From: "Randy.Dunlap" <rdunlap@xenotime.net>
To: linux-fbdev-devel@lists.sourceforge.net
Cc: jonsmirl@gmail.com, adaplas@gmail.com, linux-kernel@vger.kernel.org
Subject: Re: [Linux-fbdev-devel] [PATCH, trivial] Remove about 50 unneeded #includes in fbdev
Date: Tue, 27 Jun 2006 09:51:27 -0700 [thread overview]
Message-ID: <20060627095127.441c543e.rdunlap@xenotime.net> (raw)
In-Reply-To: <9e4733910606270919n7819dbc0g8bd5c99f4b911583@mail.gmail.com>
On Tue, 27 Jun 2006 12:19:07 -0400 Jon Smirl wrote:
> Remove about 50 unneeded #includes in fbdev
Does this that
(a) these drivers build without these header files explicitly #included
or
(b) these drivers don't use *any* APIs or data from these header files?
They may build (a) but still use the APIs, so (b) is the requirement/target.
(I.e., other header files could suck in the required headers.)
> Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
>
> diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/aty/aty128fb.c
> index db878fd..e498a54 100644
> --- a/drivers/video/aty/aty128fb.c
> +++ b/drivers/video/aty/aty128fb.c
> @@ -46,26 +46,14 @@
> */
>
>
> -#include <linux/config.h>
> #include <linux/module.h>
> #include <linux/moduleparam.h>
> -#include <linux/kernel.h>
> #include <linux/errno.h>
> -#include <linux/string.h>
> -#include <linux/mm.h>
> -#include <linux/tty.h>
> -#include <linux/slab.h>
> -#include <linux/vmalloc.h>
> #include <linux/delay.h>
> -#include <linux/interrupt.h>
> #include <asm/uaccess.h>
> #include <linux/fb.h>
> -#include <linux/init.h>
> #include <linux/pci.h>
> -#include <linux/ioport.h>
> #include <linux/console.h>
> -#include <linux/backlight.h>
> -#include <asm/io.h>
>
> #ifdef CONFIG_PPC_PMAC
> #include <asm/machdep.h>
> diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
> index c5185f7..5f4c76c 100644
> --- a/drivers/video/aty/atyfb_base.c
> +++ b/drivers/video/aty/atyfb_base.c
> @@ -49,26 +49,13 @@
> ******************************************************************************/
>
>
> -#include <linux/config.h>
> -#include <linux/module.h>
> -#include <linux/moduleparam.h>
> -#include <linux/kernel.h>
> -#include <linux/errno.h>
> -#include <linux/string.h>
> -#include <linux/mm.h>
> -#include <linux/slab.h>
> -#include <linux/vmalloc.h>
> #include <linux/delay.h>
> #include <linux/console.h>
> #include <linux/fb.h>
> -#include <linux/init.h>
> #include <linux/pci.h>
> #include <linux/interrupt.h>
> -#include <linux/spinlock.h>
> -#include <linux/wait.h>
> #include <linux/backlight.h>
>
> -#include <asm/io.h>
> #include <asm/uaccess.h>
>
> #include <video/mach64.h>
> diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
> index c5ecbb0..56445ea 100644
> --- a/drivers/video/aty/radeon_base.c
> +++ b/drivers/video/aty/radeon_base.c
> @@ -52,25 +52,6 @@
>
> #define RADEON_VERSION "0.2.0"
>
> -#include <linux/config.h>
> -#include <linux/module.h>
> -#include <linux/moduleparam.h>
> -#include <linux/kernel.h>
> -#include <linux/errno.h>
> -#include <linux/string.h>
> -#include <linux/mm.h>
> -#include <linux/tty.h>
> -#include <linux/slab.h>
> -#include <linux/delay.h>
> -#include <linux/time.h>
> -#include <linux/fb.h>
> -#include <linux/ioport.h>
> -#include <linux/init.h>
> -#include <linux/pci.h>
> -#include <linux/vmalloc.h>
> -#include <linux/device.h>
> -
> -#include <asm/io.h>
> #include <asm/uaccess.h>
>
> #ifdef CONFIG_PPC_OF
> diff --git a/drivers/video/aty/radeon_i2c.c b/drivers/video/aty/radeon_i2c.c
> index a9d0414..4855c0a 100644
> --- a/drivers/video/aty/radeon_i2c.c
> +++ b/drivers/video/aty/radeon_i2c.c
> @@ -1,9 +1,3 @@
> -#include <linux/config.h>
> -#include <linux/module.h>
> -#include <linux/kernel.h>
> -#include <linux/sched.h>
> -#include <linux/delay.h>
> -#include <linux/pci.h>
> #include <linux/fb.h>
>
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Linux-fbdev-devel mailing list
> Linux-fbdev-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/linux-fbdev-devel
>
---
~Randy
next prev parent reply other threads:[~2006-06-27 16:48 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-27 16:19 Jon Smirl
2006-06-27 16:51 ` Randy.Dunlap [this message]
[not found] ` <9e4733910606271001u2794d1e3ocb123f3cf9476266@mail.gmail.com>
2006-06-27 17:25 ` [Linux-fbdev-devel] " Randy.Dunlap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060627095127.441c543e.rdunlap@xenotime.net \
--to=rdunlap@xenotime.net \
--cc=adaplas@gmail.com \
--cc=jonsmirl@gmail.com \
--cc=linux-fbdev-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®