19.968779] io scheduler noop registered [ 19.968785] io scheduler anticipatory registered [ 19.968791] io scheduler deadline registered [ 19.968806] io scheduler cfq registered [ 19.969163] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 19.969166] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS [ 19.969178] assign_interrupt_mode Found MSI capability [ 19.969203] Allocate Port Service[pcie00] [ 19.969229] Allocate Port Service[pcie03] [ 19.969254] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 19.969256] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS [ 19.969266] assign_interrupt_mode Found MSI capability [ 19.969278] Allocate Port Service[pcie00] [ 19.969299] Allocate Port Service[pcie03] [ 19.969321] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 19.969323] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS [ 19.969333] assign_interrupt_mode Found MSI capability [ 19.969345] Allocate Port Service[pcie00] [ 19.969368] Allocate Port Service[pcie03] [ 19.969389] PCI: Setting latency timer of device 0000:00:0e.0 to 64 [ 19.969391] pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS [ 19.969401] assign_interrupt_mode Found MSI capability [ 19.969412] Allocate Port Service[pcie00] [ 19.969432] Allocate Port Service[pcie03] [ 19.980313] Real Time Clock Driver v1.12 [ 19.980343] Linux agpgart interface v0.101 (c) Dave Jones [ 19.980420] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 19.980422] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 19.982352] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 19.982566] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 19.982570] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [ 19.982670] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 19.983986] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 19.984338] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 19.984374] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 19.984377] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 19.984490] mice: PS/2 mouse device common for all mice [ 19.984916] NET: Registered protocol family 2 [ 19.998010] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 19.998323] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 20.000415] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 20.000919] TCP: Hash tables configured (established 262144 bind 65536) [ 20.000921] TCP reno registered [ 20.000990] TCP bic registered [ 20.000995] NET: Registered protocol family 1 [ 20.001000] NET: Registered protocol family 8 [ 20.001002] NET: Registered protocol family 20 [ 20.001078] ACPI wakeup devices: [ 20.001080] HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1 [ 20.001084] ACPI: (supports S0 S1 S3 S4 S5) [ 20.001144] Freeing unused kernel memory: 180k freed [ 20.030541] vga16fb: initializing [ 20.030545] vga16fb: mapped to 0xffff8100000a0000 [ 20.158161] Console: switching to colour frame buffer device 80x25 [ 20.158165] fb0: VGA16 VGA frame buffer device [ 20.304976] input: AT Translated Set 2 keyboard as /class/input/input0 [ 21.175689] Capability LSM initialized [ 21.217750] ACPI: Fan [FAN] (on) [ 21.220891] ACPI: Thermal Zone [THRM] (40 C) [ 21.597608] SCSI subsystem initialized [ 21.598758] ACPI: bus type scsi registered [ 21.598760] libata version 1.20 loaded. [ 21.599497] sata_nv 0000:00:07.0: version 0.8 [ 21.599929] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 21.599933] GSI 16 sharing vector 0xD9 and IRQ 16 [ 21.599937] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 217 [ 21.600072] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 21.600147] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD800 irq 217 [ 21.600164] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD808 irq 217 [ 21.800980] ata1: no device found (phy stat 00000000) [ 21.800982] scsi0 : sata_nv [ 22.001854] ata2: no device found (phy stat 00000000) [ 22.001856] scsi1 : sata_nv [ 22.002276] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 [ 22.002280] GSI 17 sharing vector 0xE1 and IRQ 17 [ 22.002283] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 225 [ 22.002394] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 22.002445] ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC400 irq 225 [ 22.002460] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC408 irq 225 [ 22.373711] ata3: dev 0 cfg 00:0040 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3e01 87:4023 88:40ff 93:0000 [ 22.373715] ata3: dev 0 ATA-7, max UDMA7, 488397168 sectors: LBA48 [ 22.377219] sata_get_dev_handle: SATA dev addr=0x80000, handle=0xffff810037fe12c0 [ 22.383347] nv_sata: Primary device added [ 22.383348] nv_sata: Primary device removed [ 22.383349] nv_sata: Secondary device added [ 22.383350] nv_sata: Secondary device removed [ 22.383353] ata3: dev 0 configured for UDMA/133 [ 22.386824] sata_get_dev_handle: SATA dev addr=0x80000, handle=0xffff810037fe12c0 [ 22.392930] scsi2 : sata_nv [ 22.747477] ata4: dev 0 cfg 00:0040 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:bc01 87:4023 88:40ff 93:0000 [ 22.747480] ata4: dev 0 ATA-7, max UDMA7, 488397168 sectors: LBA48 [ 22.750960] sata_get_dev_handle: SATA dev addr=0x80000, handle=0xffff810037fe12c0 [ 22.772684] nv_sata: Primary device added [ 22.772685] nv_sata: Primary device removed [ 22.772686] nv_sata: Secondary device added [ 22.772688] nv_sata: Secondary device removed [ 22.772689] ata4: dev 0 configured for UDMA/133 [ 22.776174] sata_get_dev_handle: SATA dev addr=0x80000, handle=0xffff810037fe12c0 [ 22.782287] scsi3 : sata_nv [ 22.782362] Vendor: ATA Model: SAMSUNG SP2504C Rev: VT10 [ 22.782369] Type: Direct-Access ANSI SCSI revision: 05 [ 22.782422] Vendor: ATA Model: SAMSUNG SP2504C Rev: VT10 [ 22.782427] Type: Direct-Access ANSI SCSI revision: 05 [ 22.783121] NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 [ 22.783136] NFORCE-CK804: chipset revision 242 [ 22.783138] NFORCE-CK804: not 100% native mode: will probe irqs later [ 22.783144] NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller [ 22.783151] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [ 22.783158] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA [ 22.783165] Probing IDE interface ide0... [ 22.787828] Driver 'sd' needs updating - please use bus_type methods [ 22.788442] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 22.788455] SCSI device sda: drive cache: write back [ 22.790249] SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) [ 22.790702] SCSI device sda: drive cache: write back [ 22.790706] sda: sda1 sda2 sda3 [ 22.799932] sd 2:0:0:0: Attached scsi disk sda [ 22.799960] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) [ 22.799971] SCSI device sdb: drive cache: write back [ 22.800001] SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) [ 22.800011] SCSI device sdb: drive cache: write back [ 22.800013] sdb: unknown partition table [ 22.807700] sd 3:0:0:0: Attached scsi disk sdb [ 22.837349] Buffer I/O error on device sda3, logical block 669380224 [ 22.837355] Buffer I/O error on device sda3, logical block 669380225 [ 22.837357] Buffer I/O error on device sda3, logical block 669380226 [ 22.837360] Buffer I/O error on device sda3, logical block 669380227 [ 22.837362] Buffer I/O error on device sda3, logical block 669380228 [ 22.837364] Buffer I/O error on device sda3, logical block 669380229 [ 22.837367] Buffer I/O error on device sda3, logical block 669380230 [ 22.837370] Buffer I/O error on device sda3, logical block 669380231 [ 22.837387] Buffer I/O error on device sda3, logical block 669380224 [ 22.837399] Buffer I/O error on device sda3, logical block 669380225 [ 23.302051] Probing IDE interface ide1... [ 23.973700] hdc: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive [ 24.687255] hdd: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive [ 24.745646] ide1 at 0x170-0x177,0x376 on irq 15 [ 24.767028] hdc: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33) [ 24.767034] Uniform CD-ROM driver Revision: 3.20 [ 24.839319] hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 24.927897] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.48. [ 24.928283] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 [ 24.928287] GSI 18 sharing vector 0xE9 and IRQ 18 [ 24.928291] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 233 [ 24.928296] PCI: Setting latency timer of device 0000:00:0a.0 to 64 [ 24.939176] ieee1394: Initialized config rom entry `ip1394' [ 24.945309] usbcore: registered new driver usbfs [ 24.945324] usbcore: registered new driver hub [ 24.945935] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 24.946299] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 [ 24.946303] GSI 19 sharing vector 0x32 and IRQ 19 [ 24.946307] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (level, low) -> IRQ 50 [ 24.946411] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 24.946415] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 24.958040] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 24.958050] ohci_hcd 0000:00:02.0: irq 50, io mem 0xd5004000 [ 25.010893] hub 1-0:1.0: USB hub found [ 25.010899] hub 1-0:1.0: 10 ports detected [ 25.112229] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 [ 25.112234] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 217 [ 25.112336] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 25.112340] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 25.112366] ehci_hcd 0000:00:02.1: debug port 1 [ 25.112369] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 25.112512] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 25.112518] ehci_hcd 0000:00:02.1: irq 217, io mem 0xfeb00000 [ 25.112524] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 25.112700] hub 2-0:1.0: USB hub found [ 25.112705] hub 2-0:1.0: 10 ports detected [ 25.440737] eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:0a.0 [ 25.440803] ohci1394: $Rev: 1313 $ Ben Collins [ 25.441450] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 25.441456] GSI 20 sharing vector 0x3A and IRQ 20 [ 25.441459] ACPI: PCI Interrupt 0000:05:0b.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 58 [ 25.447570] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 25.491763] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[58] MMIO=[d4008000-d40087ff] Max Packet=[2048] [ 25.514335] Probing IDE interface ide0... [ 25.774509] usb 2-2: new high speed USB device using ehci_hcd and address 3 [ 26.037911] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com [ 26.049360] ohci_hcd 0000:00:02.0: wakeup [ 26.326164] usb 1-4: new low speed USB device using ohci_hcd and address 2 [ 26.477558] usbcore: registered new driver hiddev [ 26.494195] input: HID 1241:1177 as /class/input/input1 [ 26.494267] input: USB HID v1.10 Mouse [HID 1241:1177] on usb-0000:00:02.0-4 [ 26.494275] usbcore: registered new driver usbhid [ 26.494277] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 26.748035] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000077be63] [ 27.057919] cdrom: open failed. [ 27.107152] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 27.107340] SGI XFS Quota Management subsystem [ 27.122431] XFS mounting filesystem dm-4 [ 27.184310] Starting XFS recovery on filesystem: dm-4 (logdev: internal) [ 27.470620] Ending XFS recovery on filesystem: dm-4 (logdev: internal) [ 33.705317] Losing some ticks... checking if CPU frequency changed. [ 34.305832] printk: 72 messages suppressed. [ 34.305835] Buffer I/O error on device sda3, logical block 669380224 [ 34.305840] Buffer I/O error on device sda3, logical block 669380225 [ 34.450288] ts: Compaq touchscreen protocol output [ 34.786121] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 34.786144] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 35.900042] NET: Registered protocol family 17 [ 35.990829] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00 [ 35.990855] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40 [ 36.135030] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 36.160027] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 36.160032] GSI 21 sharing vector 0x42 and IRQ 21 [ 36.160036] ACPI: PCI Interrupt 0000:05:0c.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 66 [ 36.160175] skge 1.3 addr 0xd4000000 irq 66 chip Yukon-Lite rev 9 [ 36.160260] skge eth1: addr 00:15:f2:3f:26:5c [ 36.198485] input: PC Speaker as /class/input/input2 [ 36.225979] Floppy drive(s): fd0 is 1.44M [ 36.227450] parport: PnPBIOS parport detected. [ 36.227494] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 36.241357] FDC 0 is a post-1991 82077 [ 36.243940] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 36.351504] skge eth1: enabling interface [ 36.377733] nvidia: module license 'NVIDIA' taints kernel. [ 36.381030] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 36.381036] GSI 22 sharing vector 0x4A and IRQ 22 [ 36.381040] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 74 [ 36.381047] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 36.381193] NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-8762 Mon May 15 13:58:14 PDT 2006 [ 36.495702] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 [ 36.495707] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 22 (level, low) -> IRQ 225 [ 36.495863] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 36.807612] intel8x0_measure_ac97_clock: measured 50701 usecs [ 36.807615] intel8x0: clocking to 46801 [ 37.202395] it87: Found IT8712F chip at 0x290, revision 7 [ 37.251644] Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k [ 37.435789] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 37.435792] md: bitmap version 4.39 [ 39.064224] cdrom: open failed. [ 39.225341] XFS mounting filesystem dm-6 [ 39.387801] Starting XFS recovery on filesystem: dm-6 (logdev: internal) [ 39.634277] Ending XFS recovery on filesystem: dm-6 (logdev: internal) [ 39.704440] kjournald starting. Commit interval 5 seconds [ 39.704561] EXT3 FS on dm-2, internal journal [ 39.704565] EXT3-fs: mounted filesystem with ordered data mode. [ 39.722235] NTFS driver 2.1.25 [Flags: R/O MODULE]. [ 39.778007] NTFS volume version 3.1. [ 40.140980] NET: Registered protocol family 10 [ 40.141077] lo: Disabled Privacy Extensions [ 40.141381] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 40.141400] IPv6 over IPv4 tunneling driver [ 45.329350] ACPI: Power Button (FF) [PWRF] [ 45.329358] ACPI: Power Button (CM) [PWRB] [ 45.386980] ibm_acpi: ec object not found [ 45.399398] pcc_acpi: loading... [ 45.683045] powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.50.4) [ 45.683118] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8 (1350 mV) [ 45.683122] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa (1300 mV) [ 45.683124] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) [ 45.683128] cpu_init done, current fid 0xc, vid 0x6 [ 45.683936] powernow-k8: ph2 null fid transition 0xc [ 46.260339] lp0: using parport0 (interrupt-driven). [ 46.282539] ppdev: user-space parallel port driver [ 47.753026] printk: 80 messages suppressed. [ 47.753031] Buffer I/O error on device sda3, logical block 669380224 [ 47.753035] Buffer I/O error on device sda3, logical block 669380225 [ 49.727523] Bluetooth: Core ver 2.8 [ 49.727527] NET: Registered protocol family 31 [ 49.727529] Bluetooth: HCI device and connection manager initialized [ 49.727536] Bluetooth: HCI socket layer initialized [ 49.748617] Bluetooth: L2CAP ver 2.8 [ 49.748621] Bluetooth: L2CAP socket layer initialized [ 49.757779] Bluetooth: RFCOMM socket layer initialized [ 49.757792] Bluetooth: RFCOMM TTY layer initialized [ 49.757794] Bluetooth: RFCOMM ver 1.7 [ 50.470115] eth0: no IPv6 routers present [ 51.333124] i2c_adapter i2c-2: SMBus Quick command not supported, can't probe for chips [ 51.333467] i2c_adapter i2c-3: SMBus Quick command not supported, can't probe for chips [ 51.333808] i2c_adapter i2c-4: SMBus Quick command not supported, can't probe for chips [ 487.954085] xfs_db[11607] trap divide error rip:423920 rsp:7fffff993110 error:0 [ 528.214181] xfs_db[11641] trap divide error rip:423920 rsp:7fffffbae120 error:0 [ 539.364718] xfs_db[11653] trap divide error rip:423920 rsp:7fffffbe0d30 error:0