mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Nigel Cunningham <nigel@suspend2.net>
To: linux-kernel@vger.kernel.org
Subject: [Suspend2][ 01/28] [Suspend2] Swapwriter.c header.
Date: Tue, 27 Jun 2006 08:41:09 +1000	[thread overview]
Message-ID: <20060626224107.4975.5382.stgit@nigel.suspend2.net> (raw)
In-Reply-To: <20060626224105.4975.90758.stgit@nigel.suspend2.net>

Header for kernel/power/suspend_swap.c.

Signed-off-by: Nigel Cunningham <nigel@suspend2.net>

 kernel/power/suspend_swap.c |   89 +++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 89 insertions(+), 0 deletions(-)

diff --git a/kernel/power/suspend_swap.c b/kernel/power/suspend_swap.c
new file mode 100644
index 0000000..7732a75
--- /dev/null
+++ b/kernel/power/suspend_swap.c
@@ -0,0 +1,89 @@
+/*
+ * Swapwriter.c
+ *
+ * Copyright 2004-2006 Nigel Cunningham <nigel@suspend2.net>
+ *
+ * Distributed under GPLv2.
+ * 
+ * This file encapsulates functions for usage of swap space as a
+ * backing store.
+ */
+
+#include <linux/suspend.h>
+#include <linux/module.h>
+#include <linux/blkdev.h>
+#include <linux/swapops.h>
+#include <linux/swap.h>
+
+#include "suspend2.h"
+#include "suspend2_common.h"
+#include "version.h"
+#include "proc.h"
+#include "modules.h"
+#include "io.h"
+#include "ui.h"
+#include "extent.h"
+#include "block_io.h"
+
+static struct suspend_module_ops swapwriterops;
+
+#define SIGNATURE_VER 6
+
+/* --- Struct of pages stored on disk */
+
+union diskpage {
+	union swap_header swh;	/* swh.magic is the only member used */
+};
+
+union p_diskpage {
+	union diskpage *pointer;
+	char *ptr;
+        unsigned long address;
+};
+
+/* Devices used for swap */
+static struct suspend_bdev_info devinfo[MAX_SWAPFILES];
+
+/* Extent chains for swap & blocks */
+struct extent_chain swapextents;
+struct extent_chain block_chain[MAX_SWAPFILES];
+
+static dev_t header_dev_t;
+static struct block_device *header_block_device;
+static unsigned long headerblock;
+
+/* For swapfile automatically swapon/off'd. */
+static char swapfilename[SWAP_FILENAME_MAXLENGTH] = "";
+extern asmlinkage long sys_swapon(const char *specialfile, int swap_flags);
+extern asmlinkage long sys_swapoff(const char *specialfile);
+static int suspend_swapon_status;
+
+/* Header Page Information */
+static int header_pages_allocated;
+
+/* User Specified Parameters. */
+
+static unsigned long resume_firstblock;
+static int resume_blocksize;
+static dev_t resume_dev_t;
+static struct block_device *resume_block_device;
+
+struct sysinfo swapinfo;
+static int swapwriter_invalidate_image(void);
+
+/* Block devices open. */
+struct bdev_opened
+{
+	dev_t device;
+	struct block_device *bdev;
+	int claimed;
+};
+
+/* 
+ * Entry MAX_SWAPFILES is the resume block device, which may
+ * not be a swap device enabled when we suspend.
+ * Entry MAX_SWAPFILES + 1 is the header block device, which
+ * is needed before we find out which slot it occupies.
+ */
+static struct bdev_opened *bdev_info_list[MAX_SWAPFILES + 2];
+       

--
Nigel Cunningham		nigel at suspend2 dot net

  reply	other threads:[~2006-06-26 22:52 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-06-26 22:41 [Suspend2][ 00/28] Swapwriter Nigel Cunningham
2006-06-26 22:41 ` Nigel Cunningham [this message]
2006-06-26 22:41 ` [Suspend2][ 02/28] [Suspend2] Close a bdev used by the swapwriter Nigel Cunningham
2006-06-26 22:41 ` [Suspend2][ 03/28] [Suspend2] Close bdevs opened " Nigel Cunningham
2006-06-26 22:41 ` [Suspend2][ 04/28] [Suspend2] Open bdev for swapwriter use Nigel Cunningham
2006-06-26 22:41 ` [Suspend2][ 05/28] [Suspend2] Enable/disable swapfile Nigel Cunningham
2006-06-26 22:41 ` [Suspend2][ 06/28] [Suspend2] Try to parse resume2= for swapwriter Nigel Cunningham
2006-06-26 22:41 ` [Suspend2][ 07/28] [Suspend2] Reset swapwriter when not resuming Nigel Cunningham
2006-06-26 22:41 ` [Suspend2][ 08/28] [Suspend2] Parse swapwriter signature Nigel Cunningham
2006-06-26 22:41 ` [Suspend2][ 09/28] [Suspend2] Prepare " Nigel Cunningham
2006-06-26 22:41 ` [Suspend2][ 10/28] [Suspend2] Allocate swapwriter header space Nigel Cunningham
2006-06-26 22:41 ` [Suspend2][ 11/28] [Suspend2] Get block chains for swapwriter Nigel Cunningham
2006-06-26 22:41 ` [Suspend2][ 12/28] [Suspend2] Swapwriter storage allocated and available Nigel Cunningham
2006-06-26 22:41 ` [Suspend2][ 13/28] [Suspend2] Initialise/cleanup swapwriter Nigel Cunningham
2006-06-26 22:41 ` [Suspend2][ 14/28] [Suspend2] Release swapwriter storage Nigel Cunningham
2006-06-26 22:41 ` [Suspend2][ 15/28] [Suspend2] Allocate " Nigel Cunningham
2006-06-26 22:42 ` [Suspend2][ 16/28] [Suspend2] Initialise/cleanup writing the header Nigel Cunningham
2006-06-26 22:42 ` [Suspend2][ 17/28] [Suspend2] Swapwriter read image header init/cleanup Nigel Cunningham
2006-06-26 22:42 ` [Suspend2][ 18/28] [Suspend2] Invalidate swapwriter image Nigel Cunningham
2006-06-26 22:42 ` [Suspend2][ 19/28] [Suspend2] Swapwriter memory needed Nigel Cunningham
2006-06-26 22:42 ` [Suspend2][ 20/28] [Suspend2] Get swapwriter debug info Nigel Cunningham
2006-06-26 22:42 ` [Suspend2][ 21/28] [Suspend2] Get swapwriter image storage needed Nigel Cunningham
2006-06-26 22:42 ` [Suspend2][ 22/28] [Suspend2] Does a swapwriter image exist? Nigel Cunningham
2006-06-26 22:42 ` [Suspend2][ 23/28] [Suspend2] Swapwriter mark resume attempted Nigel Cunningham
2006-06-26 22:42 ` [Suspend2][ 24/28] [Suspend2] Swapwriter parse resume2= Nigel Cunningham
2006-06-26 22:42 ` [Suspend2][ 25/28] [Suspend2] Read resume2= values for currently enabled swap Nigel Cunningham
2006-06-26 22:42 ` [Suspend2][ 26/28] [Suspend2] Swapwriter proc entries Nigel Cunningham
2006-06-26 22:42 ` [Suspend2][ 27/28] [Suspend2] Swapwriter ops Nigel Cunningham
2006-06-26 22:42 ` [Suspend2][ 28/28] [Suspend2] Swapwriter load and unload routines Nigel Cunningham

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20060626224107.4975.5382.stgit@nigel.suspend2.net \
    --to=nigel@suspend2.net \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®