From: Christian Lohmaier <cloph@openoffice.org>
To: Andrew Morton <akpm@osdl.org>
Cc: Jan Engelhardt <jengelh@linux01.gwdg.de>,
linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org,
Christian Lohmaier <lohmaier@gmx.de>
Subject: Re: [Bugme-new] [Bug 6745] New: kernel hangs when trying to read atip wiith cdrecord
Date: Sun, 25 Jun 2006 21:00:48 +0200 [thread overview]
Message-ID: <20060625190048.GA5784@bm617259.muenchen.org> (raw)
In-Reply-To: <20060625043622.e42c7254.akpm@osdl.org>
Hi *, thanks for cc'ing me,
On Sun, Jun 25, 2006 at 04:36:22AM -0700, Andrew Morton wrote:
> On Sun, 25 Jun 2006 13:05:59 +0200 (MEST)
> Jan Engelhardt <jengelh@linux01.gwdg.de> wrote:
>
> > >> Summary: kernel hangs when trying to read atip wiith cdrecord
> > >> Kernel Version: 2.6.16.1
> >
> > >> Most recent kernel where this bug did not occur: 2.6.16.1 (yes, the
> > >> same version - it works with my dvd-burner, but not with my cd-burner),
> > >> the 2.4 series worked with both, but there I have been using ide-scsi)
> >
> > Can you try a newer version and/or (or both) with an original cdrecord (if
> > not already done so) or cdrecord-prodvd?
I tried with 2.6.17.1, but the problem remains (I use original cdrecord)
Since I have a relatively old glibc I cannot use the newer versions of
cdrecord-prodvd, but cdrecord-prodvd-2.01b31-i686-pc-linux-gnu sometimes
works. I did work sometimes, but even when it wors and prints the atip -
compared to using my dvd-recorder it takes ages to print the results.
But now that I tried to double-check, it hung as well. It printed one
additional line after the supported modes, namely:
Drive buf size : 1806336 = 1764 KB
But then hangs. (full output see below)
> > [...]
> > Try -dev=/dev/hdX
That did not make a difference either, apart from the slightly different
warning message at the beginning.
# cdrecord-prodvd-2.01b31-i686-pc-linux-gnu -v dev=ATAPI:1,0,0 -atip
Cdrecord-ProDVD-Clone 2.01b31 (i686-pc-linux-gnu) Copyright (C) 1995-2004 J�rg Schilling
Unlocked features:
Limited features:
TOC Type: 1 = CD-ROM
scsidev: 'ATAPI:1,0,0'
devname: 'ATAPI'
scsibus: 1 target: 0 lun: 0
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'CyberDrv'
Identifikation : 'CW058D CD-R/RW '
Revision : '160D'
Device seems to be: Generic mmc CD-RW.
Current: Removable Disk
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Profile: Removable Disk (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1806336 = 1764 KB
ciao
Christian
--
NP: Limp Bizkit - Re-entry
next prev parent reply other threads:[~2006-06-25 19:00 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200606242036.k5OKaSvp031813@fire-2.osdl.org>
2006-06-24 21:47 ` Andrew Morton
2006-06-25 11:05 ` Jan Engelhardt
2006-06-25 11:36 ` Andrew Morton
2006-06-25 19:00 ` Christian Lohmaier [this message]
2006-06-25 11:07 ` Arjan van de Ven
2006-06-25 11:37 ` Andrew Morton
2006-06-26 18:59 ` Christian Lohmaier
2006-06-25 10:53 Joerg Schilling
2006-06-25 11:06 ` Andrew Morton
2006-06-25 11:46 ` Joerg Schilling
2006-06-25 19:35 ` Joerg Schilling
2006-06-25 19:40 Joerg Schilling
2006-06-26 0:01 ` Christian Lohmaier
2006-06-26 18:21 Joerg Schilling
2006-06-26 18:49 Christian Lohmaier
2006-06-28 7:18 Joerg Schilling
2006-06-28 7:29 Joerg Schilling
2006-06-28 11:19 ` Christian Lohmaier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060625190048.GA5784@bm617259.muenchen.org \
--to=cloph@openoffice.org \
--cc=akpm@osdl.org \
--cc=jengelh@linux01.gwdg.de \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lohmaier@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®