mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.17-mm3 - mutex warning in usbhid, battery problem, and slab corruption
Date: Wed, 28 Jun 2006 14:03:33 +0200	[thread overview]
Message-ID: <200606281403.33190.rjw@sisk.pl> (raw)
In-Reply-To: <20060627015211.ce480da6.akpm@osdl.org>

On Tuesday 27 June 2006 10:52, Andrew Morton wrote:
> 
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.17/2.6.17-mm3/

I have three problems with this kernel.

First, there's a mutex lock warning as in the appended trace and my USB
mouse doesn't work.

Second, kpowersave is apparently unable to get the battery status,
although the data in /proc/acpi/battery/BAT0/ seem to be correct
(this also happened with 2.6.17-mm2, but it did not happen with
2.6.17-rc6-mm2).

Finally, I'm still seeing slab corruptions in dmesg (eg. at the end of the
appended trace).

Greetings,
Rafael


  usbdev2.4_ep81: ep_device_release called for usbdev2.4_ep81
 BUG: warning at kernel/mutex.c:132/__mutex_lock_common()
 
 Call Trace:
  [<ffffffff8020ab6f>] show_trace+0x9f/0x240
  [<ffffffff8020af45>] dump_stack+0x15/0x20
  [<ffffffff8047296b>] __mutex_lock_slowpath+0xab/0x280
  [<ffffffff80472b49>] mutex_lock+0x9/0x10
  [<ffffffff803ed909>] input_unregister_device+0x109/0x160
  [<ffffffff88157ab2>] :usbhid:hidinput_disconnect+0x72/0xa0
  [<ffffffff88153d3d>] :usbhid:hid_disconnect+0x9d/0x110
  [<ffffffff803dd85b>] usb_unbind_interface+0x5b/0xb0
  [<ffffffff803bb03d>] __device_release_driver+0x8d/0xb0
  [<ffffffff803bb324>] device_release_driver+0x34/0x50
  [<ffffffff803ba6af>] bus_remove_device+0xaf/0xe0
  [<ffffffff803b9067>] device_del+0x157/0x1a0
  [<ffffffff803dc548>] usb_disable_device+0x108/0x1a0
  [<ffffffff803d44e2>] usb_disconnect+0xd2/0x150
  [<ffffffff803d7c0f>] hub_thread+0x63f/0xff0
  [<ffffffff802435c9>] kthread+0xd9/0x110
  [<ffffffff8020a34a>] child_rip+0x8/0x12
 general protection fault: 0000 [1] PREEMPT 
 last sysfs file: /power/state
 CPU 0 
 Modules linked in: usbserial asus_acpi thermal processor fan button battery ac af_packet snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device bcm43xx ieee80211softmac ieee80211 ieee80211_crypt pcmcia firmware_class ohci1394 ieee1394 sk98lin yenta_socket rsrc_nonstatic pcmcia_core ip6t_REJECT xt_tcpudp ipt_REJECT xt_state iptable_mangle iptable_nat ip_nat iptable_filter usbhid ip6table_mangle ip_conntrack snd_intel8x0 ip_tables snd_ac97_codec snd_ac97_bus snd_pcm snd_timer snd soundcore snd_page_alloc ip6table_filter ip6_tables x_tables ehci_hcd i2c_nforce2 i2c_core ohci_hcd parport_pc lp parport ipv6 dm_mod
 Pid: 110, comm: khubd Not tainted 2.6.17-mm3 #1
 RIP: 0010:[<ffffffff804729b8>]  [<ffffffff804729b8>] __mutex_lock_slowpath+0xf8/0x280
 RSP: 0000:ffff810037e83b58  EFLAGS: 00010046
 RAX: 6b6b6b6b6b6b6b6b RBX: ffff810057d417e0 RCX: 0000000000000000
 RDX: ffff810037e82000 RSI: ffff810037e83b58 RDI: ffff810057d417e0
 RBP: ffff810037e83bb8 R08: 0000000000000002 R09: 0000000000000001
 R10: 0000000000000000 R11: ffffffff80527530 R12: 0000000000000246
 R13: ffff810037f7d040 R14: ffff810057d418a0 R15: ffff810037e83b58
 FS:  00002ba97bcadb00(0000) GS:ffffffff808e6000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
 CR2: 000000000051b2d4 CR3: 0000000059515000 CR4: 00000000000006e0
 Process khubd (pid: 110, threadinfo ffff810037e82000, task ffff810037f7d040)
 Stack:  ffff810057d418a0 ffff810037e83b58 1111111111111111 ffff810057d417e0
  ffff810037e83b58 ffff810057d41000 ffff810037e83b98 ffff810057d417e0
  ffff810057d41000 ffff810057d41ae0 ffff81005f26d088 ffff81005f26d088
 Call Trace:
  [<ffffffff80472b49>] mutex_lock+0x9/0x10
  [<ffffffff803ed909>] input_unregister_device+0x109/0x160
  [<ffffffff88157ab2>] :usbhid:hidinput_disconnect+0x72/0xa0
  [<ffffffff88153d3d>] :usbhid:hid_disconnect+0x9d/0x110
  [<ffffffff803dd85b>] usb_unbind_interface+0x5b/0xb0
  [<ffffffff803bb03d>] __device_release_driver+0x8d/0xb0
  [<ffffffff803bb324>] device_release_driver+0x34/0x50
  [<ffffffff803ba6af>] bus_remove_device+0xaf/0xe0
  [<ffffffff803b9067>] device_del+0x157/0x1a0
  [<ffffffff803dc548>] usb_disable_device+0x108/0x1a0
  [<ffffffff803d44e2>] usb_disconnect+0xd2/0x150
  [<ffffffff803d7c0f>] hub_thread+0x63f/0xff0
  [<ffffffff802435c9>] kthread+0xd9/0x110
  [<ffffffff8020a34a>] child_rip+0x8/0x12
 
 Code: 4c 89 38 48 89 45 a8 4c 89 6d b0 48 c7 c0 ff ff ff ff 87 03 
 RIP  [<ffffffff804729b8>] __mutex_lock_slowpath+0xf8/0x280
  RSP <ffff810037e83b58>

  <3>Slab corruption: start=ffff810057d41000, len=4096
 7e0: 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b
 8a0: 6b 6b 6b 6b 6b 6b 6b 6b 58 3b e8 37 00 81 ff ff

  parent reply	other threads:[~2006-06-28 12:03 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-06-27  8:52 2.6.17-mm3 Andrew Morton
2006-06-27  9:14 ` 2.6.17-mm3: no help text for READAHEAD_ALLOW_OVERHEADS Adrian Bunk
     [not found]   ` <20060627134337.GA6117@mail.ustc.edu.cn>
2006-06-27 13:43     ` Wu Fengguang
2006-06-27 14:40     ` Adrian Bunk
     [not found]       ` <20060627155227.GA6014@mail.ustc.edu.cn>
2006-06-27 15:52         ` Wu Fengguang
2006-06-27 17:46       ` Randy.Dunlap
2006-06-27 17:55         ` Adrian Bunk
2006-06-27  9:28 ` [patch] irq: fix arch/i386/kernel/irq.c gcc warning Ingo Molnar
2006-06-27 11:06   ` Björn Steinbrink
2006-06-27 11:14 ` x86_64-mm-ieee1394-early.patch (was Re: 2.6.17-mm3) Stefan Richter
2006-06-27 11:17 ` 2.6.17-mm3 Reuben Farrelly
2006-06-27 11:48 ` 2.6.17-mm3 Reuben Farrelly
2006-06-27 14:12 ` 2.6.17-mm3 Michal Piotrowski
2006-06-27 21:38 ` 2.6.17-mm3 Steve Fox
2006-06-27 23:12   ` 2.6.17-mm3 Martin Bligh
2006-06-27 22:40 ` 2.6.17-mm3: arm: *_irq_wake compile error Adrian Bunk
2006-06-28  7:09   ` Thomas Gleixner
2006-06-28  7:12     ` Andrew Morton
2006-06-28  7:20       ` Thomas Gleixner
2006-06-28  8:13         ` Ingo Molnar
2006-06-28  8:30           ` [patch] genirq: rename desc->handler to desc->chip, sparc64 fix Ingo Molnar
2006-06-28  8:39             ` David Miller
2006-06-28  8:48               ` Andrew Morton
2006-06-28  8:47                 ` Ingo Molnar
2006-06-28  9:24                 ` David Miller
2006-06-29  4:58                 ` Paul Mackerras
2006-06-29  6:42                   ` Ingo Molnar
2006-06-28 12:03 ` Rafael J. Wysocki [this message]
2006-06-28 12:09   ` 2.6.17-mm3 - mutex warning in usbhid, battery problem, and slab corruption Andrew Morton
2006-06-28 14:14 ` 2.6.17-mm3 Cedric Le Goater
2006-06-28 16:54 ` [-mm patch] make drivers/scsi/aic7xxx/aic79xx_core.:ahd_set_tags() static Adrian Bunk
2006-06-28 16:54 ` [-mm patch] kernel/rcutorture.c: make code static Adrian Bunk
2006-06-28 17:13   ` Paul E. McKenney
2006-06-28 17:17     ` Adrian Bunk
2006-06-28 17:49       ` Paul E. McKenney
2006-06-28 20:18   ` Paul E. McKenney
2006-06-28 16:55 ` [-mm patch] kernel/lockdep.c: possible cleanups Adrian Bunk
2006-06-29 13:49   ` Ingo Molnar
2006-06-28 16:55 ` [-mm patch] fs/ecryptfs/: " Adrian Bunk
2006-06-28 18:40   ` Michael Halcrow

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200606281403.33190.rjw@sisk.pl \
    --to=rjw@sisk.pl \
    --cc=akpm@osdl.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®