mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Nigel Cunningham <nigel@suspend2.net>
To: linux-kernel@vger.kernel.org
Subject: [Suspend2][ 11/16] [Suspend2] General proc entries for suspend.
Date: Tue, 27 Jun 2006 08:33:52 +1000	[thread overview]
Message-ID: <20060626223351.3832.44436.stgit@nigel.suspend2.net> (raw)
In-Reply-To: <20060626223314.3832.23435.stgit@nigel.suspend2.net>

Implement the proc entries for Suspend2's core - debug_info,
extra_pages_allowance, ignore_rootfs, image_exists, image_size_limit,
last_result, reboot, resume2, resume_commandline, version. If PM_DEBUG is
enabled, there are also entries for testing the freezer, block io, filters
speed, for adding delays at different steps and disabling pageset2. If ACPI
is enabled, the user can select sleep states S3, S4 or S5 as powerdown
methods. Keepimage mode, since it could cause damage if used without
consideration, depends on a compile time option.

Signed-off-by: Nigel Cunningham <nigel@suspend2.net>

 kernel/power/suspend.c |  205 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 205 insertions(+), 0 deletions(-)

diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
index 4eabb21..429d2eb 100644
--- a/kernel/power/suspend.c
+++ b/kernel/power/suspend.c
@@ -691,3 +691,208 @@ static int image_exists_write(struct fil
 	return count;
 }
 
+/*
+ * Core proc entries that aren't built in.
+ *
+ * This array contains entries that are automatically registered at
+ * boot. Modules and the console code register their own entries separately.
+ */
+static struct suspend_proc_data proc_params[] = {
+	{ .filename			= "debug_info",
+	  .permissions			= PROC_READONLY,
+	  .type				= SUSPEND_PROC_DATA_CUSTOM,
+	  .data = {
+		  .special = {
+			  .read_proc	= debuginfo_read_proc,
+		  }
+	  }
+	},
+	
+	{ .filename			= "extra_pages_allowance",
+	  .permissions			= PROC_RW,
+	  .type				= SUSPEND_PROC_DATA_LONG,
+	  .data = {
+		  .a_long = {
+			  .variable	= &extra_pd1_pages_allowance,
+			  .minimum	= 0,
+			  .maximum	= INT_MAX,
+		  }
+	  }
+	},
+	
+	{ .filename			= "ignore_rootfs",
+	  .permissions			= PROC_RW,
+	  .type				= SUSPEND_PROC_DATA_BIT,
+	  .data = {
+		  .bit = {
+			  .bit_vector	= &suspend_action,
+			  .bit		= SUSPEND_IGNORE_ROOTFS,
+		  }
+	  }
+	},
+	
+	{ .filename			= "image_exists",
+	  .permissions			= PROC_RW,
+	  .type				= SUSPEND_PROC_DATA_CUSTOM,
+	  .needs_storage_manager	= 3,
+	  .data = {
+		  .special = {
+			  .read_proc	= image_exists_read,
+			  .write_proc	= image_exists_write,
+		  }
+	  }
+	},
+
+	{ .filename			= "image_size_limit",
+	  .permissions			= PROC_RW,
+	  .type				= SUSPEND_PROC_DATA_LONG,
+	  .data = {
+		  .a_long = {
+			  .variable	= &image_size_limit,
+			  .minimum	= -2,
+			  .maximum	= 32767,
+		  }
+	  }
+	},
+
+	{ .filename			= "last_result",
+	  .permissions			= PROC_READONLY,
+	  .type				= SUSPEND_PROC_DATA_UL,
+	  .data = {
+		  .ul = {
+			  .variable	=  &suspend_result,
+		  }
+	  }
+	},
+	
+	{ .filename			= "reboot",
+	  .permissions			= PROC_RW,
+	  .type				= SUSPEND_PROC_DATA_BIT,
+	  .data = {
+		  .bit = {
+			  .bit_vector	= &suspend_action,
+			  .bit		= SUSPEND_REBOOT,
+		  }
+	  }
+	},
+	  
+	{ .filename			= "resume2",
+	  .permissions			= PROC_RW,
+	  .type				= SUSPEND_PROC_DATA_STRING,
+	  .needs_storage_manager	= 2,
+	  .data = {
+		  .string = {
+			  .variable	= resume2_file,
+			  .max_length	= 255,
+		  }
+	  },
+	  .write_proc			= attempt_to_parse_resume_device2,
+	},
+
+	{ .filename			= "resume_commandline",
+	  .permissions			= PROC_RW,
+	  .type				= SUSPEND_PROC_DATA_STRING,
+	  .data = {
+		  .string = {
+			  .variable	= suspend_resume_commandline,
+			  .max_length	= COMMAND_LINE_SIZE,
+		  }
+	  },
+	},
+
+	{ .filename			= "version",
+	  .permissions			= PROC_READONLY,
+	  .type				= SUSPEND_PROC_DATA_STRING,
+	  .data = {
+		  .string = {
+			  .variable	= suspend_core_version,
+		  }
+	  }
+	},
+
+#ifdef CONFIG_PM_DEBUG
+	{ .filename			= "freezer_test",
+	  .permissions			= PROC_RW,
+	  .type				= SUSPEND_PROC_DATA_BIT,
+	  .data = {
+		  .bit = {
+			  .bit_vector	= &suspend_action,
+			  .bit		= SUSPEND_FREEZER_TEST,
+		  }
+	  }
+	},
+
+	{ .filename			= "test_bio",
+	  .permissions			= PROC_RW,
+	  .type				= SUSPEND_PROC_DATA_BIT,
+	  .data = {
+		  .bit = {
+			  .bit_vector	= &suspend_action,
+			  .bit		= SUSPEND_TEST_BIO,
+		  }
+	  }
+	},
+
+	{ .filename			= "test_filter_speed",
+	  .permissions			= PROC_RW,
+	  .type				= SUSPEND_PROC_DATA_BIT,
+	  .data = {
+		  .bit = {
+			  .bit_vector	= &suspend_action,
+			  .bit		= SUSPEND_TEST_FILTER_SPEED,
+		  }
+	  }
+	},
+
+	{ .filename			= "slow",
+	  .permissions			= PROC_RW,
+	  .type				= SUSPEND_PROC_DATA_BIT,
+	  .data = {
+		  .bit = {
+			  .bit_vector	= &suspend_action,
+			  .bit		= SUSPEND_SLOW,
+		  }
+	  }
+	},
+	
+	{ .filename			= "no_pageset2",
+	  .permissions			= PROC_RW,
+	  .type				= SUSPEND_PROC_DATA_BIT,
+	  .data = {
+		  .bit = {
+			  .bit_vector	= &suspend_action,
+			  .bit		= SUSPEND_NO_PAGESET2,
+		  }
+	  }
+	},
+	
+#endif
+	  
+#if defined(CONFIG_ACPI)
+	{ .filename			= "powerdown_method",
+	  .permissions			= PROC_RW,
+	  .type				= SUSPEND_PROC_DATA_UL,
+	  .data = {
+		  .ul = {
+			  .variable	= &suspend_powerdown_method,
+			  .minimum	= 0,
+			  .maximum	= 5,
+		  }
+	  }
+	},
+#endif
+
+#ifdef CONFIG_SUSPEND2_KEEP_IMAGE
+	{ .filename			= "keep_image",
+	  .permissions			= PROC_RW,
+	  .type				= SUSPEND_PROC_DATA_BIT,
+	  .data = {
+		  .bit = {
+			  .bit_vector	= &suspend_action,
+			  .bit		= SUSPEND_KEEP_IMAGE,
+		  }
+	  }
+	},
+#endif
+};
+       

--
Nigel Cunningham		nigel at suspend2 dot net

  parent reply	other threads:[~2006-06-26 23:45 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-06-26 22:33 [Suspend2][ 00/16] Suspend.c Nigel Cunningham
2006-06-26 22:33 ` [Suspend2][ 01/16] [Suspend2] Suspend.c header Nigel Cunningham
2006-06-26 22:33 ` [Suspend2][ 02/16] [Suspend2] Routines called when starting or finishing anything Nigel Cunningham
2006-06-26 22:33 ` [Suspend2][ 03/16] [Suspend2] Save image Nigel Cunningham
2006-06-26 22:33 ` [Suspend2][ 04/16] [Suspend2] Get debug info Nigel Cunningham
2006-06-26 22:33 ` [Suspend2][ 05/16] [Suspend2] Allocate/free bitmaps Nigel Cunningham
2006-06-26 22:33 ` [Suspend2][ 06/16] [Suspend2] Check if still keeping an existing image Nigel Cunningham
2006-06-26 22:33 ` [Suspend2][ 07/16] [Suspend2] Suspend2 init/cleanup Nigel Cunningham
2006-06-26 22:33 ` [Suspend2][ 08/16] [Suspend2] Can suspend? Nigel Cunningham
2006-06-26 22:33 ` [Suspend2][ 09/16] [Suspend2] Top level routine for do_suspend Nigel Cunningham
2006-06-26 22:33 ` [Suspend2][ 10/16] [Suspend2] Image exists proc entry Nigel Cunningham
2006-06-26 22:33 ` Nigel Cunningham [this message]
2006-06-26 22:33 ` [Suspend2][ 12/16] [Suspend2] Core load routine Nigel Cunningham
2006-06-26 22:34 ` [Suspend2][ 13/16] [Suspend2] do_resume routine Nigel Cunningham
2006-06-26 22:34 ` [Suspend2][ 14/16] [Suspend2] Try to suspend Nigel Cunningham
2006-06-26 22:34 ` [Suspend2][ 15/16] [Suspend2] __init routines Nigel Cunningham
2006-06-26 22:34 ` [Suspend2][ 16/16] [Suspend2] Suspend,c header file Nigel Cunningham

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20060626223351.3832.44436.stgit@nigel.suspend2.net \
    --to=nigel@suspend2.net \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome