Linux version 2.6.17-gee84a7fd-dirty (pavel@amd) (gcc version 4.0.4 20060507 (prerelease) (Debian 4.0.3-3)) #277 SMP Thu Jun 29 13:12:52 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000005ff60000 (usable) BIOS-e820: 000000005ff60000 - 000000005ff77000 (ACPI data) BIOS-e820: 000000005ff77000 - 000000005ff79000 (ACPI NVS) BIOS-e820: 000000005ff80000 - 0000000060000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 639MB HIGHMEM available. 896MB LOWMEM available. On node 0 totalpages: 393056 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 163680 pages, LIFO batch:31 DMI present. ACPI: RSDP (v002 IBM ) @ 0x000f6df0 ACPI: XSDT (v001 IBM TP-1Q 0x00003004 LTP 0x00000000) @ 0x5ff69e78 ACPI: FADT (v003 IBM TP-1Q 0x00003004 IBM 0x00000001) @ 0x5ff69f00 ACPI: SSDT (v001 IBM TP-1Q 0x00003004 MSFT 0x0100000e) @ 0x5ff6a0b4 ACPI: ECDT (v001 IBM TP-1Q 0x00003004 IBM 0x00000001) @ 0x5ff76e11 ACPI: TCPA (v001 IBM TP-1Q 0x00003004 PTL 0x00000001) @ 0x5ff76e63 ACPI: BOOT (v001 IBM TP-1Q 0x00003004 LTP 0x00000001) @ 0x5ff76fd8 ACPI: DSDT (v001 IBM TP-1Q 0x00003004 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 70000000 (gap: 60000000:9f800000) Detected 1798.533 MHz processor. Built 1 zonelists. Total pages: 393056 Kernel command line: root=/dev/hda4 resume=/dev/hda1 psmouse.psmouse_proto=imps psmouse_proto=imps psmouse.proto=imps vga=1 init=/tmp/swsusp-init Unknown boot option `psmouse.psmouse_proto=imps': ignoring Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (01c0f000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x50 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1549136k/1572224k available (5159k kernel code, 22048k reserved, 1889k data, 296k init, 654720k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3599.31 BogoMIPS (lpj=7198622) Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9f9bf 00000000 00000000 00000040 00000180 00000000 00000000 Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 24k freed ACPI: Core revision 20060608 tbxface-0107 [02] load_tables : ACPI Tables successfully acquired Parsing all Control Methods: Table [DSDT](id 0006) - 1407 Objects with 65 Devices 442 Methods 19 Regions Parsing all Control Methods: Table [SSDT](id 0004) - 1 Objects with 0 Devices 1 Methods 0 Regions ACPI Namespace successfully loaded at root c093ba30 ACPI: setting ELCR to 0200 (from 0800) evxfevnt-0089 [03] enable : Transition to ACPI mode successful CPU0: Intel(R) Pentium(R) M processor 1.80GHz stepping 06 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs migration_cost=0 PM: Adding info for No Bus:platform NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 Setting up standard PCI resources evgpeblk-0951 [06] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-1048 [05] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 0 Runtime GPEs in this block ACPI: Found ECDT Completing Region/Field/Buffer/Package initialization:................................................................................................................................................................................................................................................. Initialized 18/19 Regions 123/123 Fields 58/58 Buffers 42/49 Packages (1417 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:........... Executed 11 _INI methods requiring 3 _STA executions (examined 69 objects) ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing PM: Adding info for acpi:acpi ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PM: Adding info for No Bus:pci0000:00 PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] PM: Adding info for pci:0000:00:00.0 PM: Adding info for pci:0000:00:01.0 PM: Adding info for pci:0000:00:1d.0 PM: Adding info for pci:0000:00:1d.1 PM: Adding info for pci:0000:00:1d.2 PM: Adding info for pci:0000:00:1d.7 PM: Adding info for pci:0000:00:1e.0 PM: Adding info for pci:0000:00:1f.0 PM: Adding info for pci:0000:00:1f.1 PM: Adding info for pci:0000:00:1f.3 PM: Adding info for pci:0000:00:1f.5 PM: Adding info for pci:0000:00:1f.6 PM: Adding info for pci:0000:01:00.0 PM: Adding info for pci:0000:02:00.0 PM: Adding info for pci:0000:02:00.1 PM: Adding info for pci:0000:02:00.2 PM: Adding info for pci:0000:02:01.0 PM: Adding info for pci:0000:02:02.0 ACPI: Embedded Controller [EC] (gpe 28) interrupt mode. ACPI: Power Resource [PUBS] (on) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report irda_init() NET: Registered protocol family 23 Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized PCI: Bridge: 0000:00:01.0 IO window: 3000-3fff MEM window: c0100000-c01fffff PREFETCH window: e0000000-e7ffffff PCI: Bus 3, cardbus bridge: 0000:02:00.0 IO window: 00004000-000040ff IO window: 00004400-000044ff PREFETCH window: e8000000-e9ffffff MEM window: c2000000-c3ffffff PCI: Bus 7, cardbus bridge: 0000:02:00.1 IO window: 00004800-000048ff IO window: 00004c00-00004cff PREFETCH window: ea000000-ebffffff MEM window: c4000000-c5ffffff PCI: Bridge: 0000:00:1e.0 IO window: 4000-8fff MEM window: c0200000-cfffffff PREFETCH window: e8000000-efffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 acpi_bus-0201 [07] bus_set_power : Device is not power manageable PCI: setting IRQ 11 as level-triggered acpi_bus-0201 [07] bus_set_power : Device is not power manageable NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered PM: Adding info for platform:pcspkr Simple Boot Flag at 0x35 set to 0x80 IBM machine detected. Enabling interrupts during APM calls. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. highmem bounce pool size: 64 pages Coda Kernel/Venus communications, v6.0.0, coda@cs.cmu.edu Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.27 [Flags: R/O DEBUG]. fuse init (API version 7.7) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ibmphpd: IBM Hot Plug PCI Controller Driver version: 0.6 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 decode_hpp: Could not get hotplug parameters. Use defaults acpiphp: Slot [4294967295] registered acpiphp_ibm: ibm_find_acpi_device: Failed to get device information<3>acpiphp_ibm: ibm_find_acpi_device: Failed to get device information<3>acpiphp_ibm: ibm_find_acpi_device: Failed to get device information<3>acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed radeonfb: Retrieved PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=60) Memory=144.00 Mhz, System=144.00 MHz radeonfb: PLL min 12000 max 35000 PM: Adding info for No Bus:i2c-0 PM: Adding info for No Bus:i2c-1 PM: Adding info for No Bus:i2c-2 PM: Adding info for No Bus:i2c-3 Non-DDC laptop panel detected radeonfb: Monitor 1 type LCD found radeonfb: Monitor 2 type no found radeonfb: panel ID string: 1024x768 radeonfb: detected LVDS panel size from BIOS: 1024x768 radeondb: BIOS provided dividers will be used radeonfb: Dynamic Clock Power Management enabled Console: switching to colour frame buffer device 102x42 radeonfb (0000:01:00.0): ATI Radeon LY PM: Adding info for platform:vesafb.0 ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) Using specific hotkey driver ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU] (supports 8 throttling states) ACPI: Thermal Zone [THM0] (57 C) ibm_acpi: IBM ThinkPad ACPI Extras v0.12a ibm_acpi: http://ibm-acpi.sf.net/ acpi_bus-0073 [19] bus_get_device : No context for object [c1d0d464] ibm_acpi: bay device not present lp: driver loaded but no devices found Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones [drm] Initialized drm 1.0.1 20051102 [drm] Initialized radeon 1.25.0 20060524 on minor 0 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled PM: Adding info for platform:serial8250 acpi_bus-0201 [19] bus_set_power : Device is not power manageable ACPI: PCI interrupt for device 0000:00:1f.6 disabled parport0: PC-style at 0x3bc [PCSPP(,...)] lp0: using parport0 (polling). PM: Adding info for No Bus:isa Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 PM: Adding info for platform:floppy.0 loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 7.0.38-k4 Copyright (c) 1999-2006 Intel Corporation. e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:11:25:b2:13:20 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection pcnet32.c:v1.32 18.Mar.2006 tsbogend@alpha.franken.de e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). CSLIP: code copyright 1989 Regents of the University of California. tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky orinoco 0.15 (David Gibson , Pavel Roskin , et al) bcm43xx driver usbcore: registered new driver zd1201 Linux video capture interface: v2.00 bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: HTS541040G9AT00, ATA DISK drive PM: Adding info for No Bus:ide0 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 PM: Adding info for ide:0.0 Probing IDE interface ide1... Probing IDE interface ide1... hda: max request size: 128KiB hda: 78140160 sectors (40007 MB) w/7539KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 libata version 2.00 loaded. PM: Adding info for ieee1394:fw-host0 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[c0211000-c02117ff] Max Packet=[2048] IR/IT contexts=[4/4] ieee1394: raw1394: /dev/raw1394 device initialized ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance Yenta: CardBus bridge found at 0000:02:00.0 [1014:0532] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000810 pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff cs: IO port probe 0x4000-0x8fff: clean. pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff Yenta: CardBus bridge found at 0000:02:00.1 [1014:0532] Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff cs: IO port probe 0x4000-0x8fff: clean. pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff PM: Adding info for platform:i82365.0 Intel ISA PCIC probe: not found. PM: Removing info for platform:i82365.0 Databook TCIC-2 PCMCIA probe: not found. PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 PM: Adding info for usb:usb1 PM: Adding info for No Bus:usbdev1.1_ep00 usb usb1: configuration #1 chosen from 1 choice PM: Adding info for usb:1-0:1.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected PM: Adding info for No Bus:usbdev1.1_ep81 PM: Adding info for No Bus:usbdev1.1 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v3.0 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 PM: Adding info for usb:usb2 PM: Adding info for No Bus:usbdev2.1_ep00 usb usb2: configuration #1 chosen from 1 choice PM: Adding info for usb:2-0:1.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected pccard: PCMCIA card inserted into slot 0 cs: memory probe 0xe8000000-0xefffffff: excluding 0xe8000000-0xefffffff cs: memory probe 0xc0200000-0xcfffffff: excluding 0xc0200000-0xc11fffff 0xc1a00000-0xc61fffff 0xc6a00000-0xc71fffff 0xc7a00000-0xc81fffff 0xc8a00000-0xc91fffff 0xc9a00000-0xca1fffff 0xcaa00000-0xcb1fffff 0xcba00000-0xcc1fffff 0xcca00000-0xcd1fffff 0xcda00000-0xce1fffff 0xcea00000-0xcf1fffff 0xcfa00000-0xd01fffff pcmcia: registering new device pcmcia0.0 PM: Adding info for pcmcia:0.0 PM: Adding info for No Bus:usbdev2.1_ep81 PM: Adding info for No Bus:usbdev2.1 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 PM: Adding info for usb:usb3 PM: Adding info for No Bus:usbdev3.1_ep00 usb usb3: configuration #1 chosen from 1 choice PM: Adding info for usb:3-0:1.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev3.1_ep81 PM: Adding info for No Bus:usbdev3.1 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 PM: Adding info for usb:usb4 PM: Adding info for No Bus:usbdev4.1_ep00 usb usb4: configuration #1 chosen from 1 choice PM: Adding info for usb:4-0:1.0 PM: Adding info for ieee1394:00061b032904c34f hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032904c34f] PM: Adding info for No Bus:usbdev4.1_ep81 PM: Adding info for No Bus:usbdev4.1 usbcore: registered new driver cdc_acm drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver usbcore: registered new driver catc drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver usbcore: registered new driver asix usbcore: registered new driver cdc_ether usbcore: registered new driver net1080 usbcore: registered new driver cdc_subset usbcore: registered new driver zaurus PM: Adding info for platform:i8042 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 PM: Adding info for serio:serio0 PM: Adding info for serio:serio1 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 input: AT Translated Set 2 keyboard as /class/input/input1 PM: Adding info for No Bus:i2c-9191 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com Bluetooth: HCI USB driver ver 2.9 usbcore: registered new driver hci_usb Bluetooth: HCI UART driver ver 2.2 Bluetooth: HCI H4 protocol initialized Bluetooth: HCI BCSP protocol initialized EDAC MC: Ver: 2.0.0 Jun 29 2006 Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC). PCI: Setting latency timer of device 0000:00:1f.5 to 64 input: PS/2 Generic Mouse as /class/input/input2 intel8x0_measure_ac97_clock: measured 56003 usecs intel8x0: clocking to 48000 PM: Adding info for ac97:0-0:AD1981B usbcore: registered new driver snd-usb-audio ALSA device list: #0: Intel 82801DB-ICH4 with AD1981B at 0xc0000c00, irq 11 oprofile: using timer interrupt. ip_conntrack version 2.4 (8192 buckets, 65536 max) - 204 bytes per conntrack ip_tables: (C) 2000-2006 Netfilter Core Team TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 IrCOMM protocol (Dag Brattli) Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.5 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.7 Bluetooth: BNEP (Ethernet Emulation) ver 1.2 Bluetooth: BNEP filters: protocol multicast Bluetooth: HIDP (Human Interface Emulation) ver 1.1 ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' acpi_processor-0758 [18] processor_preregister_: Error while parsing _PSD domain information. Assuming no coordination acpi_processor-0758 [18] processor_preregister_: Error while parsing _PSD domain information. Assuming no coordination Using IPI No-Shortcut mode swsusp: Resume From Partition /dev/hda1 PM: Checking swsusp image. Time: tsc clocksource has been installed. Time: acpi_pm clocksource has been installed. PM: Resume from disk failed. ACPI: (supports S0 S3 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: hda4: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 567856 ext3_orphan_cleanup: deleting unreferenced inode 567854 EXT3-fs: hda4: 2 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 296k freed EXT3 FS on hda4, internal journal Adding 2136448k swap on /dev/hda1. Priority:-1 extents:1 across:2136448k pcmcia: Detected deprecated PCMCIA ioctl usage from process: cardmgr. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. cs: IO port probe 0x310-0x380: excluding 0x370-0x377 cs: IO port probe 0x310-0x380: excluding 0x370-0x377 cs: IO port probe 0xa00-0xaff: clean. cs: IO port probe 0xa00-0xaff: clean. ttyS0: detected caps 00000700 should be 00000100 0.0: ttyS0 at I/O 0x4100 (irq = 7) is a 16C950/954 coda_read_super: Bad mount data coda_read_super: device index: 0 coda_read_super: No pseudo device kjournald starting. Commit interval 6000 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. atkbd.c: Keyboard on isa0060/serio0 reports too many keys pressed.