From: Matt LaPlante <laplam@rpi.edu>
To: linux-kernel@vger.kernel.org
Cc: trivial@kernel.org, Alan Cox <alan@lxorguk.ukuu.org.uk>
Subject: [PATCH] Documentation/IPMI typos
Date: Thu, 29 Jun 2006 13:42:21 -0400 [thread overview]
Message-ID: <20060629134221.9460671e.laplam@rpi.edu> (raw)
Two typos in Documentation/IPMI... Alan, if you could just verify the first please.
--
Matt LaPlante
CCNP, CCDP, A+, Linux+, CQS
laplam@rpi.edu
-
--- b/Documentation/IPMI.txt 2006-06-29 01:36:01.000000000 -0400
+++ a/Documentation/IPMI.txt 2006-06-29 01:40:21.000000000 -0400
@@ -10,7 +10,7 @@
It provides for dynamic discovery of sensors in the system and the
ability to monitor the sensors and be informed when the sensor's
values change or go outside certain boundaries. It also has a
-standardized database for field-replacable units (FRUs) and a watchdog
+standardized database for field-replaceable units (FRUs) and a watchdog
timer.
To use this, you need an interface to an IPMI controller in your
@@ -64,7 +64,7 @@
IPMI defines a standard watchdog timer. You can enable this with the
'IPMI Watchdog Timer' config option. If you compile the driver into
the kernel, then via a kernel command-line option you can have the
-watchdog timer start as soon as it intitializes. It also have a lot
+watchdog timer start as soon as it initializes. It also have a lot
of other options, see the 'Watchdog' section below for more details.
Note that you can also have the watchdog continue to run if it is
closed (by default it is disabled on close). Go into the 'Watchdog
next reply other threads:[~2006-06-29 17:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-06-29 17:42 Matt LaPlante [this message]
2006-06-29 21:57 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060629134221.9460671e.laplam@rpi.edu \
--to=laplam@rpi.edu \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=trivial@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®